linux-kernel - RE: [PATCH v2] arm64: dts: rockchip: Fix SD card init on rk3399-nanopi4

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <eec07acea8694191a75880acc397dafe@hyperstone.com>
Date:   Thu, 14 Jul 2022 16:44:08 +0000
From:   Christian Loehle <CLoehle@...erstone.com>
To:     Christian Kohlschütter 
        <christian@...lschutter.com>, Robin Murphy <robin.murphy@....com>,
        Markus Reichl <m.reichl@...etechno.de>,
        Heiko Stübner <heiko@...ech.de>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-rockchip@...ts.infradead.org" 
        <linux-rockchip@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Linux MMC List <linux-mmc@...r.kernel.org>
Subject: RE: [PATCH v2] arm64: dts: rockchip: Fix SD card init on
 rk3399-nanopi4

I only briefly skimmed the discussion, but does this mean that a soft-reset (CMD0) of a UHS (post-voltage-switch) will not work?
(As the card/spec requires a power-cycle by the host which will not come, right?)
Can you try this real quick? I can give you a mmc-utils snippet if you have trouble issuing one.
If that does indeed not work I think the general approach is to disable uhs in the dts or at least document that.
Regards,
Christian

-----Original Message-----
From: Christian Kohlschütter <christian@...lschutter.com> 
Sent: Donnerstag, 14. Juli 2022 18:27
To: Robin Murphy <robin.murphy@....com>; Markus Reichl <m.reichl@...etechno.de>; Heiko Stübner <heiko@...ech.de>; linux-arm-kernel@...ts.infradead.org; linux-rockchip@...ts.infradead.org; linux-kernel@...r.kernel.org; Linux MMC List <linux-mmc@...r.kernel.org>
Subject: [PATCH v2] arm64: dts: rockchip: Fix SD card init on rk3399-nanopi4

mmc/SD-card initialization may fail on NanoPi r4s with
"mmc1: problem reading SD Status register" /
"mmc1: error -110 whilst initialising SD card"

Moreover, rebooting would also sometimes hang.

This is caused by the gpio entry for the vcc3v0-sd regulator;
even though it appears to be the correct GPIO pin, the presence
of the binding causes these errors.

Fix the regulator to drop the gpio binding and add a comment
to prevent accidental reintroduction of that entry.

Signed-off-by: Christian Kohlschütter <christian@...lschutter.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 8c0ff6c96e03..d5f8a62e01be 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -67,7 +67,7 @@ vcc1v8_s3: vcc1v8-s3 {
 	vcc3v0_sd: vcc3v0-sd {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		// gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; // breaks SDHC card support
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc0_pwr_h>;
 		regulator-always-on;
-- 
2.36.1



Hyperstone GmbH | Reichenaustr. 39a  | 78467 Konstanz
Managing Director: Dr. Jan Peter Berns.
Commercial register of local courts: Freiburg HRB381782