| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220712045505.4500-3-jimmy.chen@moxa.com>
Date: Tue, 12 Jul 2022 12:55:04 +0800
From: Jimmy Chen <u7702045@...il.com>
To: Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
soc@...nel.org, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>
Cc: Jimmy Chen <jimmy.chen@...a.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/3] ARM: dts: imx7d: fixed dts for UC-8210/8220 hardware
fix compatible string reference to fsl.yaml
change regulator node name
replace underscore to dash
replace node name
remove 'status' attribute from node
add board compatible and model to ixm7d-moxa-uc-8210.dts
rearrange 82XX alphabet order in Makefile
Signed-off-by: Jimmy Chen <jimmy.chen@...a.com>
---
arch/arm/boot/dts/Makefile | 4 +--
arch/arm/boot/dts/imx7d-moxa-uc-8210.dts | 46 +++++++++++-------------
arch/arm/boot/dts/imx7d-moxa-uc-8220.dts | 9 +++--
3 files changed, 29 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 37db3b60ba43..c9c57626876c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -747,6 +747,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-flex-concentrator-mfg.dtb \
imx7d-mba7.dtb \
imx7d-meerkat96.dtb \
+ imx7d-moxa-uc-8210.dtb \
+ imx7d-moxa-uc-8220.dtb \
imx7d-nitrogen7.dtb \
imx7d-pico-dwarf.dtb \
imx7d-pico-hobbit.dtb \
@@ -755,8 +757,6 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-remarkable2.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb \
- imx7d-moxa-uc-8210.dtb \
- imx7d-moxa-uc-8220.dtb \
imx7d-sdb-reva.dtb \
imx7d-sdb-sht11.dtb \
imx7d-smegw01.dtb \
diff --git a/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts b/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts
index 9ec62d8b510d..fc5a0c7ff295 100644
--- a/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts
+++ b/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts
@@ -1,5 +1,5 @@
-/* SPDX-License-Identifier: GPL-2.0+ OR MIT
- * Copyright (C) 2022 MOXA Inc. - https://www.moxa.com/
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/* Copyright (C) MOXA Inc. All rights reserved.
* Authors: TungYu TY Yang <TungyuTY.Yang@...a.com>
*/
@@ -9,7 +9,7 @@
/ {
model = "Moxa UC-8210";
- compatible = "moxa,uc-8210", "fsl,imx7d-sdb", "fsl,imx7d";
+ compatible = "moxa,uc-8210", "fsl,imx7d";
chosen {
stdout-path = &uart1;
@@ -56,7 +56,7 @@
startup-delay-us = <100>;
};
- reg_sd1_vmmc: regulator@5 {
+ reg_sd1_vmmc: regulator-sd1-3v3 {
compatible = "regulator-fixed";
regulator-name = "VDD_SD1";
regulator-min-microvolt = <3300000>;
@@ -79,58 +79,58 @@
leds {
compatible = "gpio-leds";
- signal_led_1_1 {
+ signal-led-1-1 {
label = "UC8200:YELLOW:SGN1-1";
gpios = <&i2cgpio2 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- signal_led_1_2 {
+ signal-led-1-2 {
label = "UC8200:YELLOW:SGN1-2";
gpios = <&i2cgpio2 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- signal_led_1_3 {
+ signal-led-1-3 {
label = "UC8200:YELLOW:SGN1-3";
gpios = <&i2cgpio2 12 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- signal_led_2_1 {
+ signal-led-2-1 {
label = "UC8200:YELLOW:SGN2-1";
gpios = <&i2cgpio2 13 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- signal_led_2_2 {
+ signal-led-2-2 {
label = "UC8200:YELLOW:SGN2-2";
gpios = <&i2cgpio2 14 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- signal_led_2_3 {
+ signal-led-2-3 {
label = "UC8200:YELLOW:SGN2-3";
gpios = <&i2cgpio2 15 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- user_led_1_1 {
+ user-led-1-1 {
label = "UC8200:YELLOW:USR";
gpios = <&i2cgpio1 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- user_led_1_2 {
+ user-led-1-2 {
label = "UC8200:GREEN:USR";
gpios = <&i2cgpio1 10 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
- buttons: push_button {
+ buttons: gpio-keys {
compatible = "gpio-keys";
- push_button0 {
+ button {
label = "Reset key";
gpios = <&gpio5 11 1>;
linux,code = <0x100>;
@@ -164,7 +164,7 @@
cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
status = "okay";
- tpm_spi_tis@0{
+ tpm-spi-tis@0 {
compatible = "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <500000>;
@@ -344,7 +344,6 @@
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
- status = "okay";
};
};
@@ -395,9 +394,6 @@
pinctrl-0 = <&pinctrl_uart5>;
assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
- /* for DTE mode, add below change */
- /* fsl,dte-mode; */
- /* pinctrl-0 = <&pinctrl_uart5dte>; */
status = "okay";
};
@@ -465,7 +461,7 @@
status = "okay";
flash0: mx25l12805d@0 {
- compatible = "macronix,mx25l12805d";
+ compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
partitions {
@@ -584,7 +580,7 @@
>;
};
- pinctrl_gpio_keys: gpio_keysgrp {
+ pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = <
MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59
MX7D_PAD_SD2_WP__GPIO5_IO10 0x59
@@ -729,7 +725,7 @@
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
@@ -771,7 +767,7 @@
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
@@ -810,7 +806,7 @@
>;
};
- pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
@@ -863,6 +859,4 @@
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
>;
};
-
-
};
diff --git a/arch/arm/boot/dts/imx7d-moxa-uc-8220.dts b/arch/arm/boot/dts/imx7d-moxa-uc-8220.dts
index 6a41cd9e13c6..e66accceeb82 100644
--- a/arch/arm/boot/dts/imx7d-moxa-uc-8220.dts
+++ b/arch/arm/boot/dts/imx7d-moxa-uc-8220.dts
@@ -1,11 +1,16 @@
-/* SPDX-License-Identifier: GPL-2.0
- * Copyright (C) 2019 MOXA Inc. - https://www.moxa.com/
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/* Copyright (C) MOXA Inc. All rights reserved.
* Authors: Fero JD Zhou (周俊達) <FeroJD.Zhou@...a.com>
* Harry YJ Jhou (周亞諄) <HarryYJ.Jhou@...a.com>
*/
#include "imx7d-moxa-uc-8210.dts"
+/ {
+ model = "Moxa UC-8220";
+ compatible = "moxa,uc-8220", "fsl,imx7d";
+};
+
&pcie_phy{
status = "okay";
};
--
2.20.1
Powered by blists - more mailing lists