| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220716213742.5g2vmzaz2ywx6jpf@mercury.elektranox.org>
Date: Sat, 16 Jul 2022 23:37:42 +0200
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: ChiaEn Wu <peterwu.pub@...il.com>
Cc: lee.jones@...aro.org, daniel.thompson@...aro.org,
jingoohan1@...il.com, pavel@....cz, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, matthias.bgg@...il.com,
chunfeng.yun@...iatek.com, gregkh@...uxfoundation.org,
jic23@...nel.org, lars@...afoo.de, lgirdwood@...il.com,
broonie@...nel.org, linux@...ck-us.net,
heikki.krogerus@...ux.intel.com, deller@....de,
chiaen_wu@...htek.com, alice_chen@...htek.com,
cy_huang@...htek.com, dri-devel@...ts.freedesktop.org,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-usb@...r.kernel.org,
linux-iio@...r.kernel.org, linux-fbdev@...r.kernel.org,
szunichen@...il.com
Subject: Re: [PATCH v5 10/13] power: supply: mt6370: Add MediaTek MT6370
charger driver
Hi,
On Fri, Jul 15, 2022 at 07:26:04PM +0800, ChiaEn Wu wrote:
> From: ChiaEn Wu <chiaen_wu@...htek.com>
>
> MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
> with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight
> driver, display bias voltage supply, one general purpose LDO, and the
> USB Type-C & PD controller complies with the latest USB Type-C and PD
> standards.
>
> This adds MediaTek MT6370 Charger driver support. The charger module
> of MT6370 supports High-Accuracy Voltage/Current Regulation,
> Average Input Current Regulation, Battery Temperature Sensing,
> Over-Temperature Protection, DPDM Detection for BC1.2.
>
> Signed-off-by: ChiaEn Wu <chiaen_wu@...htek.com>
> ---
Please provide a dump from '/sys/class/power_supply/<charger-name>/uevent'
below the fold in the next revision. I would like to check that you
got the units right in the next submission (in this one they are
definetly not correct).
> v5
> - Replace unsigned int type of pwr_rdy with bool in
> mt6370_chg_set_online()
> - Remove redundant 'else' in mt6370_chg_field_get()
> - Revise 'if-else' in mt6370_chg_field_set()
> - Revise 'if' condition in mt6370_chg_enable_irq()
> - Revise all text 'otg' --> 'OTG'
> - Revise MT6370_MIVR_IBUS_TH_100_MA --> MT6370_MIVR_IBUS_TH_100_mA
> - Revise the description of Kconfig help text
> ---
> drivers/power/supply/Kconfig | 14 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/mt6370-charger.c | 1062 +++++++++++++++++++++++++++++++++
> 3 files changed, 1077 insertions(+)
> create mode 100644 drivers/power/supply/mt6370-charger.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 1aa8323..591deb8 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -619,6 +619,20 @@ config CHARGER_MT6360
> Average Input Current Regulation, Battery Temperature Sensing,
> Over-Temperature Protection, DPDM Detection for BC1.2.
>
> +config CHARGER_MT6370
> + tristate "MediaTek MT6370 Charger Driver"
> + depends on MFD_MT6370
> + depends on REGULATOR
> + select LINEAR_RANGES
> + help
> + Say Y here to enable MT6370 Charger Part.
> + The device supports High-Accuracy Voltage/Current Regulation,
> + Average Input Current Regulation, Battery Temperature Sensing,
> + Over-Temperature Protection, DPDM Detection for BC1.2.
> +
> + This driver can also be built as a module. If so, the module
> + will be called "mt6370-charger".
> +
> config CHARGER_QCOM_SMBB
> tristate "Qualcomm Switch-Mode Battery Charger and Boost"
> depends on MFD_SPMI_PMIC || COMPILE_TEST
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index 7f02f36..8c95276 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -82,6 +82,7 @@ obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
> obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
> obj-$(CONFIG_CHARGER_MP2629) += mp2629_charger.o
> obj-$(CONFIG_CHARGER_MT6360) += mt6360_charger.o
> +obj-$(CONFIG_CHARGER_MT6370) += mt6370-charger.o
> obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o
> obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
> obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
> diff --git a/drivers/power/supply/mt6370-charger.c b/drivers/power/supply/mt6370-charger.c
> new file mode 100644
> index 0000000..76a8c91
> --- /dev/null
> +++ b/drivers/power/supply/mt6370-charger.c
> @@ -0,0 +1,1062 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2022 Richtek Technology Corp.
> + *
> + * Author: ChiaEn Wu <chiaen_wu@...htek.com>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/consumer.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/linear_range.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/workqueue.h>
> +
> +#define MT6370_REG_CHG_CTRL1 0x111
> +#define MT6370_REG_CHG_CTRL2 0x112
> +#define MT6370_REG_CHG_CTRL3 0x113
> +#define MT6370_REG_CHG_CTRL4 0x114
> +#define MT6370_REG_CHG_CTRL5 0x115
> +#define MT6370_REG_CHG_CTRL6 0x116
> +#define MT6370_REG_CHG_CTRL7 0x117
> +#define MT6370_REG_CHG_CTRL8 0x118
> +#define MT6370_REG_CHG_CTRL9 0x119
> +#define MT6370_REG_CHG_CTRL10 0x11A
> +#define MT6370_REG_DEVICE_TYPE 0x122
> +#define MT6370_REG_USB_STATUS1 0x127
> +#define MT6370_REG_CHG_STAT 0x14A
> +#define MT6370_REG_FLED_EN 0x17E
> +#define MT6370_REG_CHG_STAT1 0X1D0
> +#define MT6370_REG_OVPCTRL_STAT 0x1D8
> +
> +#define MT6370_VOBST_MASK GENMASK(7, 2)
> +#define MT6370_OTG_PIN_EN_MASK BIT(1)
> +#define MT6370_OPA_MODE_MASK BIT(0)
> +#define MT6370_OTG_OC_MASK GENMASK(2, 0)
> +
> +#define MT6370_MIVR_IBUS_TH_100_mA 100000
> +#define MT6370_ADC_CHAN_IBUS 5
> +#define MT6370_ADC_CHAN_MAX 9
> +
> +enum mt6370_chg_reg_field {
> + /* MT6370_REG_CHG_CTRL2 */
> + F_IINLMTSEL, F_CFO_EN, F_CHG_EN,
> + /* MT6370_REG_CHG_CTRL3 */
> + F_IAICR, F_AICR_EN, F_ILIM_EN,
> + /* MT6370_REG_CHG_CTRL4 */
> + F_VOREG,
> + /* MT6370_REG_CHG_CTRL6 */
> + F_VMIVR,
> + /* MT6370_REG_CHG_CTRL7 */
> + F_ICHG,
> + /* MT6370_REG_CHG_CTRL8 */
> + F_IPREC,
> + /* MT6370_REG_CHG_CTRL9 */
> + F_IEOC,
> + /* MT6370_REG_DEVICE_TYPE */
> + F_USBCHGEN,
> + /* MT6370_REG_USB_STATUS1 */
> + F_USB_STAT, F_CHGDET,
> + /* MT6370_REG_CHG_STAT */
> + F_CHG_STAT, F_BOOST_STAT, F_VBAT_LVL,
> + /* MT6370_REG_FLED_EN */
> + F_FL_STROBE,
> + /* MT6370_REG_CHG_STAT1 */
> + F_CHG_MIVR_STAT,
> + /* MT6370_REG_OVPCTRL_STAT */
> + F_UVP_D_STAT,
> + F_MAX
> +};
> +
> +struct mt6370_priv {
> + struct device *dev;
> + struct iio_channel *iio_adcs;
> + struct mutex attach_lock;
> + struct power_supply *psy;
> + struct power_supply_desc *psy_desc;
> + struct regmap *regmap;
> + struct regmap_field *rmap_fields[F_MAX];
> + struct regulator_dev *rdev;
> + struct workqueue_struct *wq;
> + struct work_struct bc12_work;
> + struct delayed_work mivr_dwork;
> + int attach;
> + int psy_usb_type;
> + bool pwr_rdy;
> +};
> +
> +enum mt6370_usb_status {
> + MT6370_USB_STAT_NO_VBUS = 0,
> + MT6370_USB_STAT_VBUS_FLOW_IS_UNDER_GOING,
> + MT6370_USB_STAT_SDP,
> + MT6370_USB_STAT_SDP_NSTD,
> + MT6370_USB_STAT_DCP,
> + MT6370_USB_STAT_CDP,
> + MT6370_USB_STAT_MAX
> +};
> +
> +struct mt6370_chg_field {
> + const char *name;
> + const struct linear_range *range;
> + struct reg_field field;
> +};
> +
> +enum {
> + MT6370_RANGE_F_IAICR = 0,
> + MT6370_RANGE_F_VOREG,
> + MT6370_RANGE_F_VMIVR,
> + MT6370_RANGE_F_ICHG,
> + MT6370_RANGE_F_IPREC,
> + MT6370_RANGE_F_IEOC,
> + MT6370_RANGE_F_MAX
> +};
> +
> +#define MT6370_CHG_LINEAR_RANGE(_rfd, _min, _min_sel, _max_sel, _step) \
> +[_rfd] = { \
> + .min = _min, \
> + .min_sel = _min_sel, \
> + .max_sel = _max_sel, \
> + .step = _step, \
> +}
> +
> +/* unit: mA or mV */
> +static const struct linear_range mt6370_chg_ranges[MT6370_RANGE_F_MAX] = {
> + MT6370_CHG_LINEAR_RANGE(MT6370_RANGE_F_IAICR, 100, 0x0, 0x3F, 50),
> + MT6370_CHG_LINEAR_RANGE(MT6370_RANGE_F_VOREG, 3900, 0x0, 0x51, 10),
> + MT6370_CHG_LINEAR_RANGE(MT6370_RANGE_F_VMIVR, 3900, 0x0, 0x5F, 100),
> + MT6370_CHG_LINEAR_RANGE(MT6370_RANGE_F_ICHG, 900, 0x08, 0x31, 100),
> + MT6370_CHG_LINEAR_RANGE(MT6370_RANGE_F_IPREC, 100, 0x0, 0x0F, 50),
> + MT6370_CHG_LINEAR_RANGE(MT6370_RANGE_F_IEOC, 100, 0x0, 0x0F, 50),
> +};
> +
> +#define MT6370_CHG_FIELD(_fd, _reg, _lsb, _msb) \
> +[_fd] = { \
> + .name = #_fd, \
> + .range = NULL, \
> + .field = REG_FIELD(_reg, _lsb, _msb), \
> +}
> +
> +#define MT6370_CHG_FIELD_RANGE(_fd, _reg, _lsb, _msb) \
> +[_fd] = { \
> + .name = #_fd, \
> + .range = &mt6370_chg_ranges[MT6370_RANGE_##_fd], \
> + .field = REG_FIELD(_reg, _lsb, _msb), \
> +}
> +
> +static const struct mt6370_chg_field mt6370_chg_fields[F_MAX] = {
> + MT6370_CHG_FIELD(F_IINLMTSEL, MT6370_REG_CHG_CTRL2, 2, 3),
> + MT6370_CHG_FIELD(F_CFO_EN, MT6370_REG_CHG_CTRL2, 1, 1),
> + MT6370_CHG_FIELD(F_CHG_EN, MT6370_REG_CHG_CTRL2, 0, 0),
> + MT6370_CHG_FIELD_RANGE(F_IAICR, MT6370_REG_CHG_CTRL3, 2, 7),
> + MT6370_CHG_FIELD(F_AICR_EN, MT6370_REG_CHG_CTRL3, 1, 1),
> + MT6370_CHG_FIELD(F_ILIM_EN, MT6370_REG_CHG_CTRL3, 0, 0),
> + MT6370_CHG_FIELD_RANGE(F_VOREG, MT6370_REG_CHG_CTRL4, 1, 7),
> + MT6370_CHG_FIELD_RANGE(F_VMIVR, MT6370_REG_CHG_CTRL6, 1, 7),
> + MT6370_CHG_FIELD_RANGE(F_ICHG, MT6370_REG_CHG_CTRL7, 2, 7),
> + MT6370_CHG_FIELD_RANGE(F_IPREC, MT6370_REG_CHG_CTRL8, 0, 3),
> + MT6370_CHG_FIELD_RANGE(F_IEOC, MT6370_REG_CHG_CTRL9, 4, 7),
> + MT6370_CHG_FIELD(F_USBCHGEN, MT6370_REG_DEVICE_TYPE, 7, 7),
> + MT6370_CHG_FIELD(F_USB_STAT, MT6370_REG_USB_STATUS1, 4, 6),
> + MT6370_CHG_FIELD(F_CHGDET, MT6370_REG_USB_STATUS1, 3, 3),
> + MT6370_CHG_FIELD(F_CHG_STAT, MT6370_REG_CHG_STAT, 6, 7),
> + MT6370_CHG_FIELD(F_BOOST_STAT, MT6370_REG_CHG_STAT, 3, 3),
> + MT6370_CHG_FIELD(F_VBAT_LVL, MT6370_REG_CHG_STAT, 5, 5),
> + MT6370_CHG_FIELD(F_FL_STROBE, MT6370_REG_FLED_EN, 2, 2),
> + MT6370_CHG_FIELD(F_CHG_MIVR_STAT, MT6370_REG_CHG_STAT1, 6, 6),
> + MT6370_CHG_FIELD(F_UVP_D_STAT, MT6370_REG_OVPCTRL_STAT, 4, 4),
> +};
> +
> +static inline int mt6370_chg_field_get(struct mt6370_priv *priv,
> + enum mt6370_chg_reg_field fd,
> + unsigned int *val)
> +{
> + int ret;
> + unsigned int reg_val;
> +
> + ret = regmap_field_read(priv->rmap_fields[fd], ®_val);
> + if (ret < 0)
> + return ret;
> +
> + if (mt6370_chg_fields[fd].range)
> + return linear_range_get_value(mt6370_chg_fields[fd].range,
> + reg_val, val);
> +
> + *val = reg_val;
> + return 0;
> +}
> +
> +static inline int mt6370_chg_field_set(struct mt6370_priv *priv,
> + enum mt6370_chg_reg_field fd,
> + unsigned int val)
> +{
> + int ret;
> + bool f;
> + const struct linear_range *r;
> +
> + if (mt6370_chg_fields[fd].range) {
> + r = mt6370_chg_fields[fd].range;
> +
> + if (fd == F_VMIVR) {
> + ret = linear_range_get_selector_high(r, val, &val, &f);
> + if (!ret)
> + val = r->max_sel;
> + } else {
> + linear_range_get_selector_within(r, val, &val);
> + }
> + }
> +
> + return regmap_field_write(priv->rmap_fields[fd], val);
> +}
> +
> +enum {
> + MT6370_CHG_STAT_READY = 0,
> + MT6370_CHG_STAT_CHARGE_IN_PROGRESS,
> + MT6370_CHG_STAT_DONE,
> + MT6370_CHG_STAT_FAULT,
> + MT6370_CHG_STAT_MAX
> +};
> +
> +enum {
> + MT6370_ATTACH_STAT_DETACH = 0,
> + MT6370_ATTACH_STAT_ATTACH_BC12_NOT_DONE,
> + MT6370_ATTACH_STAT_ATTACH_BC12_DONE,
> + MT6370_ATTACH_STAT_ATTACH_MAX
> +};
> +
> +static int mt6370_chg_otg_of_parse_cb(struct device_node *of,
> + const struct regulator_desc *rdesc,
> + struct regulator_config *rcfg)
> +{
> + struct mt6370_priv *priv = rcfg->driver_data;
> +
> + rcfg->ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(of),
> + "enable", 0, GPIOD_OUT_LOW |
> + GPIOD_FLAGS_BIT_NONEXCLUSIVE,
> + rdesc->name);
> + if (IS_ERR(rcfg->ena_gpiod)) {
> + rcfg->ena_gpiod = NULL;
> + return 0;
> + }
> +
> + return regmap_update_bits(priv->regmap, MT6370_REG_CHG_CTRL1,
> + MT6370_OTG_PIN_EN_MASK,
> + MT6370_OTG_PIN_EN_MASK);
> +}
> +
> +static void mt6370_chg_bc12_work_func(struct work_struct *work)
> +{
> + struct mt6370_priv *priv = container_of(work, struct mt6370_priv,
> + bc12_work);
> + int ret;
> + bool rpt_psy = false;
> + unsigned int attach, usb_stat;
> +
> + mutex_lock(&priv->attach_lock);
> + attach = priv->attach;
> +
> + switch (attach) {
> + case MT6370_ATTACH_STAT_DETACH:
> + usb_stat = 0;
> + break;
> + case MT6370_ATTACH_STAT_ATTACH_BC12_DONE:
> + ret = mt6370_chg_field_get(priv, F_USB_STAT, &usb_stat);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to get USB status\n");
> + goto bc12_work_func_out;
> + }
> + break;
> + case MT6370_ATTACH_STAT_ATTACH_BC12_NOT_DONE:
> + ret = mt6370_chg_field_set(priv, F_USBCHGEN, attach);
> + if (ret < 0)
> + dev_err(priv->dev, "Failed to enable USB CHG EN\n");
> + goto bc12_work_func_out;
> + default:
> + dev_err(priv->dev, "Invalid attach state\n");
> + goto bc12_work_func_out;
> + }
> +
> + rpt_psy = true;
> +
> + switch (usb_stat) {
> + case MT6370_USB_STAT_SDP:
> + priv->psy_desc->type = POWER_SUPPLY_TYPE_USB;
> + priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
> + break;
> + case MT6370_USB_STAT_SDP_NSTD:
> + priv->psy_desc->type = POWER_SUPPLY_TYPE_USB;
> + priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
> + break;
> + case MT6370_USB_STAT_DCP:
> + priv->psy_desc->type = POWER_SUPPLY_TYPE_USB_DCP;
> + priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
> + break;
> + case MT6370_USB_STAT_CDP:
> + priv->psy_desc->type = POWER_SUPPLY_TYPE_USB_CDP;
> + priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
> + break;
> + case MT6370_USB_STAT_NO_VBUS:
> + case MT6370_USB_STAT_VBUS_FLOW_IS_UNDER_GOING:
> + default:
> + priv->psy_desc->type = POWER_SUPPLY_TYPE_USB;
> + priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
> + break;
> + }
Please don't change psy_desc->type. POWER_SUPPLY_TYPE_USB_DCP and
POWER_SUPPLY_TYPE_USB_CDP are deprecated and should not be used
in new code. Just use constant POWER_SUPPLY_TYPE_USB and expose
the details via the 'new' POWER_SUPPLY_PROP_USB_TYPE property
(as you are already doing).
> +bc12_work_func_out:
> + mutex_unlock(&priv->attach_lock);
> +
> + if (rpt_psy)
> + power_supply_changed(priv->psy);
> +}
> +
> +static inline void mt6370_chg_enable_irq(struct mt6370_priv *priv,
> + const char *irq_name, bool en)
> +{
> + int irq_num;
> + struct platform_device *pdev = to_platform_device(priv->dev);
> +
> + irq_num = platform_get_irq_byname(pdev, irq_name);
> + if (irq_num < 0)
> + return;
> +
> + if (en)
> + enable_irq(irq_num);
> + else
> + disable_irq_nosync(irq_num);
> +}
> +
> +static int mt6370_chg_toggle_cfo(struct mt6370_priv *priv)
> +{
> + int ret;
> + unsigned int fl_strobe;
> +
> + /* check if flash led in strobe mode */
> + ret = mt6370_chg_field_get(priv, F_FL_STROBE, &fl_strobe);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to get FL_STROBE_EN\n");
> + return ret;
> + }
> +
> + if (fl_strobe) {
> + dev_err(priv->dev, "Flash led is still in strobe mode\n");
> + return ret;
> + }
> +
> + /* cfo off */
> + ret = mt6370_chg_field_set(priv, F_CFO_EN, 0);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to disable CFO_EN\n");
> + return ret;
> + }
> +
> + /* cfo on */
> + ret = mt6370_chg_field_set(priv, F_CFO_EN, 1);
> + if (ret < 0)
> + dev_err(priv->dev, "Failed to enable CFO_EN\n");
> +
> + return ret;
> +}
> +
> +static int mt6370_chg_read_adc_chan(struct mt6370_priv *priv, unsigned int chan,
> + int *val)
> +{
> + int ret;
> +
> + if (chan >= MT6370_ADC_CHAN_MAX)
> + return -EINVAL;
> +
> + ret = iio_read_channel_processed(&priv->iio_adcs[chan], val);
> + if (ret)
> + dev_err(priv->dev, "Failed to read ADC\n");
> +
> + return ret;
> +}
> +
> +static void mt6370_chg_mivr_dwork_func(struct work_struct *work)
> +{
> + struct mt6370_priv *priv = container_of(work, struct mt6370_priv,
> + mivr_dwork.work);
> + int ret;
> + unsigned int mivr_stat, ibus;
> +
> + ret = mt6370_chg_field_get(priv, F_CHG_MIVR_STAT, &mivr_stat);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to get mivr state\n");
> + goto mivr_handler_out;
> + }
> +
> + if (!mivr_stat)
> + goto mivr_handler_out;
> +
> + ret = mt6370_chg_read_adc_chan(priv, MT6370_ADC_CHAN_IBUS, &ibus);
> + if (ret) {
> + dev_err(priv->dev, "Failed to get ibus\n");
> + goto mivr_handler_out;
> + }
> +
> + if (ibus < MT6370_MIVR_IBUS_TH_100_mA) {
> + ret = mt6370_chg_toggle_cfo(priv);
> + if (ret)
> + dev_err(priv->dev, "Failed to toggle cfo\n");
> + }
> +
> +mivr_handler_out:
> + mt6370_chg_enable_irq(priv, "mivr", true);
> + pm_relax(priv->dev);
> +}
> +
> +static void mt6370_chg_pwr_rdy_check(struct mt6370_priv *priv)
> +{
> + int ret;
> + unsigned int pwr_rdy, otg_en;
> + union power_supply_propval val;
> +
> + /* Check in OTG mode or not */
> + ret = mt6370_chg_field_get(priv, F_BOOST_STAT, &otg_en);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to get OTG state\n");
> + return;
> + }
> +
> + if (otg_en)
> + return;
> +
> + ret = mt6370_chg_field_get(priv, F_UVP_D_STAT, &pwr_rdy);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to get pwr_rdy state reg\n");
> + return;
> + }
> +
> + val.intval = !pwr_rdy;
> +
> + ret = power_supply_set_property(priv->psy, POWER_SUPPLY_PROP_ONLINE,
> + &val);
> + if (ret < 0)
> + dev_err(priv->dev, "Failed to start attach/detach flow\n");
> +}
> +
> +static int mt6370_chg_get_online(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + mutex_lock(&priv->attach_lock);
> + val->intval = !!priv->attach;
> + mutex_unlock(&priv->attach_lock);
> +
> + return 0;
> +}
> +
> +static int mt6370_chg_get_status(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + int ret;
> + unsigned int chg_stat;
> + union power_supply_propval online;
> +
> + ret = power_supply_get_property(priv->psy, POWER_SUPPLY_PROP_ONLINE,
> + &online);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to get online status\n");
> + return ret;
> + }
> +
> + if (!online.intval) {
> + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> + return 0;
> + }
> +
> + ret = mt6370_chg_field_get(priv, F_CHG_STAT, &chg_stat);
> + if (ret < 0)
> + return ret;
> +
> + switch (chg_stat) {
> + case MT6370_CHG_STAT_READY:
> + case MT6370_CHG_STAT_FAULT:
> + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + return ret;
> + case MT6370_CHG_STAT_CHARGE_IN_PROGRESS:
> + val->intval = POWER_SUPPLY_STATUS_CHARGING;
> + return ret;
> + case MT6370_CHG_STAT_DONE:
> + val->intval = POWER_SUPPLY_STATUS_FULL;
> + return ret;
> + default:
> + val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> + return ret;
> + }
> +}
> +
> +static int mt6370_chg_get_charge_type(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + int type, ret;
> + unsigned int chg_stat, vbat_lvl;
> +
> + ret = mt6370_chg_field_get(priv, F_CHG_STAT, &chg_stat);
> + if (ret < 0)
> + return ret;
> +
> + ret = mt6370_chg_field_get(priv, F_VBAT_LVL, &vbat_lvl);
> + if (ret < 0)
> + return ret;
> +
> + switch (chg_stat) {
> + case MT6370_CHG_STAT_CHARGE_IN_PROGRESS:
> + if (vbat_lvl)
> + type = POWER_SUPPLY_CHARGE_TYPE_FAST;
> + else
> + type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> + break;
> + case MT6370_CHG_STAT_READY:
> + case MT6370_CHG_STAT_DONE:
> + case MT6370_CHG_STAT_FAULT:
> + default:
> + type = POWER_SUPPLY_CHARGE_TYPE_NONE;
> + break;
> + }
> +
> + val->intval = type;
> +
> + return 0;
> +}
> +
> +static int mt6370_chg_get_ichg(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + return mt6370_chg_field_get(priv, F_ICHG, &val->intval);
> +}
> +
> +static int mt6370_chg_get_max_ichg(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + val->intval = linear_range_get_max_value(
> + &mt6370_chg_ranges[MT6370_RANGE_F_ICHG]);
> + return 0;
> +}
> +
> +static int mt6370_chg_get_cv(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + return mt6370_chg_field_get(priv, F_VOREG, &val->intval);
> +}
> +
> +static int mt6370_chg_get_max_cv(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + val->intval = linear_range_get_max_value(
> + &mt6370_chg_ranges[MT6370_RANGE_F_VOREG]);
> + return 0;
> +}
> +
> +static int mt6370_chg_get_aicr(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + return mt6370_chg_field_get(priv, F_IAICR, &val->intval);
> +}
> +
> +static int mt6370_chg_get_mivr(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + return mt6370_chg_field_get(priv, F_VMIVR, &val->intval);
> +}
> +
> +static int mt6370_chg_get_iprechg(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + return mt6370_chg_field_get(priv, F_IPREC, &val->intval);
> +}
> +
> +static int mt6370_chg_get_ieoc(struct mt6370_priv *priv,
> + union power_supply_propval *val)
> +{
> + return mt6370_chg_field_get(priv, F_IEOC, &val->intval);
> +}
> +
> +static int mt6370_chg_set_online(struct mt6370_priv *priv,
> + const union power_supply_propval *val)
> +{
> + bool pwr_rdy = !!val->intval;
> +
> + mutex_lock(&priv->attach_lock);
> + if (pwr_rdy == !!priv->attach) {
> + dev_err(priv->dev, "pwr_rdy is same(%d)\n", pwr_rdy);
> + mutex_unlock(&priv->attach_lock);
> + return 0;
> + }
> +
> + priv->attach = pwr_rdy;
> + mutex_unlock(&priv->attach_lock);
> +
> + if (!queue_work(priv->wq, &priv->bc12_work))
> + dev_err(priv->dev, "bc12 work has already queued\n");
> +
> + return 0;
> +}
> +
> +static int mt6370_chg_set_ichg(struct mt6370_priv *priv,
> + const union power_supply_propval *val)
> +{
> + return mt6370_chg_field_set(priv, F_ICHG, val->intval);
> +}
You are directly feeding sysfs value into F_ICHG register,
but the register is in mA accordering to the setup code.
The power-supply ABI is in uA and uV, see
Documentation/ABI/testing/sysfs-class-power
> +static int mt6370_chg_set_cv(struct mt6370_priv *priv,
> + const union power_supply_propval *val)
> +{
> + return mt6370_chg_field_set(priv, F_VOREG, val->intval);
> +}
> +
> +static int mt6370_chg_set_aicr(struct mt6370_priv *priv,
> + const union power_supply_propval *val)
> +{
> + return mt6370_chg_field_set(priv, F_IAICR, val->intval);
> +}
> +
> +static int mt6370_chg_set_mivr(struct mt6370_priv *priv,
> + const union power_supply_propval *val)
> +{
> + return mt6370_chg_field_set(priv, F_VMIVR, val->intval);
> +}
> +
> +static int mt6370_chg_set_iprechg(struct mt6370_priv *priv,
> + const union power_supply_propval *val)
> +{
> + return mt6370_chg_field_set(priv, F_IPREC, val->intval);
> +}
> +
> +static int mt6370_chg_set_ieoc(struct mt6370_priv *priv,
> + const union power_supply_propval *val)
> +{
> + return mt6370_chg_field_set(priv, F_IEOC, val->intval);
> +}
All these one line functions are pretty pointless, you can just
call mt6370_chg_field_set directly.
> +static int mt6370_chg_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct mt6370_priv *priv = power_supply_get_drvdata(psy);
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + return mt6370_chg_get_online(priv, val);
> + case POWER_SUPPLY_PROP_STATUS:
> + return mt6370_chg_get_status(priv, val);
> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> + return mt6370_chg_get_charge_type(priv, val);
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + return mt6370_chg_get_ichg(priv, val);
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + return mt6370_chg_get_max_ichg(priv, val);
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + return mt6370_chg_get_cv(priv, val);
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> + return mt6370_chg_get_max_cv(priv, val);
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + return mt6370_chg_get_aicr(priv, val);
> + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> + return mt6370_chg_get_mivr(priv, val);
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + return mt6370_chg_get_iprechg(priv, val);
> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> + return mt6370_chg_get_ieoc(priv, val);
> + case POWER_SUPPLY_PROP_TYPE:
> + val->intval = priv->psy_desc->type;
> + return 0;
> + case POWER_SUPPLY_PROP_USB_TYPE:
> + val->intval = priv->psy_usb_type;
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int mt6370_chg_set_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + const union power_supply_propval *val)
> +{
> + struct mt6370_priv *priv = power_supply_get_drvdata(psy);
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + return mt6370_chg_set_online(priv, val);
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + return mt6370_chg_set_ichg(priv, val);
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + return mt6370_chg_set_cv(priv, val);
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + return mt6370_chg_set_aicr(priv, val);
> + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> + return mt6370_chg_set_mivr(priv, val);
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + return mt6370_chg_set_iprechg(priv, val);
> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> + return mt6370_chg_set_ieoc(priv, val);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int mt6370_chg_property_is_writeable(struct power_supply *psy,
> + enum power_supply_property psp)
> +{
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> + return 1;
> + default:
> + return 0;
> + }
> +}
> +
> +static enum power_supply_property mt6370_chg_properties[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_CHARGE_TYPE,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
> + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> + POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
> + POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
> + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
> + POWER_SUPPLY_PROP_TYPE,
> + POWER_SUPPLY_PROP_USB_TYPE,
> +};
> +
> +static enum power_supply_usb_type mt6370_chg_usb_types[] = {
> + POWER_SUPPLY_USB_TYPE_UNKNOWN,
> + POWER_SUPPLY_USB_TYPE_SDP,
> + POWER_SUPPLY_USB_TYPE_CDP,
> + POWER_SUPPLY_USB_TYPE_DCP,
> +};
> +
> +static struct power_supply_desc mt6370_chg_psy_desc = {
After fixing the code writing to the .type field use 'static const'.
> + .type = POWER_SUPPLY_TYPE_USB,
> + .properties = mt6370_chg_properties,
> + .num_properties = ARRAY_SIZE(mt6370_chg_properties),
> + .get_property = mt6370_chg_get_property,
> + .set_property = mt6370_chg_set_property,
> + .property_is_writeable = mt6370_chg_property_is_writeable,
> + .usb_types = mt6370_chg_usb_types,
> + .num_usb_types = ARRAY_SIZE(mt6370_chg_usb_types),
> +};
> +
> +static const struct regulator_ops mt6370_chg_otg_ops = {
> + .list_voltage = regulator_list_voltage_linear,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_current_limit = regulator_set_current_limit_regmap,
> + .get_current_limit = regulator_get_current_limit_regmap,
> +};
> +
> +static const u32 mt6370_chg_otg_oc_ma[] = {
> + 500000, 700000, 1100000, 1300000, 1800000, 2100000, 2400000,
> +};
> +
> +static const struct regulator_desc mt6370_chg_otg_rdesc = {
> + .of_match = "usb-otg-vbus-regulator",
> + .of_parse_cb = mt6370_chg_otg_of_parse_cb,
> + .name = "mt6370-usb-otg-vbus",
> + .ops = &mt6370_chg_otg_ops,
> + .owner = THIS_MODULE,
> + .type = REGULATOR_VOLTAGE,
> + .min_uV = 4425000,
> + .uV_step = 25000,
> + .n_voltages = 57,
> + .vsel_reg = MT6370_REG_CHG_CTRL5,
> + .vsel_mask = MT6370_VOBST_MASK,
> + .enable_reg = MT6370_REG_CHG_CTRL1,
> + .enable_mask = MT6370_OPA_MODE_MASK,
> + .curr_table = mt6370_chg_otg_oc_ma,
> + .n_current_limits = ARRAY_SIZE(mt6370_chg_otg_oc_ma),
> + .csel_reg = MT6370_REG_CHG_CTRL10,
> + .csel_mask = MT6370_OTG_OC_MASK,
> +};
> +
> +static int mt6370_chg_init_rmap_fields(struct mt6370_priv *priv)
> +{
> + int i;
> + const struct mt6370_chg_field *fds = mt6370_chg_fields;
> +
> + for (i = 0; i < F_MAX; i++) {
> + priv->rmap_fields[i] = devm_regmap_field_alloc(priv->dev,
> + priv->regmap,
> + fds[i].field);
> + if (IS_ERR(priv->rmap_fields[i]))
> + return dev_err_probe(priv->dev,
> + PTR_ERR(priv->rmap_fields[i]),
> + "Failed to allocate regmapfield[%s]\n",
> + fds[i].name);
> + }
> +
> + return 0;
> +}
> +
> +static int mt6370_chg_init_setting(struct mt6370_priv *priv)
> +{
> + int ret;
> +
> + /* Disable usb_chg_en */
> + ret = mt6370_chg_field_set(priv, F_USBCHGEN, 0);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to disable usb_chg_en\n");
> + return ret;
> + }
> +
> + /* ICHG/IEOC Workaround, ICHG can not be set less than 900mA */
> + ret = mt6370_chg_field_set(priv, F_ICHG, 900);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to set ICHG to 900mA");
> + return ret;
> + }
> +
> + /* Change input current limit selection to using IAICR results */
> + ret = mt6370_chg_field_set(priv, F_IINLMTSEL, 3);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to set IINLMTSEL\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +#define MT6370_CHG_DT_PROP_DECL(_name, _type, _field) \
> +{ \
> + .name = "mediatek,chg-" #_name, \
> + .type = MT6370_PARSE_TYPE_##_type, \
> + .fd = _field, \
> +}
> +
> +static int mt6370_chg_init_otg_regulator(struct mt6370_priv *priv)
> +{
> + struct regulator_config rcfg = {
> + .dev = priv->dev,
> + .regmap = priv->regmap,
> + .driver_data = priv,
> + };
> +
> + priv->rdev = devm_regulator_register(priv->dev, &mt6370_chg_otg_rdesc,
> + &rcfg);
> +
> + return PTR_ERR_OR_ZERO(priv->rdev);
> +}
> +
> +static int mt6370_chg_init_psy(struct mt6370_priv *priv)
> +{
> + struct power_supply_config cfg = {
> + .drv_data = priv,
> + .of_node = dev_of_node(priv->dev),
> + };
> +
> + priv->psy_desc = &mt6370_chg_psy_desc;
> + priv->psy_desc->name = dev_name(priv->dev);
> + priv->psy = devm_power_supply_register(priv->dev, priv->psy_desc, &cfg);
> +
> + return PTR_ERR_OR_ZERO(priv->psy);
> +}
> +
> +static irqreturn_t mt6370_attach_i_handler(int irq, void *data)
> +{
> + struct mt6370_priv *priv = data;
> + unsigned int otg_en;
> + int ret;
> +
> + /* Check in otg mode or not */
> + ret = mt6370_chg_field_get(priv, F_BOOST_STAT, &otg_en);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to get otg state\n");
> + return IRQ_NONE;
> + }
> +
> + if (otg_en)
> + return IRQ_HANDLED;
> +
> + mutex_lock(&priv->attach_lock);
> + priv->attach = MT6370_ATTACH_STAT_ATTACH_BC12_DONE;
> + mutex_unlock(&priv->attach_lock);
> +
> + if (!queue_work(priv->wq, &priv->bc12_work))
> + dev_err(priv->dev, "bc12 work has already queued\n");
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t mt6370_uvp_d_evt_handler(int irq, void *data)
> +{
> + struct mt6370_priv *priv = data;
> +
> + mt6370_chg_pwr_rdy_check(priv);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t mt6370_mivr_handler(int irq, void *data)
> +{
> + struct mt6370_priv *priv = data;
> +
> + pm_stay_awake(priv->dev);
> + mt6370_chg_enable_irq(priv, "mivr", false);
> + schedule_delayed_work(&priv->mivr_dwork, msecs_to_jiffies(200));
> +
> + return IRQ_HANDLED;
> +}
> +
> +#define MT6370_CHG_IRQ(_name) \
> +{ \
> + .name = #_name, \
> + .handler = mt6370_##_name##_handler, \
> +}
> +
> +static int mt6370_chg_init_irq(struct mt6370_priv *priv)
> +{
> + int i, ret;
> + const struct {
> + char *name;
> + irq_handler_t handler;
> + } mt6370_chg_irqs[] = {
> + MT6370_CHG_IRQ(attach_i),
> + MT6370_CHG_IRQ(uvp_d_evt),
> + MT6370_CHG_IRQ(mivr),
> + };
> +
> + for (i = 0; i < ARRAY_SIZE(mt6370_chg_irqs); i++) {
> + ret = platform_get_irq_byname(to_platform_device(priv->dev),
> + mt6370_chg_irqs[i].name);
> + if (ret < 0)
> + return dev_err_probe(priv->dev, ret,
> + "Failed to get irq %s\n",
> + mt6370_chg_irqs[i].name);
> +
> + ret = devm_request_threaded_irq(priv->dev, ret, NULL,
> + mt6370_chg_irqs[i].handler,
> + IRQF_TRIGGER_FALLING,
> + dev_name(priv->dev),
> + priv);
> +
> + if (ret < 0)
> + return dev_err_probe(priv->dev, ret,
> + "Failed to request irq %s\n",
> + mt6370_chg_irqs[i].name);
> + }
> +
> + return 0;
> +}
> +
> +static int mt6370_chg_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct mt6370_priv *priv;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = &pdev->dev;
> +
> + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!priv->regmap)
> + return dev_err_probe(&pdev->dev, -ENODEV,
> + "Failed to get regmap\n");
> +
> + ret = mt6370_chg_init_rmap_fields(priv);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret,
> + "Failed to init regmap fields\n");
> +
> + platform_set_drvdata(pdev, priv);
> +
> + priv->iio_adcs = devm_iio_channel_get_all(priv->dev);
> + if (IS_ERR(priv->iio_adcs))
> + return dev_err_probe(&pdev->dev, PTR_ERR(priv->iio_adcs),
> + "Failed to get iio adc\n");
> +
> + ret = mt6370_chg_init_otg_regulator(priv);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret,
> + "Failed to init otg regulator\n");
> +
> + ret = mt6370_chg_init_psy(priv);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "Failed to init psy\n");
> +
> + mutex_init(&priv->attach_lock);
> + priv->attach = MT6370_ATTACH_STAT_DETACH;
> +
> + priv->wq = create_singlethread_workqueue(dev_name(priv->dev));
> + if (IS_ERR(priv->wq))
> + return dev_err_probe(priv->dev, PTR_ERR(priv->wq),
> + "Failed to create workqueue\n");
> +
> + INIT_WORK(&priv->bc12_work, mt6370_chg_bc12_work_func);
> + INIT_DELAYED_WORK(&priv->mivr_dwork, mt6370_chg_mivr_dwork_func);
> +
> + ret = mt6370_chg_init_setting(priv);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to init mt6370 charger setting\n");
> + goto probe_out;
> + }
> +
> + ret = mt6370_chg_init_irq(priv);
> + if (ret)
> + goto probe_out;
Please don't allocate resource using devm_ infrastructure after
manual allocation. This will use incorrect order during driver
removal (interrupts will be released too late). Either interrupts
need to be managed manually, or you need to use
devm_add_action() for handling of the workqueue/delayed_work/mutex.
> +
> + mt6370_chg_pwr_rdy_check(priv);
> +
> + return 0;
> +
> +probe_out:
> + cancel_delayed_work_sync(&priv->mivr_dwork);
> + flush_workqueue(priv->wq);
> + destroy_workqueue(priv->wq);
> + mutex_destroy(&priv->attach_lock);
> +
> + return ret;
> +}
> +
> +static int mt6370_chg_remove(struct platform_device *pdev)
> +{
> + struct mt6370_priv *priv = platform_get_drvdata(pdev);
> +
> + cancel_delayed_work_sync(&priv->mivr_dwork);
> + flush_workqueue(priv->wq);
> + destroy_workqueue(priv->wq);
> + mutex_destroy(&priv->attach_lock);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mt6370_chg_of_match[] = {
> + { .compatible = "mediatek,mt6370-charger", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, mt6370_chg_of_match);
> +
> +static struct platform_driver mt6370_chg_driver = {
> + .probe = mt6370_chg_probe,
> + .remove = mt6370_chg_remove,
> + .driver = {
> + .name = "mt6370-charger",
> + .of_match_table = mt6370_chg_of_match,
> + },
> +};
> +module_platform_driver(mt6370_chg_driver);
> +
> +MODULE_AUTHOR("ChiaEn Wu <chiaen_wu@...htek.com>");
> +MODULE_DESCRIPTION("MediaTek MT6370 Charger Driver");
> +MODULE_LICENSE("GPL v2");
-- Sebastian
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists