Message-ID: <YtFTrEzefxIYswnj@matsya>
Date:   Fri, 15 Jul 2022 17:16:52 +0530
From:   Vinod Koul <vkoul@...nel.org>
To:     Frank Wunderlich <linux@...web.de>
Cc:     linux-rockchip@...ts.infradead.org,
        Frank Wunderlich <frank-w@...lic-files.de>,
        Kishon Vijay Abraham I <kishon@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Heiko Stuebner <heiko@...ech.de>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Johan Jonker <jbx6244@...il.com>,
        Yifeng Zhao <yifeng.zhao@...k-chips.com>,
        Peter Geis <pgwipeout@...il.com>,
        Michael Riesch <michael.riesch@...fvision.net>,
        Liang Chen <cl@...k-chips.com>, Simon Xue <xxm@...k-chips.com>,
        Shawn Lin <shawn.lin@...k-chips.com>,
        linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 3/5] phy: rockchip: Support PCIe v3

On 19-06-22, 10:26, Frank Wunderlich wrote:
> From: Shawn Lin <shawn.lin@...k-chips.com>
> 
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated PCIe-phy. Add support for this.
> 
> Initial support by Shawn Lin, modifications by Peter Geis and Frank
> Wunderlich.
> 
> Add data-lanes property for splitting pcie-lanes across controllers.
> 
> The data-lanes is an array where x=0 means lane is disabled and  x > 0
> means controller x is assigned to phy lane.
> 
> Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>
> Suggested-by: Peter Geis <pgwipeout@...il.com>
> Signed-off-by: Frank Wunderlich <frank-w@...lic-files.de>
> ---
> v4:
> - change u8 lane-map to u32 data-lanes
> 
> v3:
> - change dt-binding include
> - change reset to devm_reset_control_get_optional_exclusive
>   exit on error and lower severity of message if unset
> - fix from peter: disable reg-write for phy-mode in rockchip_p3phy_probe
> - move bifurcation/lane-map support from PCIe to phy driver
> 
> v2:
> - move dt-bindings header into separate patch
> - use BIT-macro
> - make constants better readable
> - use dev_err instead of pr_*
> - change dt-binding include due to renaming (phy-snps-pcie3.h => phy-rockchip-pcie3.h)
> - use exclusive variant of devm_reset_control_get{,_exclusive}
> - fix semicolon.cocci warnings reported by kernel test robot <lkp@...el.com>
> 
> ---
> driver was taken from linux 5.10 based on in
> https://github.com/JeffyCN/mirrors
> which now has disappeared
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix messages for data-lanes
> 
> Update phy-rockchip-snps-pcie3.c
> 
> Fix comment for data-lanes
> ---
>  drivers/phy/rockchip/Kconfig                  |   9 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
>  include/linux/phy/pcie.h                      |  12 +
>  4 files changed, 339 insertions(+)
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
>  create mode 100644 include/linux/phy/pcie.h
> 
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> index 9022e395c056..94360fc96a6f 100644
> --- a/drivers/phy/rockchip/Kconfig
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
>  	help
>  	  Enable this to support the Rockchip PCIe PHY.
>  
> +config PHY_ROCKCHIP_SNPS_PCIE3
> +	tristate "Rockchip Snps PCIe3 PHY Driver"
> +	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	select GENERIC_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the Rockchip snps PCIe3 PHY.
> +
>  config PHY_ROCKCHIP_TYPEC
>  	tristate "Rockchip TYPEC PHY Driver"
>  	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> index a5041efb5b8f..7eab129230d1 100644
> --- a/drivers/phy/rockchip/Makefile
> +++ b/drivers/phy/rockchip/Makefile
> @@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
>  obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
>  obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
> +obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
>  obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
> diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> new file mode 100644
> index 000000000000..e2be53492618
> --- /dev/null
> +++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip PCIE3.0 phy driver
> + *
> + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.

2022 now :)

> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/pcie.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +/* Register for RK3568 */
> +#define GRF_PCIE30PHY_CON1			0x4
> +#define GRF_PCIE30PHY_CON6			0x18
> +#define GRF_PCIE30PHY_CON9			0x24
> +#define GRF_PCIE30PHY_STATUS0			0x80
> +#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
> +
> +#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
> +
> +/* Register for RK3588 */
> +#define PHP_GRF_PCIESEL_CON			0x100
> +#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
> +#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
> +#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
> +#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
> +
> +#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
> +#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
> +#define RK3588_LANE_AGGREGATION		BIT(2)
> +
> +struct rockchip_p3phy_ops;
> +
> +struct rockchip_p3phy_priv {
> +	const struct rockchip_p3phy_ops *ops;
> +	void __iomem *mmio;
> +	/* mode: RC, EP */
> +	int mode;
> +	/* pcie30_phymode: Aggregation, Bifurcation */
> +	int pcie30_phymode;
> +	struct regmap *phy_grf;
> +	struct regmap *pipe_grf;
> +	struct reset_control *p30phy;
> +	struct phy *phy;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	int num_lanes;
> +	u32 lanes[4];
> +};
> +
> +struct rockchip_p3phy_ops {
> +	int (*phy_init)(struct rockchip_p3phy_priv *priv);
> +};
> +
> +static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	/* Actually We don't care EP/RC mode, but just record it */
> +	switch (submode) {
> +	case PHY_MODE_PCIE_RC:
> +		priv->mode = PHY_MODE_PCIE_RC;
> +		break;
> +	case PHY_MODE_PCIE_EP:
> +		priv->mode = PHY_MODE_PCIE_EP;
> +		break;
> +	default:
> +		dev_err(&phy->dev, "%s, invalid mode\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
> +{
> +	struct phy *phy = priv->phy;
> +	bool bifurcation = false;
> +	int ret;
> +	u32 reg;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, BIT(15) | BIT(31));

Can we define these bits..?

> +
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> +		if (priv->lanes[i] > 1)
> +			bifurcation = true;
> +	}
> +
> +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> +	if (bifurcation) {
> +		dev_info(&phy->dev, "bifurcation enabled\n");
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) | RK3568_BIFURCATION_LANE_0_1);

upper word 0xf?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> +			     BIT(15) | BIT(31));

again define bits please

> +	} else {
> +		dev_info(&phy->dev, "bifurcation disabled\n");

debug level?

> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     (0xf << 16) & ~RK3568_BIFURCATION_LANE_0_1);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       GRF_PCIE30PHY_STATUS0,
> +				       reg, SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	if (ret)
> +		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);
> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3568_ops = {
> +	.phy_init = rockchip_p3phy_rk3568_init,
> +};
> +
> +static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
> +{
> +	u32 reg = 0;
> +	u8 mode = 0;
> +	int ret;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
> +
> +	/* Set bifurcation if needed */
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		if (!priv->lanes[i])
> +			mode |= (BIT(i) << 3);
> +
> +		if (priv->lanes[i] > 1)
> +			mode |= (BIT(i) >> 1);
> +	}
> +
> +	if (!mode)
> +		reg = RK3588_LANE_AGGREGATION;
> +	else {
> +		if (mode & (BIT(0) | BIT(1)))
> +			reg |= RK3588_BIFURCATION_LANE_0_1;
> +
> +		if (mode & (BIT(2) | BIT(3)))
> +			reg |= RK3588_BIFURCATION_LANE_2_3;
> +	}
> +
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
> +
> +	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
> +	if (!IS_ERR(priv->pipe_grf)) {
> +		reg = (mode & (BIT(6) | BIT(7))) >> 6;
> +		if (reg)
> +			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
> +				     (reg << 16) | reg);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
> +				       reg, RK3588_SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	ret |= regmap_read_poll_timeout(priv->phy_grf,
> +					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
> +					reg, RK3588_SRAM_INIT_DONE(reg),
> +					0, 500);
> +	if (ret)
> +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);

Can this be made dev_err too, I still see bunch of pr_ and at least here
you have driver context... while at it drop the __func__ from these logs
too please


> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3588_ops = {
> +	.phy_init = rockchip_p3phy_rk3588_init,
> +};
> +
> +static int rochchip_p3phy_init(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> +	if (ret) {
> +		pr_err("failed to enable PCIe bulk clks %d\n", ret);
> +		return ret;
> +	}
> +
> +	reset_control_assert(priv->p30phy);
> +	udelay(1);
> +
> +	if (priv->ops->phy_init) {
> +		ret = priv->ops->phy_init(priv);
> +		if (ret)
> +			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	}
> +
> +	return ret;
> +}
> +
> +static int rochchip_p3phy_exit(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	reset_control_assert(priv->p30phy);
> +	return 0;
> +}
> +
> +static const struct phy_ops rochchip_p3phy_ops = {
> +	.init = rochchip_p3phy_init,
> +	.exit = rochchip_p3phy_exit,
> +	.set_mode = rockchip_p3phy_set_mode,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int rockchip_p3phy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct rockchip_p3phy_priv *priv;
> +	struct device_node *np = dev->of_node;
> +	struct resource *res;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->mmio = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> +	priv->ops = of_device_get_match_data(&pdev->dev);
> +	if (!priv->ops) {
> +		dev_err(&pdev->dev, "no of match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
> +	if (IS_ERR(priv->phy_grf)) {
> +		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
> +		return PTR_ERR(priv->phy_grf);
> +	}
> +
> +	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
> +							 "rockchip,pipe-grf");
> +	if (IS_ERR(priv->pipe_grf))
> +		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
> +
> +	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
> +							     priv->lanes, 2,
> +							     ARRAY_SIZE(priv->lanes));
> +
> +	/* if no data-lanes assume aggregation */
> +	if (priv->num_lanes == -EINVAL) {
> +		dev_dbg(dev, "no data-lanes property found\n");
> +		priv->num_lanes = 1;
> +		priv->lanes[0] = 1;
> +	} else if (priv->num_lanes < 0) {
> +		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
> +		return priv->num_lanes;
> +	}
> +
> +	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
> +	if (IS_ERR(priv->phy)) {
> +		dev_err(dev, "failed to create combphy\n");
> +		return PTR_ERR(priv->phy);
> +	}
> +
> +	priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
> +	if (IS_ERR(priv->p30phy)) {
> +		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
> +				     "failed to get phy reset control\n");
> +	}
> +	if (!priv->p30phy)
> +		dev_info(dev, "no phy reset control specified\n");
> +
> +	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
> +	if (priv->num_clks < 1)
> +		return -ENODEV;
> +
> +	dev_set_drvdata(dev, priv);
> +	phy_set_drvdata(priv->phy, priv);
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id rockchip_p3phy_of_match[] = {
> +	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
> +	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
> +
> +static struct platform_driver rockchip_p3phy_driver = {
> +	.probe	= rockchip_p3phy_probe,
> +	.driver = {
> +		.name = "rockchip-snps-pcie3-phy",
> +		.of_match_table = rockchip_p3phy_of_match,
> +	},
> +};
> +module_platform_driver(rockchip_p3phy_driver);
> +MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
> new file mode 100644
> index 000000000000..93c997f520fe
> --- /dev/null
> +++ b/include/linux/phy/pcie.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.

Header is 2021 !

> + */
> +#ifndef __PHY_PCIE_H
> +#define __PHY_PCIE_H
> +
> +#define PHY_MODE_PCIE_RC 20
> +#define PHY_MODE_PCIE_EP 21
> +#define PHY_MODE_PCIE_BIFURCATION 22
> +
> +#endif
> -- 
> 2.34.1

-- 
~Vinod

Powered by blists - more mailing lists