[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220713074118.14733-1-frieder@fris.de>
Date: Wed, 13 Jul 2022 09:41:11 +0200
From: Frieder Schrempf <frieder@...s.de>
To: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Li Yang <leoyang.li@....com>,
Shawn Guo <shawnguo@...nel.org>
Cc: Frieder Schrempf <frieder.schrempf@...tron.de>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH 0/6] arm64: dts: imx8mm-kontron: Improvements and OSM board support
From: Frieder Schrempf <frieder.schrempf@...tron.de>
This set contains a few small improvements for the imx8mm-kontron devicetrees
(patch 1 to 4) and support for a new SoM (patch 5-6, including baseboard) that
complies to the Open Standard Module (OSM) 1.0 hardware specification, size S
(https://sget.org/standards/osm).
Frieder Schrempf (6):
arm64: dts: imx8mm-kontron: Adjust board and SoM model strings
arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card
IO voltage
arm64: dts: imx8mm-kontron: Remove low DDRC operating point
arm64: dts: imx8mm-kontron: Use upper case PMIC regulator names
arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S
dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
.../devicetree/bindings/arm/fsl.yaml | 6 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx8mm-kontron-n801x-s.dts | 5 +-
.../freescale/imx8mm-kontron-n801x-som.dtsi | 30 +-
.../dts/freescale/imx8mm-kontron-n802x-s.dts | 377 ++++++++++++++++++
.../freescale/imx8mm-kontron-n802x-som.dtsi | 309 ++++++++++++++
6 files changed, 709 insertions(+), 19 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-s.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-som.dtsi
--
2.37.0
Powered by blists - more mailing lists