lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 15 Jul 2022 14:39:06 +0800
From:   sdlyyxy <sdlyyxy@...t.edu.cn>
To:     Greg KH <gregkh@...uxfoundation.org>
Cc:     johan@...nel.org, linux-usb@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] USB: serial: option: adding support for OPPO R11 diag
 port

Hi Greg,
Thanks for your comments!

> On Jul 14, 2022, at 18:56, Greg KH <gregkh@...uxfoundation.org> wrote:
> 
> On Thu, Jul 14, 2022 at 06:20:37PM +0800, sdlyyxy wrote:
>> From: Yan Xinyu <sdlyyxy@...t.edu.cn>
>> 
>> This patch adds support for OPPO R11 USB diag serial port to option
>> driver. This phone uses Qualcomm Snapdragon 660 SoC.
>> 
>> usb-devices output:
>> T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
>> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
>> P: Vendor=22d9 ProdID=276c Rev=04.04
>> S: Manufacturer=OPPO
>> S: Product=SDM660-MTP _SN:09C6BCA7
>> S: SerialNumber=beb2c403
>> C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
>> I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> 
> I do not think this has an option usb-serial chip in the device, this is
> a phone with a debug port instead.
> 
Yeah, this phone uses a Qualcomm chip, not an option usb-serial chip.
It has the functionality to enter into a special mode, which provides 
a QCDM-capable diag port as the same behaviour of USB modems. For
Qualcomm devices, there are several drivers: qcserial, qcaux, and 
option. According to qcserial.c, qcaux.c source code and mailing list
conversations [1], this device with diag+adb layout should be driven
by option.
>> I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
> 
> What userspace program is bound to this endpoint?
> 
I think it is used by adb via libusb.
>> 
>> Signed-off-by: Yan Xinyu <sdlyyxy@...t.edu.cn>
>> ---
>> drivers/usb/serial/option.c | 5 +++++
>> 1 file changed, 5 insertions(+)
>> 
>> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
>> index de59fa919540..cf65cb84c3ca 100644
>> --- a/drivers/usb/serial/option.c
>> +++ b/drivers/usb/serial/option.c
>> @@ -573,6 +573,10 @@ static void option_instat_callback(struct urb *urb);
>> #define WETELECOM_PRODUCT_6802			0x6802
>> #define WETELECOM_PRODUCT_WMD300		0x6803
>> 
>> +/* OPPO products */
>> +#define OPPO_VENDOR_ID				0x22d9
>> +#define OPPO_PRODUCT_R11			0x276c
>> +
>> 
>> /* Device flags */
>> 
>> @@ -2155,6 +2159,7 @@ static const struct usb_device_id option_ids[] = {
>> 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
>> 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
>> 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */
>> +	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
> 
> This does not look correct, sorry. Try using the usbserial generic
> driver instead to transmit and recieve?
> 
Yes I have tried using usbserial generic driver. As for the interface
#0x0 diag port, it seems working. However, in the same time the 
generic driver will also be attached to interface #0x1, which causes
nonfunction of adb. Using this patch, diag and adb can run 
simultaneously. So it's better than the generic driver?

[1] https://patchwork.kernel.org/project/linux-usb/patch/20180623212408.15221-1-aleksander@aleksander.es/

Thanks,
Sdlyyxy



Powered by blists - more mailing lists