linux-kernel - [PATCH v3] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220713131722.2316829-1-vamshigajjela@google.com>
Date:   Wed, 13 Jul 2022 18:47:22 +0530
From:   Vamshi Gajjela <vamshigajjela@...gle.com>
To:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>
Cc:     Miquel Raynal <miquel.raynal@...tlin.com>,
        Phil Edworthy <phil.edworthy@...esas.com>,
        Emil Renner Berthing <kernel@...il.dk>,
        Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
        Johan Hovold <johan@...nel.org>, linux-serial@...r.kernel.org,
        linux-kernel@...r.kernel.org, manugautam@...gle.com,
        VAMSHI GAJJELA <vamshigajjela@...gle.com>
Subject: [PATCH v3] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo

From: VAMSHI GAJJELA <vamshigajjela@...gle.com>

With PSLVERR_RESP_EN parameter set to 1, the device generates an error
response when an attempt to read an empty RBR with FIFO enabled.

This happens when LCR writes are ignored when UART is busy.
dw8250_check_lcr() in retries to update LCR, invokes dw8250_force_idle()
to clear and reset FIFO and eventually reads UART_RX causing the error.

Avoid this by not reading RBR/UART_RX when no data is available.

Signed-off-by: VAMSHI GAJJELA <vamshigajjela@...gle.com>
---
v3:
- check lsr based on FIFO enablement
v2:
- update as per review comments (re-format comments, xmas tree ordering)
 drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f57bbd32ef11..7573904579f6 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -82,8 +82,21 @@ static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
 static void dw8250_force_idle(struct uart_port *p)
 {
 	struct uart_8250_port *up = up_to_u8250p(p);
+	unsigned int lsr;
 
 	serial8250_clear_and_reinit_fifos(up);
+
+	/*
+	 * With PSLVERR_RESP_EN parameter set to 1, the device generates an
+	 * error response when an attempt to read an empty RBR with FIFO
+	 * enabled.
+	 */
+	if (up->fcr & UART_FCR_ENABLE_FIFO) {
+		lsr = p->serial_in(p, UART_LSR);
+		if (!(lsr & UART_LSR_DR))
+			return;
+	}
+
 	(void)p->serial_in(p, UART_RX);
 }
 
-- 
2.37.0.144.g8ac04bfd2-goog