| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220712164108.30262-7-kabel@kernel.org>
Date: Tue, 12 Jul 2022 18:41:04 +0200
From: Marek Behún <kabel@...nel.org>
To: Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Pali Rohár <pali@...nel.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Marek Behún <kabel@...nel.org>
Subject: [PATCH v2 06/10] ARM: dts: armada-xp-mv78260.dtsi: Add definitions for PCIe legacy INTx interrupts
From: Pali Rohár <pali@...nel.org>
Add definitions for PCIe legacy INTx interrupts.
This is required for example in a scenario where a driver requests only
one of the legacy interrupts (INTA). Without this, the driver would be
notified on events on all 4 (INTA, INTB, INTC, INTD), even if it
requested only one of them.
Signed-off-by: Pali Rohár <pali@...nel.org>
Signed-off-by: Marek Behún <kabel@...nel.org>
---
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 126 +++++++++++++++++++----
1 file changed, 108 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d85fe8ac327..0714af52e607 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -98,16 +98,26 @@ pcie1: pcie@1,0 {
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&mpic 58>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 58>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+ <0 0 0 2 &pcie1_intc 1>,
+ <0 0 0 3 &pcie1_intc 2>,
+ <0 0 0 4 &pcie1_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
+
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
pcie2: pcie@2,0 {
@@ -116,16 +126,26 @@ pcie2: pcie@2,0 {
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&mpic 59>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 59>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+ <0 0 0 2 &pcie2_intc 1>,
+ <0 0 0 3 &pcie2_intc 2>,
+ <0 0 0 4 &pcie2_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
status = "disabled";
+
+ pcie2_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
pcie3: pcie@3,0 {
@@ -134,16 +154,26 @@ pcie3: pcie@3,0 {
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&mpic 60>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 60>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+ <0 0 0 2 &pcie3_intc 1>,
+ <0 0 0 3 &pcie3_intc 2>,
+ <0 0 0 4 &pcie3_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 7>;
status = "disabled";
+
+ pcie3_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
pcie4: pcie@4,0 {
@@ -152,16 +182,26 @@ pcie4: pcie@4,0 {
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&mpic 61>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 61>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+ <0 0 0 2 &pcie4_intc 1>,
+ <0 0 0 3 &pcie4_intc 2>,
+ <0 0 0 4 &pcie4_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 8>;
status = "disabled";
+
+ pcie4_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
pcie5: pcie@5,0 {
@@ -170,16 +210,26 @@ pcie5: pcie@5,0 {
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&mpic 62>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 62>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+ <0 0 0 2 &pcie5_intc 1>,
+ <0 0 0 3 &pcie5_intc 2>,
+ <0 0 0 4 &pcie5_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 9>;
status = "disabled";
+
+ pcie5_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
pcie6: pcie@6,0 {
@@ -188,16 +238,26 @@ pcie6: pcie@6,0 {
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&mpic 63>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 63>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+ <0 0 0 2 &pcie6_intc 1>,
+ <0 0 0 3 &pcie6_intc 2>,
+ <0 0 0 4 &pcie6_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 10>;
status = "disabled";
+
+ pcie6_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
pcie7: pcie@7,0 {
@@ -206,16 +266,26 @@ pcie7: pcie@7,0 {
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&mpic 64>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 64>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+ <0 0 0 2 &pcie7_intc 1>,
+ <0 0 0 3 &pcie7_intc 2>,
+ <0 0 0 4 &pcie7_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 11>;
status = "disabled";
+
+ pcie7_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
pcie8: pcie@8,0 {
@@ -224,16 +294,26 @@ pcie8: pcie@8,0 {
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&mpic 65>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 65>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+ <0 0 0 2 &pcie8_intc 1>,
+ <0 0 0 3 &pcie8_intc 2>,
+ <0 0 0 4 &pcie8_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 12>;
status = "disabled";
+
+ pcie8_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
pcie9: pcie@9,0 {
@@ -242,16 +322,26 @@ pcie9: pcie@9,0 {
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&mpic 99>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+ <0 0 0 2 &pcie9_intc 1>,
+ <0 0 0 3 &pcie9_intc 2>,
+ <0 0 0 4 &pcie9_intc 3>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
status = "disabled";
+
+ pcie9_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
--
2.35.1
Powered by blists - more mailing lists