| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220712164108.30262-2-kabel@kernel.org>
Date: Tue, 12 Jul 2022 18:40:59 +0200
From: Marek Behún <kabel@...nel.org>
To: Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Pali Rohár <pali@...nel.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Marek Behún <kabel@...nel.org>
Subject: [PATCH v2 01/10] ARM: dts: kirkwood: Add definitions for PCIe legacy INTx interrupts
From: Pali Rohár <pali@...nel.org>
Add definitions for PCIe legacy INTx interrupts.
This is required for example in a scenario where a driver requests only
one of the legacy interrupts (INTA). Without this, the driver would be
notified on events on all 4 (INTA, INTB, INTC, INTD), even if it
requested only one of them.
Signed-off-by: Pali Rohár <pali@...nel.org>
Signed-off-by: Marek Behún <kabel@...nel.org>
---
arch/arm/boot/dts/kirkwood-6192.dtsi | 14 ++++++++++--
arch/arm/boot/dts/kirkwood-6281.dtsi | 14 ++++++++++--
arch/arm/boot/dts/kirkwood-6282.dtsi | 28 ++++++++++++++++++++----
arch/arm/boot/dts/kirkwood-98dx4122.dtsi | 14 ++++++++++--
4 files changed, 60 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
index 396bcba08adb..07f4f7f98c0c 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -26,12 +26,22 @@ pcie0: pcie@1,0 {
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 9>;
+ interrupt-names = "intx";
+ interrupts = <9>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
+
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index faa05849a40d..d08a9a5ecc26 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -26,12 +26,22 @@ pcie0: pcie@1,0 {
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 9>;
+ interrupt-names = "intx";
+ interrupts = <9>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
+
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index e84c54b77dea..2eea5b304f47 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -30,12 +30,22 @@ pcie0: pcie@1,0 {
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 9>;
+ interrupt-names = "intx";
+ interrupts = <9>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+ <0 0 0 2 &pcie0_intc 1>,
+ <0 0 0 3 &pcie0_intc 2>,
+ <0 0 0 4 &pcie0_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
+
+ pcie0_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
pcie1: pcie@2,0 {
@@ -48,12 +58,22 @@ pcie1: pcie@2,0 {
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 10>;
+ interrupt-names = "intx";
+ interrupts = <10>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+ <0 0 0 2 &pcie1_intc 1>,
+ <0 0 0 3 &pcie1_intc 2>,
+ <0 0 0 4 &pcie1_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 18>;
status = "disabled";
+
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
index 299c147298c3..070bc13242b8 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -26,12 +26,22 @@ pcie0: pcie@1,0 {
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 9>;
+ interrupt-names = "intx";
+ interrupts = <9>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
+
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
};
--
2.35.1
Powered by blists - more mailing lists