[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0457d6f70457447e639ba06f24fc39fb5e467724.camel@mediatek.com>
Date: Wed, 13 Jul 2022 16:03:19 +0800
From: CK Hu <ck.hu@...iatek.com>
To: Bo-Chen Chen <rex-bc.chen@...iatek.com>, <chunkuang.hu@...nel.org>,
<p.zabel@...gutronix.de>, <daniel@...ll.ch>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <mripard@...nel.org>,
<tzimmermann@...e.de>, <matthias.bgg@...il.com>, <deller@....de>,
<airlied@...ux.ie>
CC: <msp@...libre.com>, <granquet@...libre.com>,
<jitao.shi@...iatek.com>, <wenst@...omium.org>,
<angelogioacchino.delregno@...labora.com>,
<liangxu.xu@...iatek.com>, <dri-devel@...ts.freedesktop.org>,
<linux-mediatek@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-fbdev@...r.kernel.org>,
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [PATCH v14 05/10] drm/mediatek: Add MT8195 Embedded DisplayPort
driver
Hi, Bo-Chen:
On Tue, 2022-07-12 at 19:12 +0800, Bo-Chen Chen wrote:
> From: Markus Schneider-Pargmann <msp@...libre.com>
>
> This patch adds a embedded displayport driver for the MediaTek mt8195
> SoC.
>
> It supports the MT8195, the embedded DisplayPort units. It offers
> DisplayPort 1.4 with up to 4 lanes.
>
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so
> that
> both can work with the same register range. The phy driver sets
> device
> data that is read by the parent to get the phy device that can be
> used
> to control the phy properties.
>
> This driver is based on an initial version by
> Jitao shi <jitao.shi@...iatek.com>
>
> Signed-off-by: Markus Schneider-Pargmann <msp@...libre.com>
> Signed-off-by: Guillaume Ranquet <granquet@...libre.com>
> Signed-off-by: Bo-Chen Chen <rex-bc.chen@...iatek.com>
> ---
[snip]
> +
> +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev)
> +{
> + struct mtk_dp *mtk_dp = dev;
> +
> + if (mtk_dp->train_info.cable_state_change) {
> + mtk_dp->train_info.cable_state_change = false;
> +
> + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
> + DP_PWR_STATE_BANDGAP_TPLL_LANE,
> + DP_PWR_STATE_MASK);
You set cable_state_change to true in isr handler just to update a
register in isr thread. I think you could just update this register in
isr handler and drop cable_state_change.
Regards,
CK
> + }
> +
> + if (mtk_dp->train_info.irq_sta.hpd_inerrupt) {
> + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n");
> + mtk_dp->train_info.irq_sta.hpd_inerrupt = false;
> + mtk_dp_hpd_sink_event(mtk_dp);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
Powered by blists - more mailing lists