lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220716230802.20788-2-ansuelsmth@gmail.com>
Date:   Sun, 17 Jul 2022 01:07:58 +0200
From:   Christian Marangi <ansuelsmth@...il.com>
To:     Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:     Christian Marangi <ansuelsmth@...il.com>
Subject: [net-next PATCH v3 1/5] net: ethernet: stmicro: stmmac: move queue reset to dedicated functions

Move queue reset to dedicated functions. This aside from a simple
cleanup is also required to allocate a dma conf without resetting the tx
queue while the device is temporarily detached as now the reset is not
part of the dma init function and can be done later in the code flow.

Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 59 ++++++++++---------
 1 file changed, 31 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 6f14b00c0b14..5578abb14949 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -130,6 +130,9 @@ static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id);
 static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id);
 static irqreturn_t stmmac_msi_intr_tx(int irq, void *data);
 static irqreturn_t stmmac_msi_intr_rx(int irq, void *data);
+static void stmmac_reset_rx_queue(struct stmmac_priv *priv, u32 queue);
+static void stmmac_reset_tx_queue(struct stmmac_priv *priv, u32 queue);
+static void stmmac_reset_queues_param(struct stmmac_priv *priv);
 static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue);
 static void stmmac_flush_tx_descriptors(struct stmmac_priv *priv, int queue);
 static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
@@ -1648,9 +1651,6 @@ static int __init_dma_rx_desc_rings(struct stmmac_priv *priv, u32 queue, gfp_t f
 			return -ENOMEM;
 	}
 
-	rx_q->cur_rx = 0;
-	rx_q->dirty_rx = 0;
-
 	/* Setup the chained descriptor addresses */
 	if (priv->mode == STMMAC_CHAIN_MODE) {
 		if (priv->extend_desc)
@@ -1753,12 +1753,6 @@ static int __init_dma_tx_desc_rings(struct stmmac_priv *priv, u32 queue)
 		tx_q->tx_skbuff[i] = NULL;
 	}
 
-	tx_q->dirty_tx = 0;
-	tx_q->cur_tx = 0;
-	tx_q->mss = 0;
-
-	netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, queue));
-
 	return 0;
 }
 
@@ -2644,10 +2638,7 @@ static void stmmac_tx_err(struct stmmac_priv *priv, u32 chan)
 	stmmac_stop_tx_dma(priv, chan);
 	dma_free_tx_skbufs(priv, chan);
 	stmmac_clear_tx_descriptors(priv, chan);
-	tx_q->dirty_tx = 0;
-	tx_q->cur_tx = 0;
-	tx_q->mss = 0;
-	netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, chan));
+	stmmac_reset_tx_queue(priv, chan);
 	stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
 			    tx_q->dma_tx_phy, chan);
 	stmmac_start_tx_dma(priv, chan);
@@ -3706,6 +3697,8 @@ static int stmmac_open(struct net_device *dev)
 		goto init_error;
 	}
 
+	stmmac_reset_queues_param(priv);
+
 	ret = stmmac_hw_setup(dev, true);
 	if (ret < 0) {
 		netdev_err(priv->dev, "%s: Hw setup failed\n", __func__);
@@ -6332,6 +6325,7 @@ void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue)
 		return;
 	}
 
+	stmmac_reset_rx_queue(priv, queue);
 	stmmac_clear_rx_descriptors(priv, queue);
 
 	stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
@@ -6393,6 +6387,7 @@ void stmmac_enable_tx_queue(struct stmmac_priv *priv, u32 queue)
 		return;
 	}
 
+	stmmac_reset_tx_queue(priv, queue);
 	stmmac_clear_tx_descriptors(priv, queue);
 
 	stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
@@ -7319,6 +7314,25 @@ int stmmac_suspend(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(stmmac_suspend);
 
+static void stmmac_reset_rx_queue(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+
+	rx_q->cur_rx = 0;
+	rx_q->dirty_rx = 0;
+}
+
+static void stmmac_reset_tx_queue(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+
+	tx_q->cur_tx = 0;
+	tx_q->dirty_tx = 0;
+	tx_q->mss = 0;
+
+	netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, queue));
+}
+
 /**
  * stmmac_reset_queues_param - reset queue parameters
  * @priv: device pointer
@@ -7329,22 +7343,11 @@ static void stmmac_reset_queues_param(struct stmmac_priv *priv)
 	u32 tx_cnt = priv->plat->tx_queues_to_use;
 	u32 queue;
 
-	for (queue = 0; queue < rx_cnt; queue++) {
-		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-
-		rx_q->cur_rx = 0;
-		rx_q->dirty_rx = 0;
-	}
-
-	for (queue = 0; queue < tx_cnt; queue++) {
-		struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	for (queue = 0; queue < rx_cnt; queue++)
+		stmmac_reset_rx_queue(priv, queue);
 
-		tx_q->cur_tx = 0;
-		tx_q->dirty_tx = 0;
-		tx_q->mss = 0;
-
-		netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, queue));
-	}
+	for (queue = 0; queue < tx_cnt; queue++)
+		stmmac_reset_tx_queue(priv, queue);
 }
 
 /**
-- 
2.36.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ