lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220713025233.27248-6-samuel@sholland.org>
Date:   Tue, 12 Jul 2022 21:52:32 -0500
From:   Samuel Holland <samuel@...lland.org>
To:     Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Andre Przywara <andre.przywara@....com>
Cc:     Samuel Holland <samuel@...lland.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Maxime Ripard <mripard@...nel.org>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...ts.linux.dev,
        Heiko Stuebner <heiko@...ech.de>
Subject: [PATCH v2 5/6] pinctrl: sunxi: Make some layout parameters dynamic

Starting with the D1/D1s/T113 SoC, Allwinner changed the layout of the
pinctrl registers. This new layout widens the drive level field, which
affects the pull register offset and the overall bank size.

In order to support multiple register layouts, some of the layout
parameters need to be set based on the pinctrl variant. This requires
passing the pinctrl struct pointer to the register/offset calculation
functions.

Reviewed-by: Jernej Skrabec <jernej.skrabec@...il.com>
Reviewed-by: Heiko Stuebner <heiko@...ech.de>
Tested-by: Heiko Stuebner <heiko@...ech.de>
Signed-off-by: Samuel Holland <samuel@...lland.org>
---

(no changes since v1)

 drivers/pinctrl/sunxi/pinctrl-sunxi.c | 44 ++++++++++++++++-----------
 drivers/pinctrl/sunxi/pinctrl-sunxi.h |  3 ++
 2 files changed, 29 insertions(+), 18 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 78b7ab69d7a5..ec7daaa5666b 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -59,45 +59,49 @@ static struct irq_chip sunxi_pinctrl_level_irq_chip;
  * The following functions calculate the register and the bit offset to access.
  * They take a pin number which is relative to the start of the current device.
  */
-static void sunxi_mux_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask)
+static void sunxi_mux_reg(const struct sunxi_pinctrl *pctl,
+			  u32 pin, u32 *reg, u32 *shift, u32 *mask)
 {
 	u32 bank   = pin / PINS_PER_BANK;
 	u32 offset = pin % PINS_PER_BANK * MUX_FIELD_WIDTH;
 
-	*reg   = bank * BANK_MEM_SIZE + MUX_REGS_OFFSET +
+	*reg   = bank * pctl->bank_mem_size + MUX_REGS_OFFSET +
 		 offset / BITS_PER_TYPE(u32) * sizeof(u32);
 	*shift = offset % BITS_PER_TYPE(u32);
 	*mask  = (BIT(MUX_FIELD_WIDTH) - 1) << *shift;
 }
 
-static void sunxi_data_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask)
+static void sunxi_data_reg(const struct sunxi_pinctrl *pctl,
+			   u32 pin, u32 *reg, u32 *shift, u32 *mask)
 {
 	u32 bank   = pin / PINS_PER_BANK;
 	u32 offset = pin % PINS_PER_BANK * DATA_FIELD_WIDTH;
 
-	*reg   = bank * BANK_MEM_SIZE + DATA_REGS_OFFSET +
+	*reg   = bank * pctl->bank_mem_size + DATA_REGS_OFFSET +
 		 offset / BITS_PER_TYPE(u32) * sizeof(u32);
 	*shift = offset % BITS_PER_TYPE(u32);
 	*mask  = (BIT(DATA_FIELD_WIDTH) - 1) << *shift;
 }
 
-static void sunxi_dlevel_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask)
+static void sunxi_dlevel_reg(const struct sunxi_pinctrl *pctl,
+			     u32 pin, u32 *reg, u32 *shift, u32 *mask)
 {
 	u32 bank   = pin / PINS_PER_BANK;
-	u32 offset = pin % PINS_PER_BANK * DLEVEL_FIELD_WIDTH;
+	u32 offset = pin % PINS_PER_BANK * pctl->dlevel_field_width;
 
-	*reg   = bank * BANK_MEM_SIZE + DLEVEL_REGS_OFFSET +
+	*reg   = bank * pctl->bank_mem_size + DLEVEL_REGS_OFFSET +
 		 offset / BITS_PER_TYPE(u32) * sizeof(u32);
 	*shift = offset % BITS_PER_TYPE(u32);
-	*mask  = (BIT(DLEVEL_FIELD_WIDTH) - 1) << *shift;
+	*mask  = (BIT(pctl->dlevel_field_width) - 1) << *shift;
 }
 
-static void sunxi_pull_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask)
+static void sunxi_pull_reg(const struct sunxi_pinctrl *pctl,
+			   u32 pin, u32 *reg, u32 *shift, u32 *mask)
 {
 	u32 bank   = pin / PINS_PER_BANK;
 	u32 offset = pin % PINS_PER_BANK * PULL_FIELD_WIDTH;
 
-	*reg   = bank * BANK_MEM_SIZE + PULL_REGS_OFFSET +
+	*reg   = bank * pctl->bank_mem_size + pctl->pull_regs_offset +
 		 offset / BITS_PER_TYPE(u32) * sizeof(u32);
 	*shift = offset % BITS_PER_TYPE(u32);
 	*mask  = (BIT(PULL_FIELD_WIDTH) - 1) << *shift;
@@ -508,18 +512,19 @@ static const struct pinctrl_ops sunxi_pctrl_ops = {
 	.get_group_pins		= sunxi_pctrl_get_group_pins,
 };
 
-static int sunxi_pconf_reg(unsigned pin, enum pin_config_param param,
+static int sunxi_pconf_reg(const struct sunxi_pinctrl *pctl,
+			   u32 pin, enum pin_config_param param,
 			   u32 *reg, u32 *shift, u32 *mask)
 {
 	switch (param) {
 	case PIN_CONFIG_DRIVE_STRENGTH:
-		sunxi_dlevel_reg(pin, reg, shift, mask);
+		sunxi_dlevel_reg(pctl, pin, reg, shift, mask);
 		break;
 
 	case PIN_CONFIG_BIAS_PULL_UP:
 	case PIN_CONFIG_BIAS_PULL_DOWN:
 	case PIN_CONFIG_BIAS_DISABLE:
-		sunxi_pull_reg(pin, reg, shift, mask);
+		sunxi_pull_reg(pctl, pin, reg, shift, mask);
 		break;
 
 	default:
@@ -540,7 +545,7 @@ static int sunxi_pconf_get(struct pinctrl_dev *pctldev, unsigned pin,
 
 	pin -= pctl->desc->pin_base;
 
-	ret = sunxi_pconf_reg(pin, param, &reg, &shift, &mask);
+	ret = sunxi_pconf_reg(pctl, pin, param, &reg, &shift, &mask);
 	if (ret < 0)
 		return ret;
 
@@ -606,7 +611,7 @@ static int sunxi_pconf_set(struct pinctrl_dev *pctldev, unsigned pin,
 		param = pinconf_to_config_param(configs[i]);
 		arg = pinconf_to_config_argument(configs[i]);
 
-		ret = sunxi_pconf_reg(pin, param, &reg, &shift, &mask);
+		ret = sunxi_pconf_reg(pctl, pin, param, &reg, &shift, &mask);
 		if (ret < 0)
 			return ret;
 
@@ -774,7 +779,7 @@ static void sunxi_pmx_set(struct pinctrl_dev *pctldev,
 	unsigned long flags;
 
 	pin -= pctl->desc->pin_base;
-	sunxi_mux_reg(pin, &reg, &shift, &mask);
+	sunxi_mux_reg(pctl, pin, &reg, &shift, &mask);
 
 	raw_spin_lock_irqsave(&pctl->lock, flags);
 
@@ -917,7 +922,7 @@ static int sunxi_pinctrl_gpio_get(struct gpio_chip *chip, unsigned offset)
 	u32 pin = offset + chip->base;
 	u32 reg, shift, mask, val;
 
-	sunxi_data_reg(offset, &reg, &shift, &mask);
+	sunxi_data_reg(pctl, offset, &reg, &shift, &mask);
 
 	if (set_mux)
 		sunxi_pmx_set(pctl->pctl_dev, pin, SUN4I_FUNC_INPUT);
@@ -937,7 +942,7 @@ static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip,
 	u32 reg, shift, mask, val;
 	unsigned long flags;
 
-	sunxi_data_reg(offset, &reg, &shift, &mask);
+	sunxi_data_reg(pctl, offset, &reg, &shift, &mask);
 
 	raw_spin_lock_irqsave(&pctl->lock, flags);
 
@@ -1489,6 +1494,9 @@ int sunxi_pinctrl_init_with_variant(struct platform_device *pdev,
 	pctl->dev = &pdev->dev;
 	pctl->desc = desc;
 	pctl->variant = variant;
+	pctl->bank_mem_size = BANK_MEM_SIZE;
+	pctl->pull_regs_offset = PULL_REGS_OFFSET;
+	pctl->dlevel_field_width = DLEVEL_FIELD_WIDTH;
 
 	pctl->irq_array = devm_kcalloc(&pdev->dev,
 				       IRQ_PER_BANK * pctl->desc->irq_banks,
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index efaa97457e08..c705828add73 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -169,6 +169,9 @@ struct sunxi_pinctrl {
 	raw_spinlock_t			lock;
 	struct pinctrl_dev		*pctl_dev;
 	unsigned long			variant;
+	u32				bank_mem_size;
+	u32				pull_regs_offset;
+	u32				dlevel_field_width;
 };
 
 #define SUNXI_PIN(_pin, ...)					\
-- 
2.35.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ