linux-kernel - Re: [PATCH 3/3] thermal: qcom: tsens: Implement re-initialization workaround quirk

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 15 Jul 2022 16:56:41 +0200
From:   Konrad Dybcio <konrad.dybcio@...ainline.org>
To:     Bhupesh Sharma <bhupesh.sharma@...aro.org>,
        linux-pm@...r.kernel.org
Cc:     bhupesh.linux@...il.com, linux-kernel@...r.kernel.org,
        bjorn.andersson@...aro.org, Amit Kucheria <amitk@...nel.org>,
        Thara Gopinath <thara.gopinath@...il.com>,
        linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH 3/3] thermal: qcom: tsens: Implement re-initialization
 workaround quirk



On 1.07.2022 16:58, Bhupesh Sharma wrote:
> Since for some QCoM tsens controllers, its suggested to
> monitor the controller health periodically and in case an
> issue is detected, to re-initialize the tsens controller
> via trustzone, add the support for the same in the
> qcom tsens driver.
> 
> Note that Once the tsens controller is reset using scm call,
> all SROT and TM region registers will enter the reset mode.
> 
> While all the SROT registers will be re-programmed and
> re-enabled in trustzone prior to the scm call exit, the TM
> region registers will not re-initialized in trustzone and thus
> need to be handled by the tsens driver.
> 
> Cc: Amit Kucheria <amitk@...nel.org>
> Cc: Thara Gopinath <thara.gopinath@...il.com>
> Cc: linux-pm@...r.kernel.org
> Cc: linux-arm-msm@...r.kernel.org
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
> Reported-by: kernel test robot <lkp@...el.com>
> ---
Hi, I think this should be also checked and applied on init. This
seems required for at least SM6375, as the controller starts (or
well, doesn't start...) in an unknown state and the driver does
not like it, as the TSENS_EN indicates it is disabled.
Downstream runs this right at probe..

Konrad