Message-ID: <SEYPR01MB42728CF8B51CE8E9300D89A0FA889@SEYPR01MB4272.apcprd01.prod.exchangelabs.com>
Date:   Thu, 14 Jul 2022 08:55:35 +0000
From:   Jimmy Chen (陳永達) <jimmy.chen@...a.com>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Jimmy Chen <u7702045@...il.com>, Arnd Bergmann <arnd@...db.de>,
        Olof Johansson <olof@...om.net>,
        "soc@...nel.org" <soc@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>
CC:     "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v3 1/2] ARM: dts: imx7d: add dts for UC-8210/8220 hardware

-----Original Message-----
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> 
Sent: Thursday, July 14, 2022 4:19 PM
To: Jimmy Chen <u7702045@...il.com>; Arnd Bergmann <arnd@...db.de>; Olof Johansson <olof@...om.net>; soc@...nel.org; Rob Herring <robh+dt@...nel.org>; Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>; Shawn Guo <shawnguo@...nel.org>; Sascha Hauer <s.hauer@...gutronix.de>; Pengutronix Kernel Team <kernel@...gutronix.de>; Fabio Estevam <festevam@...il.com>; NXP Linux Team <linux-imx@....com>
Cc: Jimmy Chen (陳永達) <jimmy.chen@...a.com>; linux-arm-kernel@...ts.infradead.org; devicetree@...r.kernel.org; linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/2] ARM: dts: imx7d: add dts for UC-8210/8220 hardware

On 14/07/2022 05:06, Jimmy Chen wrote:
> Add 2 models hardware dts provided by MOXA company
> 
> Signed-off-by: Jimmy Chen <jimmy.chen@...a.com>
> ---
> Changes in v3:
>   - Fix compatible string reference to fsl.yaml
>   - Change regulator node name
>   - Replace underscore to dash
>   - Replace node name
>   - Remove 'status' attribute from node
>   - Add board compatible and model to ixm7d-moxa-uc-8210.dts
>   - Rearrange 82XX alphabet order in Makefile
>   - Rearrange 82XX alphabet order in fsl
> 
>  arch/arm/boot/dts/Makefile               |   2 +
>  arch/arm/boot/dts/imx7d-moxa-uc-8210.dts | 862 +++++++++++++++++++++++
>  arch/arm/boot/dts/imx7d-moxa-uc-8220.dts |  22 +
>  3 files changed, 886 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx7d-moxa-uc-8210.dts
>  create mode 100644 arch/arm/boot/dts/imx7d-moxa-uc-8220.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5112f493f494..c9c57626876c 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -747,6 +747,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
>  	imx7d-flex-concentrator-mfg.dtb \
>  	imx7d-mba7.dtb \
>  	imx7d-meerkat96.dtb \
> +	imx7d-moxa-uc-8210.dtb \
> +	imx7d-moxa-uc-8220.dtb \
>  	imx7d-nitrogen7.dtb \
>  	imx7d-pico-dwarf.dtb \
>  	imx7d-pico-hobbit.dtb \
> diff --git a/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts b/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts
> new file mode 100644
> index 000000000000..fc5a0c7ff295
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts
> @@ -0,0 +1,862 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> +/* Copyright (C) MOXA Inc. All rights reserved.
> + * Authors: TungYu TY Yang <TungyuTY.Yang@...a.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx7d.dtsi"
> +
> +/ {
> +	model = "Moxa UC-8210";
> +	compatible = "moxa,uc-8210", "fsl,imx7d";
> +
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	memory@...00000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x80000000>;
> +	};
> +
> +	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_otg1_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_otg2_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_vref_1v8: regulator-vref-1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vref-1v8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	reg_wl: regulator-wl {
> +		compatible = "regulator-fixed";
> +		gpio = <&gpio4 20 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-name = "wl_reg";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <100>;
> +	};
> +
> +	reg_sd1_vmmc: regulator-sd1-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDD_SD1";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
> +		startup-delay-us = <200000>;
> +		off-on-delay = <20000>;
> +		enable-active-high;
> +	};
> +
> +	reg_can2_3v3: regulator-can2-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "can2-3v3";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_flexcan2_reg>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		signal-led-1-1 {
> +			label = "UC8200:YELLOW:SGN1-1";
> +			gpios = <&i2cgpio2 4 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		signal-led-1-2 {
> +			label = "UC8200:YELLOW:SGN1-2";
> +			gpios = <&i2cgpio2 5 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		signal-led-1-3 {
> +			label = "UC8200:YELLOW:SGN1-3";
> +			gpios = <&i2cgpio2 12 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		signal-led-2-1 {
> +			label = "UC8200:YELLOW:SGN2-1";
> +			gpios = <&i2cgpio2 13 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		signal-led-2-2 {
> +			label = "UC8200:YELLOW:SGN2-2";
> +			gpios = <&i2cgpio2 14 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		signal-led-2-3 {
> +			label = "UC8200:YELLOW:SGN2-3";
> +			gpios = <&i2cgpio2 15 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		user-led-1-1 {
> +			label = "UC8200:YELLOW:USR";
> +			gpios = <&i2cgpio1 9 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +		user-led-1-2 {
> +			label = "UC8200:GREEN:USR";
> +			gpios = <&i2cgpio1 10 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +	};
> +
> +	buttons: gpio-keys {

Why do you need the label here?
Jimmy> Will fix
> +		compatible = "gpio-keys";
> +
> +		button {
> +			label = "Reset key";
> +			gpios = <&gpio5 11 1>;
> +			linux,code = <0x100>;
> +			default-state = "on";
> +		};
> +	};
> +};
> +
> +&adc1 {
> +	vref-supply = <&reg_vref_1v8>;
> +	status = "okay";
> +};
> +
> +&adc2 {
> +	vref-supply = <&reg_vref_1v8>;
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&sw1a_reg>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&sw1a_reg>;
> +};
> +
> +&ecspi1 {
> +	fsl,spi-num-chipselects = <1>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi1>;
> +	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +
> +	tpm-spi-tis@0 {

Node name stll not correct. This is tpm, isn't it?
https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdevicetree-specification.readthedocs.io%2Fen%2Flatest%2Fchapter2-devicetree-basics.html%23generic-names-recommendation&amp;data=05%7C01%7Cjimmy.chen%40moxa.com%7C440ff1356efd4810f58b08da65718c20%7C5571c7d4286b47f69dd50aa688773c8e%7C0%7C0%7C637933835622691697%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=OmcSB3oDQi59xuP2qtXZzTJhWZJ82%2Fjhn8CGkz6hm2A%3D&amp;reserved=0

Jimmy> Will fix
(...)

> +
> +&qspi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_qspi1_1>;
> +	status = "okay";
> +
> +	flash0: mx25l12805d@0 {

Still wrong node name.

This does not pass `make dtbs_check`, so NAK.
Jimmy> I did and it passed before I send patch. Below is my command
#make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/fsl.yaml


> +		compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
> +		spi-max-frequency = <20000000>;
> +		reg = <0>;
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			/* reg : The partition's offset and size within the mtd bank. */
> +			partitions@0 {
> +				label = "mlo";
> +				reg = <0x0 0x100000>;
> +			};
> +
> +			partitions@1 {
> +				label = "u-boot 1";
> +				reg = <0x100000 0x100000>;
> +			};
> +
> +			partitions@2 {
> +				label = "u-boot 2";
> +				reg = <0x200000 0x100000>;
> +			};
> +
> +			partitions@3 {
> +				label = "u-boot env 1";
> +				reg = <0x300000 0x20000>;
> +			};
> +
> +			partitions@4 {
> +				label = "u-boot env 2";
> +				reg = <0x320000 0x20000>;
> +			};
> +
> +			partitions@5 {
> +				label = "syslog";
> +				reg = <0x500000 0x100000>;
> +			};
> +
> +			partitions@6 {
> +				label = "storage";
> +				reg = <0x600000 0x200000>;
> +			};
> +		};
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	imx7d-sdb {
> +		pinctrl_ecspi1: ecspi1grp {
> +			fsl,pins = <
> +				MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
> +				MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
> +				MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
> +				MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x2
> +			>;
> +		};
> +
> +		pinctrl_ecspi3: ecspi3grp {
> +			fsl,pins = <
> +				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
> +				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
> +				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
> +				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x80000000
> +			>;
> +		};
> +
> +		pinctrl_enet1: enet1grp {
> +			fsl,pins = <
> +				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
> +				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
> +				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
> +				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
> +				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
> +				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
> +				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
> +				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
> +				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
> +				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
> +				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
> +				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
> +				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
> +				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
> +			>;
> +		};
> +
> +		pinctrl_enet2: enet2grp {
> +			fsl,pins = <
> +				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
> +				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
> +				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
> +				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
> +				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
> +				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
> +				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
> +				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
> +				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
> +				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
> +				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
> +				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
> +			>;
> +		};
> +
> +		pinctrl_flexcan2: flexcan2grp {
> +			fsl,pins = <
> +				MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
> +				MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
> +			>;
> +		};
> +
> +		pinctrl_flexcan2_reg: flexcan2reggrp {
> +			fsl,pins = <
> +				MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
> +			>;
> +		};
> +
> +		pinctrl_gpio_keys: gpio-keysgrp {
> +			fsl,pins = <
> +				MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
> +				MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
> +			>;
> +		};
> +
> +		pinctrl_hog: hoggrp {
> +			fsl,pins = <
> +				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x15	/*LTE_PWR_EN*/
> +				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34	/* bt reg on */
> +				MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x59	/* WL_REG_ON */
> +			>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <
> +				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
> +				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
> +			>;
> +		};
> +
> +		pinctrl_i2c2: i2c2grp {
> +			fsl,pins = <
> +				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
> +				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
> +			>;
> +		};
> +
> +		pinctrl_i2c3: i2c3grp {
> +			fsl,pins = <
> +				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
> +				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
> +			>;
> +		};
> +
> +		pinctrl_i2c4: i2c4grp {
> +			fsl,pins = <
> +				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
> +				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
> +			>;
> +		};
> +
> +		pinctrl_lcdif: lcdifgrp {
> +			fsl,pins = <
> +				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
> +				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
> +				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
> +				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
> +				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
> +				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
> +				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
> +				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
> +				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
> +				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
> +				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
> +				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
> +				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
> +				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
> +				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
> +				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
> +				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
> +				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
> +				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
> +				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
> +				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
> +				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
> +				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
> +				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
> +				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
> +				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
> +				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
> +				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
> +				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
> +			>;
> +		};
> +
> +		pinctrl_sai1: sai1grp {
> +			fsl,pins = <
> +				MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
> +				MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
> +				MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
> +				MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
> +				MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
> +			>;
> +		};
> +
> +		pinctrl_sai2: sai2grp {
> +			fsl,pins = <
> +				MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK     0x1f
> +				MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC     0x1f
> +				MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0    0x30
> +				MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0    0x1f
> +			>;
> +		};
> +
> +		pinctrl_sai3: sai3grp {
> +			fsl,pins = <
> +				MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK   0x1f
> +				MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC     0x1f
> +				MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0    0x30
> +			>;
> +		};
> +
> +		pinctrl_spi4: spi4grp {
> +			fsl,pins = <
> +				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
> +				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
> +				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
> +			>;
> +		};
> +
> +		pinctrl_tsc2046_pendown: tsc2046_pendown {

No improvements here.
Jimmy> Will fix

> +			fsl,pins = <
> +				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
> +			>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <
> +				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
> +				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
> +			>;
> +		};
> +
> +		pinctrl_uart5: uart5grp {
> +			fsl,pins = <
> +				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
> +				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
> +				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
> +				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
> +			>;
> +		};
> +
> +		pinctrl_usdhc1: usdhc1grp {
> +			fsl,pins = <
> +				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
> +				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
> +				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
> +				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
> +				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
> +				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
> +			>;
> +		};
> +
> +		pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
> +			fsl,pins = <
> +				MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
> +				MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
> +				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
> +				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
> +				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
> +				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
> +			>;
> +		};
> +
> +		pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {


Really? So you fixed a node before, but this one left ignored? You
received comments, so please apply them EVERYWHERE.
Jimmy> Will do

Best regards,
Krzysztof

Powered by blists - more mailing lists