[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220713225151.1476041-2-robert.marko@sartura.hr>
Date: Thu, 14 Jul 2022 00:51:51 +0200
From: Robert Marko <robert.marko@...tura.hr>
To: linus.walleij@...aro.org, colin.foster@...advantage.com,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Robert Marko <robert.marko@...tura.hr>
Subject: [PATCH 2/2] pinctrl: ocelot: fix pinconf
Commit "pinctrl: ocelot: convert pinctrl to regmap" moved to using
regmap_read/write, however it neglected to also carry out alignment
to register stride of 4.
This would cause the following error:
[ 1.720873] pinctrl-ocelot 6110101e0.pinctrl: pin_config_set op failed for pin 34
[ 1.728110] sdhci-sparx5 600800000.mmc: Error applying setting, reverse things back
So, regmap_read would return -EINVAL as it was being passed address
of the pin without stride, so for example pin 34 would end up being
0x22 in hex.
Fix this by accouting for the stride in register address.
Fixes: 076d9e71bcf8 ("pinctrl: ocelot: convert pinctrl to regmap")
Signed-off-by: Robert Marko <robert.marko@...tura.hr>
---
drivers/pinctrl/pinctrl-ocelot.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index 84bfbe649b67..a71145367b15 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -1327,7 +1327,9 @@ static int ocelot_hw_get_value(struct ocelot_pinctrl *info,
if (info->pincfg) {
u32 regcfg;
- ret = regmap_read(info->pincfg, pin, ®cfg);
+ ret = regmap_read(info->pincfg,
+ pin * regmap_get_reg_stride(info->pincfg),
+ ®cfg);
if (ret)
return ret;
@@ -1359,14 +1361,18 @@ static int ocelot_pincfg_clrsetbits(struct ocelot_pinctrl *info, u32 regaddr,
u32 val;
int ret;
- ret = regmap_read(info->pincfg, regaddr, &val);
+ ret = regmap_read(info->pincfg,
+ regaddr * regmap_get_reg_stride(info->pincfg),
+ &val);
if (ret)
return ret;
val &= ~clrbits;
val |= setbits;
- ret = regmap_write(info->pincfg, regaddr, val);
+ ret = regmap_write(info->pincfg,
+ regaddr * regmap_get_reg_stride(info->pincfg),
+ val);
return ret;
}
--
2.36.1
Powered by blists - more mailing lists