| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220712160308.13253-4-arun.ramadoss@microchip.com>
Date: Tue, 12 Jul 2022 21:33:01 +0530
From: Arun Ramadoss <arun.ramadoss@...rochip.com>
To: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
CC: Woojung Huh <woojung.huh@...rochip.com>,
<UNGLinuxDriver@...rochip.com>, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
"Russell King" <linux@...linux.org.uk>
Subject: [RFC Patch net-next 03/10] net: dsa: microchip: add common 100/10Mbps selection function
This patch adds the function for configuring the 100/10Mbps speed
selection for the ksz switches. KSZ8795 switch uses Global control 4
register 0x06 bit 4 for choosing 100/10Mpbs. Other switches uses xMII
control 1 0xN300 for it.
For KSZ8795, if the bit is set then 10Mbps is chosen and if bit is
clear then 100Mbps chosen. For all other switches it is other way
around, if the bit is set then 100Mbps is chosen.
So, this patch add the generic function for ksz switch to select the
100/10Mbps speed selection. While configuring, first it disables the
gigabit functionality and then configure the respective speed.
Signed-off-by: Arun Ramadoss <arun.ramadoss@...rochip.com>
---
drivers/net/dsa/microchip/ksz9477_reg.h | 1 -
drivers/net/dsa/microchip/ksz_common.c | 29 ++++++++++++++++++++++++
drivers/net/dsa/microchip/ksz_common.h | 6 +++++
drivers/net/dsa/microchip/lan937x_main.c | 14 ++++--------
drivers/net/dsa/microchip/lan937x_reg.h | 1 -
5 files changed, 40 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index f23ed4809e47..2649fdf0bae1 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -1179,7 +1179,6 @@
#define PORT_SGMII_SEL BIT(7)
#define PORT_MII_FULL_DUPLEX BIT(6)
-#define PORT_MII_100MBIT BIT(4)
#define PORT_GRXC_ENABLE BIT(0)
#define REG_PORT_XMII_CTRL_1 0x0301
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 5ebcd87fc531..f41cd2801210 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -256,6 +256,7 @@ static const u16 ksz8795_regs[] = {
[S_START_CTRL] = 0x01,
[S_BROADCAST_CTRL] = 0x06,
[S_MULTICAST_CTRL] = 0x04,
+ [P_XMII_CTRL_0] = 0x06,
[P_XMII_CTRL_1] = 0x56,
};
@@ -284,6 +285,8 @@ static const u32 ksz8795_masks[] = {
static const u8 ksz8795_values[] = {
[P_MII_1GBIT] = 1,
[P_MII_NOT_1GBIT] = 0,
+ [P_MII_100MBIT] = 0,
+ [P_MII_10MBIT] = 1,
};
static const u8 ksz8795_shifts[] = {
@@ -356,6 +359,7 @@ static const u16 ksz9477_regs[] = {
[S_START_CTRL] = 0x0300,
[S_BROADCAST_CTRL] = 0x0332,
[S_MULTICAST_CTRL] = 0x0331,
+ [P_XMII_CTRL_0] = 0x0300,
[P_XMII_CTRL_1] = 0x0301,
};
@@ -371,11 +375,15 @@ static const u8 ksz9477_shifts[] = {
static const u8 ksz9477_values[] = {
[P_MII_1GBIT] = 0,
[P_MII_NOT_1GBIT] = 1,
+ [P_MII_100MBIT] = 1,
+ [P_MII_10MBIT] = 0,
};
static const u8 ksz9893_values[] = {
[P_MII_1GBIT] = 1,
[P_MII_NOT_1GBIT] = 0,
+ [P_MII_100MBIT] = 1,
+ [P_MII_10MBIT] = 0,
};
static const u32 lan937x_masks[] = {
@@ -1418,6 +1426,27 @@ void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit)
ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
}
+void ksz_set_100_10mbit(struct ksz_device *dev, int port, int speed)
+{
+ const u8 *bitval = dev->info->bitval;
+ const u16 *regs = dev->info->regs;
+ u8 data8;
+
+ ksz_pread8(dev, port, regs[P_XMII_CTRL_0], &data8);
+
+ data8 &= ~P_MII_100MBIT_M;
+
+ ksz_set_gbit(dev, port, false);
+
+ if (speed == SPEED_100)
+ data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_100MBIT]);
+ else
+ data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_10MBIT]);
+
+ /* Write the updated value */
+ ksz_pwrite8(dev, port, regs[P_XMII_CTRL_0], data8);
+}
+
static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index a76dfef6309c..f1fa6feca559 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -172,6 +172,7 @@ enum ksz_regs {
S_START_CTRL,
S_BROADCAST_CTRL,
S_MULTICAST_CTRL,
+ P_XMII_CTRL_0,
P_XMII_CTRL_1,
};
@@ -215,6 +216,8 @@ enum ksz_shifts {
enum ksz_values {
P_MII_1GBIT,
P_MII_NOT_1GBIT,
+ P_MII_100MBIT,
+ P_MII_10MBIT,
};
struct alu_struct {
@@ -304,6 +307,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port);
void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
bool ksz_get_gbit(struct ksz_device *dev, int port);
void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit);
+void ksz_set_100_10mbit(struct ksz_device *dev, int port, int speed);
extern const struct ksz_chip_data ksz_switch_chips[];
/* Common register access functions */
@@ -468,6 +472,8 @@ static inline int is_lan937x(struct ksz_device *dev)
#define SW_START 0x01
/* xMII configuration */
+#define P_MII_100MBIT_M BIT(4)
+
#define P_MII_1GBIT_M BIT(6)
/* Regmap tables generation */
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index efca96b02e15..37f63110e5bb 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -346,21 +346,18 @@ static void lan937x_config_interface(struct ksz_device *dev, int port,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
- u8 xmii_ctrl0, xmii_ctrl1;
+ u8 xmii_ctrl0;
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_0, &xmii_ctrl0);
- ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &xmii_ctrl1);
- xmii_ctrl0 &= ~(PORT_MII_100MBIT | PORT_MII_FULL_DUPLEX |
- PORT_MII_TX_FLOW_CTRL | PORT_MII_RX_FLOW_CTRL);
+ xmii_ctrl0 &= ~(PORT_MII_FULL_DUPLEX | PORT_MII_TX_FLOW_CTRL |
+ PORT_MII_RX_FLOW_CTRL);
if (speed == SPEED_1000)
ksz_set_gbit(dev, port, true);
- else
- ksz_set_gbit(dev, port, false);
- if (speed == SPEED_100)
- xmii_ctrl0 |= PORT_MII_100MBIT;
+ if (speed == SPEED_100 || speed == SPEED_10)
+ ksz_set_100_10mbit(dev, port, speed);
if (duplex)
xmii_ctrl0 |= PORT_MII_FULL_DUPLEX;
@@ -372,7 +369,6 @@ static void lan937x_config_interface(struct ksz_device *dev, int port,
xmii_ctrl0 |= PORT_MII_RX_FLOW_CTRL;
ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_0, xmii_ctrl0);
- ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, xmii_ctrl1);
}
void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h
index 747295d34411..b9364f6a4f8f 100644
--- a/drivers/net/dsa/microchip/lan937x_reg.h
+++ b/drivers/net/dsa/microchip/lan937x_reg.h
@@ -135,7 +135,6 @@
#define PORT_SGMII_SEL BIT(7)
#define PORT_MII_FULL_DUPLEX BIT(6)
#define PORT_MII_TX_FLOW_CTRL BIT(5)
-#define PORT_MII_100MBIT BIT(4)
#define PORT_MII_RX_FLOW_CTRL BIT(3)
#define PORT_GRXC_ENABLE BIT(0)
--
2.36.1
Powered by blists - more mailing lists