| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aec4ffd0-368d-e71a-06e4-a084138fbab9@linaro.org>
Date: Wed, 13 Jul 2022 09:11:07 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: dj76.yang@...sung.com,
"jesper.nilsson@...s.com" <jesper.nilsson@...s.com>,
"lars.persson@...s.com" <lars.persson@...s.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzk+dt@...nel.org" <krzk+dt@...nel.org>,
"lee.jones@...aro.org" <lee.jones@...aro.org>
Cc: "javierm@...hat.com" <javierm@...hat.com>,
"bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
"linux-arm-kernel@...s.com" <linux-arm-kernel@...s.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Moon-Ki Jun <moonki.jun@...sung.com>,
Sang Min Kim <hypmean.kim@...sung.com>,
Wangseok Lee <wangseok.lee@...sung.com>
Subject: Re: [PATCH 2/4] firmware: Samsung: Add secure monitor driver
On 13/07/2022 06:55, Dongjin Yang wrote:
> Introduce a driver to provide calls into secure monitor mode.
> This driver is used for SoCs produced by Samsung Foundry to provide
> SMC call. This patch supports register read/write request to secure
> monitor. Also, SMC call request which uses shared memory to exchange
> the data between kernel and secure monitor.
>
> Signed-off-by: Dongjin Yang <dj76.yang@...sung.com>
> ---
> MAINTAINERS | 2 +
> drivers/firmware/Kconfig | 11 +++
> drivers/firmware/Makefile | 1 +
> drivers/firmware/samsung-smc-svc.c | 154 +++++++++++++++++++++++++++++++
> include/linux/firmware/samsung-smc-svc.h | 59 ++++++++++++
> 5 files changed, 227 insertions(+)
> create mode 100644 drivers/firmware/samsung-smc-svc.c
> create mode 100644 include/linux/firmware/samsung-smc-svc.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6763746c349f..d173043ffb46 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1868,8 +1868,10 @@ F: arch/arm/boot/dts/artpec6*
> F: arch/arm/mach-artpec
> F: drivers/clk/axis
> F: drivers/crypto/axis
> +F: drivers/firmware/samsung-smc-svc.c
> F: drivers/mmc/host/usdhi6rol0.c
> F: drivers/pinctrl/pinctrl-artpec*
> +F: include/linux/firmware/samsung-smc-svc.h
Same as for bindings - not related to Artpec platforms. Either add
dedicated entry or put it under Samsung SoC.
>
> ARM/ASPEED I2C DRIVER
> M: Brendan Higgins <brendanhiggins@...gle.com>
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index e5cfb01353d8..4b0f2d033f58 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -217,6 +217,17 @@ config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
>
> Say Y here to enable "download mode" by default.
>
> +config SAMSUNG_SECURE_SERVICE
> + bool "Samsung Foundry Secure Service Layer"
> + depends on HAVE_ARM_SMCCC
> + default n
> + help
> + Support secure service layer for SoCs which is manufactured by
> + Samsung Foundry.
> +
> + This option provide support of secure monitor service call using
> + Trusted Foundations.
> +
> config SYSFB
> bool
> default y
> diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
> index 4e58cb474a68..985e30a9665f 100644
> --- a/drivers/firmware/Makefile
> +++ b/drivers/firmware/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
> obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
> obj-$(CONFIG_QCOM_SCM) += qcom-scm.o
> qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
> +obj-$(CONFIG_SAMSUNG_SECURE_SERVICE) += samsung-smc-svc.o
> obj-$(CONFIG_SYSFB) += sysfb.o
> obj-$(CONFIG_SYSFB_SIMPLEFB) += sysfb_simplefb.o
> obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
> diff --git a/drivers/firmware/samsung-smc-svc.c b/drivers/firmware/samsung-smc-svc.c
> new file mode 100644
> index 000000000000..eb3a5285cf2b
> --- /dev/null
> +++ b/drivers/firmware/samsung-smc-svc.c
> @@ -0,0 +1,154 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 Samsung Electronics Co., Ltd.
> + * Author: Kihyun Yoon<kihyun.yoon@...sung.com>
> + * Author: Dongjin Yang<dj76.yang@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
Drop boiler plate with trailing empty '*' comment.
> + */
> +
> +#include <linux/types.h>
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/firmware/samsung-smc-svc.h>
Order the headers by name.
> +
> +struct samsung_smc_version {
> + u32 major;
> + u32 minor;
> +};
> +
> +struct samsung_smc_data {
> + struct samsung_smc_version version;
> + u32 svc_cmd_list[SAMSUNG_SIP_NR_SIP];
> +};
> +
> +struct samsung_smc_data *svc_data;
No, no globals. Even no static variables.
> +
> +static int samsung_smc_svc_init(void);
> +
> +static int __samsung_get_svc_cmd(u32 cmd_idx)
> +{
> + if (cmd_idx >= SAMSUNG_SIP_NR_SIP)
> + return SAMSUNG_SIP_NOT_SUPPORTED;
> +
> + /* Initialize this driver if it is not ready */
> + if (!svc_data && samsung_smc_svc_init()) {
> + pr_err("samsung,smccc_service initialization is failed\n");
> + return SAMSUNG_SIP_NOT_SUPPORTED;
> + }
> +
> + return svc_data->svc_cmd_list[cmd_idx];
> +}
> +
> +int samsung_smc_call(u32 cmd_idx,
> + unsigned long a0, unsigned long a1,
> + unsigned long a2, unsigned long a3,
> + u32 *val)
> +
> +{
> + struct arm_smccc_res res;
> + u32 cmd = __samsung_get_svc_cmd(cmd_idx);
> +
> + if (cmd == SAMSUNG_SIP_NOT_SUPPORTED)
> + return -EOPNOTSUPP;
> +
> + arm_smccc_smc(cmd, a0, a1, a2, a3, 0, 0, 0, &res);
> + if (res.a0 == SMCCC_RET_NOT_SUPPORTED)
> + return -EINVAL;
> +
> + if (val)
> + *val = (u32)res.a1;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(samsung_smc_call);
EXPORT_SYMBOL_GPL
You need kerneldoc for all these.
> +
> +int samsung_smc_reg_read(void *base, u32 reg, u32 *val)
> +{
> + return samsung_smc_call(SAMSUNG_SIP_READ_REG,
> + (unsigned long)base, reg, 0, 0, val);
> +}
> +EXPORT_SYMBOL(samsung_smc_reg_read);
> +
> +int samsung_smc_reg_write(void *base, u32 reg, u32 val)
> +{
> + return samsung_smc_call(SAMSUNG_SIP_WRITE_REG,
> + (unsigned long)base, reg, val, 0, NULL);
> +}
> +EXPORT_SYMBOL(samsung_smc_reg_write);
> +
> +static int samsung_smc_check_version(struct samsung_smc_version *ver)
> +{
> + struct arm_smccc_res res;
> +
> + arm_smccc_smc(SAMSUNG_SIP_SVC_VERSION, 0, 0, 0, 0, 0, 0, 0, &res);
> +
> + if ((u32)res.a0 != ver->major || (u32)res.a1 != ver->minor)
> + return -EINVAL;
> +
> + pr_info("Samsung SVC version [%d.%d] is detected\n",
> + ver->major, ver->minor);
> +
> + return 0;
> +}
> +
> +static const struct samsung_smc_data svc_0_1 = {
> + .version = {
> + .major = 0,
> + .minor = 1
> + },
> + .svc_cmd_list = {
> + [SAMSUNG_SIP_READ_REG] = 0x82000020,
> + [SAMSUNG_SIP_WRITE_REG] = 0x82000021,
> + /* TODO: SMC call for clock driver should be added */
> + }
> +};
> +
> +static const struct of_device_id samsung_smc_of_match[] = {
> + { .compatible = "samsung,smccc-svc", .data = &svc_0_1 },
> + { /* sentinel */ }
> +};
> +
> +static int samsung_smc_svc_init(void)
> +{
> + struct device_node *fw_np;
> + struct device_node *np;
> + const struct of_device_id *match;
> + int ret;
> +
> + if (svc_data) {
> + pr_info("samsung,smccc_service is already initialized\n");
> + return 0;
> + }
> +
> + fw_np = of_find_node_by_name(NULL, "firmware");
> + if (!fw_np)
> + return -ENODEV;
> +
> + np = of_find_matching_node_and_match(fw_np, samsung_smc_of_match,
> + &match);
> + if (!np)
> + return -ENODEV;
> +
> + svc_data = (struct samsung_smc_data *)match->data;
> + if (!svc_data)
> + return -ENODEV;
> +
> + ret = samsung_smc_check_version(&svc_data->version);
> + if (ret) {
> + pr_err("samsung svc version is not matched\n");
> + return ret;
> + }
> +
> + pr_info("samsung smc svc is initialized\n");
No useless success printks. We have tracing and sysfs for that.
> + return 0;
> +}
> +
> +early_initcall(samsung_smc_svc_init);
No. Make it a platform driver.
> diff --git a/include/linux/firmware/samsung-smc-svc.h b/include/linux/firmware/samsung-smc-svc.h
> new file mode 100644
> index 000000000000..9c94fd3e10a2
> --- /dev/null
> +++ b/include/linux/firmware/samsung-smc-svc.h
> @@ -0,0 +1,59 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#ifndef __SAMSUNG_SMC_H
> +#define __SAMSUNG_SMC_H
Extend the header gaurd to match path.
> +
> +#include <linux/arm-smccc.h>
> +
> +#ifdef CONFIG_SAMSUNG_SECURE_SERVICE
No ifdefs in headers. This is not a subsystem.
> +
> +#define SAMSUNG_SIP_CALL_VAL(x) \
> + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, \
> + ARM_SMCCC_SMC_32, ARM_SMCCC_OWNER_SIP, x)
Need kerneldoc.
> +
> +/* Common SIP SVC number */
> +#define SAMSUING_SIP_SVC_CALL_COUNT SAMSUNG_SIP_CALL_VAL(0xff00)
> +#define SAMSUING_SIP_SVC_UID SAMSUNG_SIP_CALL_VAL(0xff01)
> +#define SAMSUNG_SIP_SVC_VERSION SAMSUNG_SIP_CALL_VAL(0xff03)
> +#define SAMSUNG_SIP_NOT_SUPPORTED 0x0
Need kerneldoc.
> +
> +enum {
> + /* SIP enumeration for V0.1 */
> + SAMSUNG_SIP_READ_REG,
> + SAMSUNG_SIP_WRITE_REG,
> + /* Add here for later version */
> + SAMSUNG_SIP_NR_SIP
> +};
Need kerneldoc.
> +
> +int samsung_smc_call(u32 cmd_idx,
> + unsigned long a0, unsigned long a1,
> + unsigned long a2, unsigned long a3,
> + u32 *val);
> +int samsung_smc_reg_read(void *addr, unsigned int reg, u32 *val);
> +int samsung_smc_reg_write(void *addr, unsigned int reg, u32 val);
> +
Need kerneldoc in the driver.
> +#else
> +
No stubs, no ifdefs. It's not a subsystem.
Best regards,
Krzysztof
Powered by blists - more mailing lists