| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <227b2e0b190b7550462eb177f3b0dde20ec57e6e.camel@redhat.com>
Date: Tue, 12 Jul 2022 14:56:41 +0300
From: Maxim Levitsky <mlevitsk@...hat.com>
To: Vitaly Kuznetsov <vkuznets@...hat.com>, kvm@...r.kernel.org,
Paolo Bonzini <pbonzini@...hat.com>,
Sean Christopherson <seanjc@...gle.com>
Cc: Anirudh Rayabharam <anrayabh@...ux.microsoft.com>,
Wanpeng Li <wanpengli@...cent.com>,
Jim Mattson <jmattson@...gle.com>,
linux-hyperv@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 15/25] KVM: VMX: Extend VMX controls macro shenanigans
On Fri, 2022-07-08 at 16:42 +0200, Vitaly Kuznetsov wrote:
> When VMX controls macros are used to set or clear a control bit, make
> sure that this bit was checked in setup_vmcs_config() and thus is properly
> reflected in vmcs_config.
>
> No functional change intended.
>
> Suggested-by: Sean Christopherson <seanjc@...gle.com>
> Signed-off-by: Vitaly Kuznetsov <vkuznets@...hat.com>
> ---
> arch/x86/kvm/vmx/vmx.c | 99 +++++++------------------------------
> arch/x86/kvm/vmx/vmx.h | 109 +++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 127 insertions(+), 81 deletions(-)
>
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 566be73c6509..93ca9ff8e641 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -2448,7 +2448,6 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
> struct vmx_capability *vmx_cap)
> {
> u32 vmx_msr_low, vmx_msr_high;
> - u32 min, opt, min2, opt2;
> u32 _pin_based_exec_control = 0;
> u32 _cpu_based_exec_control = 0;
> u32 _cpu_based_2nd_exec_control = 0;
> @@ -2474,28 +2473,10 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
> };
>
> memset(vmcs_conf, 0, sizeof(*vmcs_conf));
> - min = CPU_BASED_HLT_EXITING |
> -#ifdef CONFIG_X86_64
> - CPU_BASED_CR8_LOAD_EXITING |
> - CPU_BASED_CR8_STORE_EXITING |
> -#endif
> - CPU_BASED_CR3_LOAD_EXITING |
> - CPU_BASED_CR3_STORE_EXITING |
> - CPU_BASED_UNCOND_IO_EXITING |
> - CPU_BASED_MOV_DR_EXITING |
> - CPU_BASED_USE_TSC_OFFSETTING |
> - CPU_BASED_MWAIT_EXITING |
> - CPU_BASED_MONITOR_EXITING |
> - CPU_BASED_INVLPG_EXITING |
> - CPU_BASED_RDPMC_EXITING |
> - CPU_BASED_INTR_WINDOW_EXITING;
> -
> - opt = CPU_BASED_TPR_SHADOW |
> - CPU_BASED_USE_MSR_BITMAPS |
> - CPU_BASED_NMI_WINDOW_EXITING |
> - CPU_BASED_ACTIVATE_SECONDARY_CONTROLS |
> - CPU_BASED_ACTIVATE_TERTIARY_CONTROLS;
> - if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
> +
> + if (adjust_vmx_controls(KVM_REQ_VMX_CPU_BASED_VM_EXEC_CONTROL,
> + KVM_OPT_VMX_CPU_BASED_VM_EXEC_CONTROL,
> + MSR_IA32_VMX_PROCBASED_CTLS,
> &_cpu_based_exec_control) < 0)
> return -EIO;
OK
> #ifdef CONFIG_X86_64
> @@ -2504,34 +2485,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
> ~CPU_BASED_CR8_STORE_EXITING;
> #endif
> if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_SECONDARY_CONTROLS) {
> - min2 = 0;
> - opt2 = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
> - SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |
> - SECONDARY_EXEC_WBINVD_EXITING |
> - SECONDARY_EXEC_ENABLE_VPID |
> - SECONDARY_EXEC_ENABLE_EPT |
> - SECONDARY_EXEC_UNRESTRICTED_GUEST |
> - SECONDARY_EXEC_PAUSE_LOOP_EXITING |
> - SECONDARY_EXEC_DESC |
> - SECONDARY_EXEC_ENABLE_RDTSCP |
> - SECONDARY_EXEC_ENABLE_INVPCID |
> - SECONDARY_EXEC_APIC_REGISTER_VIRT |
> - SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
> - SECONDARY_EXEC_SHADOW_VMCS |
> - SECONDARY_EXEC_XSAVES |
> - SECONDARY_EXEC_RDSEED_EXITING |
> - SECONDARY_EXEC_RDRAND_EXITING |
> - SECONDARY_EXEC_ENABLE_PML |
> - SECONDARY_EXEC_TSC_SCALING |
> - SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |
> - SECONDARY_EXEC_PT_USE_GPA |
> - SECONDARY_EXEC_PT_CONCEAL_VMX |
> - SECONDARY_EXEC_ENABLE_VMFUNC |
> - SECONDARY_EXEC_BUS_LOCK_DETECTION |
> - SECONDARY_EXEC_NOTIFY_VM_EXITING |
> - SECONDARY_EXEC_ENCLS_EXITING;
> -
> - if (adjust_vmx_controls(min2, opt2,
> + if (adjust_vmx_controls(KVM_REQ_VMX_SECONDARY_VM_EXEC_CONTROL,
> + KVM_OPT_VMX_SECONDARY_VM_EXEC_CONTROL,
> MSR_IA32_VMX_PROCBASED_CTLS2,
> &_cpu_based_2nd_exec_control) < 0)
> return -EIO;
OK
> @@ -2581,30 +2536,20 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
> _cpu_based_2nd_exec_control &= ~SECONDARY_EXEC_ENCLS_EXITING;
>
> if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_TERTIARY_CONTROLS) {
> - u64 opt3 = TERTIARY_EXEC_IPI_VIRT;
> -
> - _cpu_based_3rd_exec_control = adjust_vmx_controls64(opt3,
> - MSR_IA32_VMX_PROCBASED_CTLS3);
> + _cpu_based_3rd_exec_control =
> + adjust_vmx_controls64(KVM_OPT_VMX_TERTIARY_VM_EXEC_CONTROL,
> + MSR_IA32_VMX_PROCBASED_CTLS3);
> }
OK
>
> - min = VM_EXIT_SAVE_DEBUG_CONTROLS | VM_EXIT_ACK_INTR_ON_EXIT;
> -#ifdef CONFIG_X86_64
> - min |= VM_EXIT_HOST_ADDR_SPACE_SIZE;
> -#endif
> - opt = VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL |
> - VM_EXIT_LOAD_IA32_PAT |
> - VM_EXIT_LOAD_IA32_EFER |
> - VM_EXIT_CLEAR_BNDCFGS |
> - VM_EXIT_PT_CONCEAL_PIP |
> - VM_EXIT_CLEAR_IA32_RTIT_CTL;
> - if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_EXIT_CTLS,
> + if (adjust_vmx_controls(KVM_REQ_VMX_VM_EXIT_CONTROLS,
> + KVM_OPT_VMX_VM_EXIT_CONTROLS,
> + MSR_IA32_VMX_EXIT_CTLS,
> &_vmexit_control) < 0)
> return -EIO;
OK.
>
> - min = PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING;
> - opt = PIN_BASED_VIRTUAL_NMIS | PIN_BASED_POSTED_INTR |
> - PIN_BASED_VMX_PREEMPTION_TIMER;
> - if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PINBASED_CTLS,
> + if (adjust_vmx_controls(KVM_REQ_VMX_PIN_BASED_VM_EXEC_CONTROL,
> + KVM_OPT_VMX_PIN_BASED_VM_EXEC_CONTROL,
> + MSR_IA32_VMX_PINBASED_CTLS,
> &_pin_based_exec_control) < 0)
> return -EIO;
OK
>
> @@ -2614,17 +2559,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
> SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY))
> _pin_based_exec_control &= ~PIN_BASED_POSTED_INTR;
>
> - min = VM_ENTRY_LOAD_DEBUG_CONTROLS;
> -#ifdef CONFIG_X86_64
> - min |= VM_ENTRY_IA32E_MODE;
> -#endif
> - opt = VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL |
> - VM_ENTRY_LOAD_IA32_PAT |
> - VM_ENTRY_LOAD_IA32_EFER |
> - VM_ENTRY_LOAD_BNDCFGS |
> - VM_ENTRY_PT_CONCEAL_PIP |
> - VM_ENTRY_LOAD_IA32_RTIT_CTL;
> - if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_ENTRY_CTLS,
> + if (adjust_vmx_controls(KVM_REQ_VMX_VM_ENTRY_CONTROLS,
> + KVM_OPT_VMX_VM_ENTRY_CONTROLS,
> + MSR_IA32_VMX_ENTRY_CTLS,
> &_vmentry_control) < 0)
OK.
> return -EIO;
>
> diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
> index 286c88e285ea..89eaab3495a6 100644
> --- a/arch/x86/kvm/vmx/vmx.h
> +++ b/arch/x86/kvm/vmx/vmx.h
> @@ -467,6 +467,113 @@ static inline u8 vmx_get_rvi(void)
> return vmcs_read16(GUEST_INTR_STATUS) & 0xff;
> }
>
> +#define __KVM_REQ_VMX_VM_ENTRY_CONTROLS \
> + (VM_ENTRY_LOAD_DEBUG_CONTROLS)
> +#ifdef CONFIG_X86_64
> + #define KVM_REQ_VMX_VM_ENTRY_CONTROLS \
> + (__KVM_REQ_VMX_VM_ENTRY_CONTROLS | \
> + VM_ENTRY_IA32E_MODE)
> +#else
> + #define KVM_REQ_VMX_VM_ENTRY_CONTROLS \
> + __KVM_REQ_VMX_VM_ENTRY_CONTROLS
> +#endif
> +#define KVM_OPT_VMX_VM_ENTRY_CONTROLS \
> + (VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL | \
> + VM_ENTRY_LOAD_IA32_PAT | \
> + VM_ENTRY_LOAD_IA32_EFER | \
> + VM_ENTRY_LOAD_BNDCFGS | \
> + VM_ENTRY_PT_CONCEAL_PIP | \
> + VM_ENTRY_LOAD_IA32_RTIT_CTL)
> +
> +#define __KVM_REQ_VMX_VM_EXIT_CONTROLS \
> + (VM_EXIT_SAVE_DEBUG_CONTROLS | \
> + VM_EXIT_ACK_INTR_ON_EXIT)
> +#ifdef CONFIG_X86_64
> + #define KVM_REQ_VMX_VM_EXIT_CONTROLS \
> + (__KVM_REQ_VMX_VM_EXIT_CONTROLS | \
> + VM_EXIT_HOST_ADDR_SPACE_SIZE)
> +#else
> + #define KVM_REQ_VMX_VM_EXIT_CONTROLS \
> + __KVM_REQ_VMX_VM_EXIT_CONTROLS
> +#endif
> +#define KVM_OPT_VMX_VM_EXIT_CONTROLS \
> + (VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL | \
> + VM_EXIT_LOAD_IA32_PAT | \
> + VM_EXIT_LOAD_IA32_EFER | \
> + VM_EXIT_CLEAR_BNDCFGS | \
> + VM_EXIT_PT_CONCEAL_PIP | \
> + VM_EXIT_CLEAR_IA32_RTIT_CTL)
> +
> +#define KVM_REQ_VMX_PIN_BASED_VM_EXEC_CONTROL \
> + (PIN_BASED_EXT_INTR_MASK | \
> + PIN_BASED_NMI_EXITING)
> +#define KVM_OPT_VMX_PIN_BASED_VM_EXEC_CONTROL \
> + (PIN_BASED_VIRTUAL_NMIS | \
> + PIN_BASED_POSTED_INTR | \
> + PIN_BASED_VMX_PREEMPTION_TIMER)
> +
> +#define __KVM_REQ_VMX_CPU_BASED_VM_EXEC_CONTROL \
> + (CPU_BASED_HLT_EXITING | \
> + CPU_BASED_CR3_LOAD_EXITING | \
> + CPU_BASED_CR3_STORE_EXITING | \
> + CPU_BASED_UNCOND_IO_EXITING | \
> + CPU_BASED_MOV_DR_EXITING | \
> + CPU_BASED_USE_TSC_OFFSETTING | \
> + CPU_BASED_MWAIT_EXITING | \
> + CPU_BASED_MONITOR_EXITING | \
> + CPU_BASED_INVLPG_EXITING | \
> + CPU_BASED_RDPMC_EXITING | \
> + CPU_BASED_INTR_WINDOW_EXITING)
> +
> +#ifdef CONFIG_X86_64
> + #define KVM_REQ_VMX_CPU_BASED_VM_EXEC_CONTROL \
> + (__KVM_REQ_VMX_CPU_BASED_VM_EXEC_CONTROL | \
> + CPU_BASED_CR8_LOAD_EXITING | \
> + CPU_BASED_CR8_STORE_EXITING)
> +#else
> + #define KVM_REQ_VMX_CPU_BASED_VM_EXEC_CONTROL \
> + __KVM_REQ_VMX_CPU_BASED_VM_EXEC_CONTROL
> +#endif
> +
> +#define KVM_OPT_VMX_CPU_BASED_VM_EXEC_CONTROL \
> + (CPU_BASED_TPR_SHADOW | \
> + CPU_BASED_USE_MSR_BITMAPS | \
> + CPU_BASED_NMI_WINDOW_EXITING | \
> + CPU_BASED_ACTIVATE_SECONDARY_CONTROLS | \
> + CPU_BASED_ACTIVATE_TERTIARY_CONTROLS)
> +
> +#define KVM_REQ_VMX_SECONDARY_VM_EXEC_CONTROL 0
> +#define KVM_OPT_VMX_SECONDARY_VM_EXEC_CONTROL \
> + (SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES | \
> + SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE | \
> + SECONDARY_EXEC_WBINVD_EXITING | \
> + SECONDARY_EXEC_ENABLE_VPID | \
> + SECONDARY_EXEC_ENABLE_EPT | \
> + SECONDARY_EXEC_UNRESTRICTED_GUEST | \
> + SECONDARY_EXEC_PAUSE_LOOP_EXITING | \
> + SECONDARY_EXEC_DESC | \
> + SECONDARY_EXEC_ENABLE_RDTSCP | \
> + SECONDARY_EXEC_ENABLE_INVPCID | \
> + SECONDARY_EXEC_APIC_REGISTER_VIRT | \
> + SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY | \
> + SECONDARY_EXEC_SHADOW_VMCS | \
> + SECONDARY_EXEC_XSAVES | \
> + SECONDARY_EXEC_RDSEED_EXITING | \
> + SECONDARY_EXEC_RDRAND_EXITING | \
> + SECONDARY_EXEC_ENABLE_PML | \
> + SECONDARY_EXEC_TSC_SCALING | \
> + SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE | \
> + SECONDARY_EXEC_PT_USE_GPA | \
> + SECONDARY_EXEC_PT_CONCEAL_VMX | \
> + SECONDARY_EXEC_ENABLE_VMFUNC | \
> + SECONDARY_EXEC_BUS_LOCK_DETECTION | \
> + SECONDARY_EXEC_NOTIFY_VM_EXITING | \
> + SECONDARY_EXEC_ENCLS_EXITING)
> +
> +#define KVM_REQ_VMX_TERTIARY_VM_EXEC_CONTROL 0
> +#define KVM_OPT_VMX_TERTIARY_VM_EXEC_CONTROL \
> + (TERTIARY_EXEC_IPI_VIRT)
> +
> #define BUILD_CONTROLS_SHADOW(lname, uname, bits) \
> static inline void lname##_controls_set(struct vcpu_vmx *vmx, u##bits val) \
> { \
> @@ -485,10 +592,12 @@ static inline u##bits lname##_controls_get(struct vcpu_vmx *vmx) \
> } \
> static inline void lname##_controls_setbit(struct vcpu_vmx *vmx, u##bits val) \
> { \
> + BUILD_BUG_ON(!(val & (KVM_REQ_VMX_##uname | KVM_OPT_VMX_##uname))); \
> lname##_controls_set(vmx, lname##_controls_get(vmx) | val); \
> } \
> static inline void lname##_controls_clearbit(struct vcpu_vmx *vmx, u##bits val) \
> { \
> + BUILD_BUG_ON(!(val & (KVM_REQ_VMX_##uname | KVM_OPT_VMX_##uname))); \
> lname##_controls_set(vmx, lname##_controls_get(vmx) & ~val); \
> }
> BUILD_CONTROLS_SHADOW(vm_entry, VM_ENTRY_CONTROLS, 32)
I cross checked that all bits were copied correctly.
This patch is a very nice idea!
Reviewed-by: Maxim Levitsky <mlevitsk@...hat.com>
Best regards,
Maxim Levitsky
Powered by blists - more mailing lists