| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 12 Jul 2022 14:43:21 -0400
From: Nícolas F. R. A. Prado
<nfraprado@...labora.com>
To: Chen-Yu Tsai <wenst@...omium.org>
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
Subject: Re: [PATCH 1/2] clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate
ops
Hi Chen-Yu,
On Tue, Jul 12, 2022 at 07:34:01PM +0800, Chen-Yu Tsai wrote:
> In the previous commits that added CLK_OPS_PARENT_ENABLE, support for
> this flag was only added to rate change operations (rate setting and
> reparent) and disabling unused subtree. It was not added to the
> clock gate related operations. Any hardware driver that needs it for
> these operations will either see bogus results, or worse, hang.
>
> This has been seen on MT8192 and MT8195, where the imp_ii2_* clk
> drivers set this, but dumping debugfs clk_summary would cause it
> to hang.
>
> Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
> Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)")
> Signed-off-by: Chen-Yu Tsai <wenst@...omium.org>
> ---
>
> I'm guessing Stephen might have some things to say about adding forward
> declarations. Moving code around would make the patch larger though.
>
> drivers/clk/clk.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 7fc191c15507..b3de636eec84 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
[..]
> +static int clk_core_enable(struct clk_core *core);
> +static void clk_core_disable(struct clk_core *core);
> +
> static void clk_core_unprepare(struct clk_core *core)
> {
> lockdep_assert_held(&prepare_lock);
> @@ -835,6 +847,9 @@ static void clk_core_unprepare(struct clk_core *core)
>
> WARN(core->enable_count > 0, "Unpreparing enabled %s\n", core->name);
>
> + if (core->flags & CLK_OPS_PARENT_ENABLE)
> + clk_core_enable(core->parent);
Shouldn't it be clk_core_enable_lock ? Otherwise you're calling into
clk_core_enable without the enable_lock, which causes a lot of lockdep warnings
during boot [1]. Same thing for other enable/disable calls below.
Thanks,
Nícolas
[1] Warnings:
<4>[ 5.781843] ------------[ cut here ]------------
<4>[ 5.786823] WARNING: CPU: 5 PID: 1 at drivers/clk/clk.c:982 clk_core_disable+0x6c/0x2a0
<4>[ 5.795258] Modules linked in:
<4>[ 5.798652] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 5.19.0-rc5-next-20220707+ #214
<4>[ 5.808318] Hardware name: Google Spherion (rev0 - 3) (DT)
<4>[ 5.814179] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
<4>[ 5.821548] pc : clk_core_disable+0x6c/0x2a0
<4>[ 5.826176] lr : clk_core_disable+0x68/0x2a0
<4>[ 5.830805] sp : ffff80000808ba50
<4>[ 5.834458] x29: ffff80000808ba50 x28: 0000000000061a80 x27: 00000000000f4240
<4>[ 5.842022] x26: 0000000000000020 x25: ffff23db40f86890 x24: 0000000000000001
<4>[ 5.849587] x23: ffffb70fcbcba008 x22: ffffb70fcc3e1eb8 x21: ffff23db40f86890
<4>[ 5.857152] x20: 0000000000000000 x19: ffff23db40d59d00 x18: 0000000000000028
<4>[ 5.864717] x17: 00000000ffffffff x16: ffffb70fcb632518 x15: 000000000000100a
<4>[ 5.872282] x14: 0000000000000040 x13: 0000000000000040 x12: 0000000000000400
<4>[ 5.879847] x11: 0000000000000080 x10: 000000006a1a6693 x9 : ffffb70fcac15014
<4>[ 5.887412] x8 : 00000000b7258824 x7 : ffffb70fcc6fc7b0 x6 : 0000000000000000
<4>[ 5.894976] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000000c0
<4>[ 5.902540] x2 : ffff23db40258000 x1 : 0000000000000080 x0 : 0000000000000000
<4>[ 5.910105] Call trace:
<4>[ 5.912872] clk_core_disable+0x6c/0x2a0
<4>[ 5.917148] clk_core_prepare+0x1f4/0x430
<4>[ 5.921513] clk_prepare+0x30/0x50
<4>[ 5.925259] clk_bulk_prepare+0x40/0xc0
<4>[ 5.929447] mtk_i2c_probe+0x3b8/0x610
<4>[ 5.933546] platform_probe+0x70/0xe0
<4>[ 5.937558] really_probe+0xc8/0x3b0
<4>[ 5.941479] __driver_probe_device+0x84/0x190
<4>[ 5.946197] driver_probe_device+0x44/0xf8
<4>[ 5.950648] __driver_attach+0xc8/0x1c8
<4>[ 5.954834] bus_for_each_dev+0x78/0xc8
<4>[ 5.959020] driver_attach+0x2c/0x38
<4>[ 5.962941] bus_add_driver+0x184/0x240
<4>[ 5.967127] driver_register+0x6c/0x128
<4>[ 5.971314] __platform_driver_register+0x30/0x40
<4>[ 5.976386] mtk_i2c_driver_init+0x24/0x30
<4>[ 5.980840] do_one_initcall+0x80/0x408
<4>[ 5.985025] kernel_init_freeable+0x2d0/0x358
<4>[ 5.989739] kernel_init+0x2c/0x138
<4>[ 5.993572] ret_from_fork+0x10/0x20
<4>[ 5.997493] irq event stamp: 280038
<4>[ 6.001322] hardirqs last enabled at (280037): [<ffffb70fcb429490>] _raw_spin_unlock_irqrestore+0x80/0xa0
<4>[ 6.011435] hardirqs last disabled at (280038): [<ffffb70fcb415838>] el1_dbg+0x28/0xa0
<4>[ 6.019780] softirqs last enabled at (280028): [<ffffb70fca410698>] __do_softirq+0x488/0x64c
<4>[ 6.028739] softirqs last disabled at (280021): [<ffffb70fca4ab114>] irq_exit_rcu+0x1bc/0x1e8
<4>[ 6.037704] ---[ end trace 0000000000000000 ]---
<4>[ 4.962132] ------------[ cut here ]------------
<4>[ 4.967111] WARNING: CPU: 5 PID: 1 at drivers/clk/clk.c:1041 clk_core_enable+0x74/0x2b8
<4>[ 4.975546] Modules linked in:
<4>[ 4.978940] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 5.19.0-rc5-next-20220707+ #214
<4>[ 4.988606] Hardware name: Google Spherion (rev0 - 3) (DT)
<4>[ 4.994468] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
<4>[ 5.001838] pc : clk_core_enable+0x74/0x2b8
<4>[ 5.006378] lr : clk_core_enable+0x70/0x2b8
<4>[ 5.010918] sp : ffff80000808b9c0
<4>[ 5.014571] x29: ffff80000808b9c0 x28: 0000000000061a80 x27: 00000000000f4240
<4>[ 5.022136] x26: 0000000000000020 x25: ffff23db40f86890 x24: 0000000000000001
<4>[ 5.029701] x23: ffff23db40f86890 x22: 0000000000000004 x21: ffff23db40f86890
<4>[ 5.037266] x20: 0000000000000000 x19: ffff23db40d4fc00 x18: 0000000000000028
<4>[ 5.044830] x17: 00000000ffffffff x16: ffffb70fcb632518 x15: 000000000000100a
<4>[ 5.052395] x14: 0000000000000040 x13: 0000000000000040 x12: 0000000000000400
<4>[ 5.059960] x11: 0000000000000080 x10: 000000006a1a6693 x9 : ffffb70fcac146e4
<4>[ 5.067525] x8 : 00000000b7258824 x7 : ffffb70fcc6fc7b0 x6 : 0000000000000000
<4>[ 5.075089] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 00000000000000c0
<4>[ 5.082655] x2 : ffff23db40258000 x1 : 0000000000000080 x0 : 0000000000000000
<4>[ 5.090220] Call trace:
<4>[ 5.092988] clk_core_enable+0x74/0x2b8
<4>[ 5.097175] clk_core_enable+0x9c/0x2b8
<4>[ 5.101363] clk_core_enable+0x9c/0x2b8
<4>[ 5.105550] clk_core_prepare+0x1e4/0x430
<4>[ 5.109914] clk_prepare+0x30/0x50
<4>[ 5.113660] clk_bulk_prepare+0x40/0xc0
<4>[ 5.117849] mtk_i2c_probe+0x3b8/0x610
<4>[ 5.121948] platform_probe+0x70/0xe0
<4>[ 5.125959] really_probe+0xc8/0x3b0
<4>[ 5.129881] __driver_probe_device+0x84/0x190
<4>[ 5.134597] driver_probe_device+0x44/0xf8
<4>[ 5.139048] __driver_attach+0xc8/0x1c8
<4>[ 5.143235] bus_for_each_dev+0x78/0xc8
<4>[ 5.147420] driver_attach+0x2c/0x38
<4>[ 5.151341] bus_add_driver+0x184/0x240
<4>[ 5.155527] driver_register+0x6c/0x128
<4>[ 5.159714] __platform_driver_register+0x30/0x40
<4>[ 5.164787] mtk_i2c_driver_init+0x24/0x30
<4>[ 5.169241] do_one_initcall+0x80/0x408
<4>[ 5.173426] kernel_init_freeable+0x2d0/0x358
<4>[ 5.178142] kernel_init+0x2c/0x138
<4>[ 5.181974] ret_from_fork+0x10/0x20
<4>[ 5.185895] irq event stamp: 279998
<4>[ 5.189724] hardirqs last enabled at (279997): [<ffffb70fcb416a9c>] exit_to_kernel_mode.isra.0+0x34/0x128
<4>[ 5.199833] hardirqs last disabled at (279998): [<ffffb70fcb415838>] el1_dbg+0x28/0xa0
<4>[ 5.208180] softirqs last enabled at (279996): [<ffffb70fca410698>] __do_softirq+0x488/0x64c
<4>[ 5.217139] softirqs last disabled at (279991): [<ffffb70fca4ab114>] irq_exit_rcu+0x1bc/0x1e8
<4>[ 5.226103] ---[ end trace 0000000000000000 ]---
> +
> trace_clk_unprepare(core);
>
> if (core->ops->unprepare)
> @@ -843,6 +858,9 @@ static void clk_core_unprepare(struct clk_core *core)
> clk_pm_runtime_put(core);
>
> trace_clk_unprepare_complete(core);
> +
> + if (core->flags & CLK_OPS_PARENT_ENABLE)
> + clk_core_disable(core->parent);
> clk_core_unprepare(core->parent);
> }
>
> @@ -891,6 +909,9 @@ static int clk_core_prepare(struct clk_core *core)
> if (ret)
> goto runtime_put;
>
> + if (core->flags & CLK_OPS_PARENT_ENABLE)
> + clk_core_enable(core->parent);
> +
> trace_clk_prepare(core);
>
> if (core->ops->prepare)
> @@ -898,6 +919,9 @@ static int clk_core_prepare(struct clk_core *core)
>
> trace_clk_prepare_complete(core);
>
> + if (core->flags & CLK_OPS_PARENT_ENABLE)
> + clk_core_disable(core->parent);
> +
> if (ret)
> goto unprepare;
> }
> --
> 2.37.0.144.g8ac04bfd2-goog
>
Powered by blists - more mailing lists