| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220712161757.GA1304540@tom-ThinkPad-T14s-Gen-2i>
Date: Tue, 12 Jul 2022 18:17:57 +0200
From: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
To: Jacopo Mondi <jacopo@...ndi.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
linuxfancy@...glegroups.com, linux-amarula@...rulasolutions.com,
quentin.schulz@...obroma-systems.com,
Daniel Scally <djrscally@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 5/6] media: dt-bindings: ov5693: document YAML binding
Hi Jacopo,
On Tue, Jul 12, 2022 at 06:12:36PM +0200, Jacopo Mondi wrote:
> Hi Krzysztof
>
> On Tue, Jul 12, 2022 at 05:32:45PM +0200, Krzysztof Kozlowski wrote:
> > On 12/07/2022 17:25, Jacopo Mondi wrote:
> > > Hi Krzysztof
> > > could you have a look at the below question ?
> >
> > Sorry, there was a bunch of quoted text without end. When you reply
> > under quote, please remove the rest of the quote. None of us have a lot
> > of time to waste on scrolling emails...
> >
>
> I should have kept a counter of the times I've been told "please do
> not remove context, I'm so busy I do not have time to read the whole
> thread" and "please remove context, I'm so busy I cannot read the
> whole email".
>
> After 5 years of kernel development I would now know what to do.
>
> > >
> > > If no need to resend from Tommaso I think the series could be
> > > collected for v5.20.
> > >
> > > On Mon, Jul 11, 2022 at 11:37:05AM +0200, Jacopo Mondi wrote:
> > >> Hi Tommaso, Krzysztof,
> > >>
> > >> This has been reviewed by Krzysztof already, so I guess it's fine,
> > >> but let me ask anyway
> > >>
> > >> On Thu, Jun 30, 2022 at 03:48:34PM +0200, Tommaso Merciai wrote:
> > >>> Add documentation of device tree in YAML schema for the OV5693
> > >>> CMOS image sensor from Omnivision
> > >>>
> > >>> Signed-off-by: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
> > >>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> > >>> ---
> > >>> Changes since v1:
> > >>> - Fix allOf position as suggested by Krzysztof
> > >>> - Remove port description as suggested by Krzysztof
> > >>> - Fix EOF as suggested by Krzysztof
> > >>>
> > >>> Changes since v2:
> > >>> - Fix commit body as suggested by Krzysztof
> > >>>
> > >>> Changes since v3:
> > >>> - Add reviewed-by tags, suggested by Jacopo, Krzysztof
> > >>>
> > >>> Changes since v4:
> > >>> - Remove wrong Sakari reviewed-by tag, suggested by Krzysztof, Sakari
> > >>>
> > >>> .../bindings/media/i2c/ovti,ov5693.yaml | 106 ++++++++++++++++++
> > >>> MAINTAINERS | 1 +
> > >>> 2 files changed, 107 insertions(+)
> > >>> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > >>>
> > >>> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > >>> new file mode 100644
> > >>> index 000000000000..b83c9fc04023
> > >>> --- /dev/null
> > >>> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > >>> @@ -0,0 +1,106 @@
> > >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > >>> +# Copyright (c) 2022 Amarulasolutions
> > >>> +%YAML 1.2
> > >>> +---
> > >>> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
> > >>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > >>> +
> > >>> +title: Omnivision OV5693 CMOS Sensor
> > >>> +
> > >>> +maintainers:
> > >>> + - Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
> > >>> +
> > >>> +description: |
> > >>> + The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
> > >>> + image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
> > >>> + sub-sampled, and windowed 10-bit MIPI images in various formats via the
> > >>> + Serial Camera Control Bus (SCCB) interface.
> > >>> +
> > >>> + OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB).
> > >>> + The sensor output is available via CSI-2 serial data output (up to 2-lane).
> > >>> +
> > >>> +allOf:
> > >>> + - $ref: /schemas/media/video-interface-devices.yaml#
> > >>> +
> > >>> +properties:
> > >>> + compatible:
> > >>> + const: ovti,ov5693
> > >>> +
> > >>> + reg:
> > >>> + maxItems: 1
> > >>> +
> > >>> + clocks:
> > >>> + description:
> > >>> + System input clock (aka XVCLK). From 6 to 27 MHz.
> > >>> + maxItems: 1
> > >>> +
> > >>> + dovdd-supply:
> > >>> + description:
> > >>> + Digital I/O voltage supply, 1.8V.
> > >>> +
> > >>> + avdd-supply:
> > >>> + description:
> > >>> + Analog voltage supply, 2.8V.
> > >>> +
> > >>> + dvdd-supply:
> > >>> + description:
> > >>> + Digital core voltage supply, 1.2V.
> > >>> +
> > >>> + reset-gpios:
> > >>> + description:
> > >>> + The phandle and specifier for the GPIO that controls sensor reset.
> > >>> + This corresponds to the hardware pin XSHUTDN which is physically
> > >>> + active low.
> > >>> + maxItems: 1
> > >>> +
> > >>> +required:
> > >>> + - compatible
> > >>> + - reg
> > >>> + - clocks
> > >>> + - dovdd-supply
> > >>> + - avdd-supply
> > >>> + - dvdd-supply
> > >>
> > >> Should supplies be made mandatory ? Sensors are often powered by fixed
> > >> rails. Do we want DTS writers to create "fixed-regulators" for all of
> > >> them ? The fact the regulator framework creates dummies if there's no
> > >> entry in .dts for a regulator makes me think it's fine to have them
> > >> optional, but I understand how Linux works should not be an indication
> > >> of how a bindings should look like.
> > >>
> > >
> > > This question ^ :)
> >
> > My generic answer for generic devices would be - if resource is
> > physically required (one need to connect the wire), I would say it
> > should be also required in the bindings. This also forces driver
> > developer to think about these resources and might result on
> > portable/better code.
> >
> > However your point is correct that it might create many "fake"
> > regulators, because pretty often these are fixed on the board and not
> > controllable. Therefore I am fine with not requiring them - to adjust
> > the bindings to real life cases.
>
> Tommaso if you can re-send this one with the supplies dropped I think
> the series is still in time for being collected for this merge window
> (Sakari to confirm this).
Perfect, I'll send v6 with your suggestion.
Thanks,
Tommaso
>
> Thanks
> j
>
> >
> > Best regards,
> > Krzysztof
--
Tommaso Merciai
Embedded Linux Engineer
tommaso.merciai@...rulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@...rulasolutions.com
www.amarulasolutions.com
Powered by blists - more mailing lists