lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220719153344.621750-1-amelie.delaunay@foss.st.com>
Date:   Tue, 19 Jul 2022 17:33:43 +0200
From:   Amelie Delaunay <amelie.delaunay@...s.st.com>
To:     Jonathan Corbet <corbet@....net>, Vinod Koul <vkoul@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>
CC:     <linux-doc@...r.kernel.org>, <dmaengine@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, Marek Vasut <marex@...x.de>,
        Amelie Delaunay <amelie.delaunay@...s.st.com>
Subject: [PATCH v3 5/6] dmaengine: stm32-dma: add support to trigger STM32 MDMA

STM32 MDMA can be triggered by STM32 DMA channels transfer complete.
The "request line number" triggering STM32 MDMA is the STM32 DMAMUX channel
id set by stm32-dmamux driver in dma_spec->args[3].

stm32-dma driver fills the struct stm32_dma_mdma_config used to configure
the MDMA with struct dma_slave_config .peripheral_config/.peripheral_size.

Signed-off-by: Amelie Delaunay <amelie.delaunay@...s.st.com>
---
Changes in v3:
- fix warning: expecting prototype for struct stm32_dma_mdma_cfg.
  Prototype was for struct stm32_dma_mdma_config instead.

No changes in v2.
---
 drivers/dma/stm32-dma.c | 47 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 6aa281561f38..4891a1767e5a 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -140,6 +140,7 @@
 #define STM32_DMA_THRESHOLD_FTR_MASK	GENMASK(1, 0)
 #define STM32_DMA_DIRECT_MODE_MASK	BIT(2)
 #define STM32_DMA_ALT_ACK_MODE_MASK	BIT(4)
+#define STM32_DMA_MDMA_STREAM_ID_MASK	GENMASK(19, 16)
 
 enum stm32_dma_width {
 	STM32_DMA_BYTE,
@@ -193,6 +194,19 @@ struct stm32_dma_desc {
 	struct stm32_dma_sg_req sg_req[];
 };
 
+/**
+ * struct stm32_dma_mdma_config - STM32 DMA MDMA configuration
+ * @stream_id: DMA request to trigger STM32 MDMA transfer
+ * @ifcr: DMA interrupt flag clear register address,
+ *        used by STM32 MDMA to clear DMA Transfer Complete flag
+ * @tcf: DMA Transfer Complete flag
+ */
+struct stm32_dma_mdma_config {
+	u32 stream_id;
+	u32 ifcr;
+	u32 tcf;
+};
+
 struct stm32_dma_chan {
 	struct virt_dma_chan vchan;
 	bool config_init;
@@ -207,6 +221,8 @@ struct stm32_dma_chan {
 	u32 mem_burst;
 	u32 mem_width;
 	enum dma_status status;
+	bool trig_mdma;
+	struct stm32_dma_mdma_config mdma_config;
 };
 
 struct stm32_dma_device {
@@ -386,6 +402,13 @@ static int stm32_dma_slave_config(struct dma_chan *c,
 
 	memcpy(&chan->dma_sconfig, config, sizeof(*config));
 
+	/* Check if user is requesting DMA to trigger STM32 MDMA */
+	if (config->peripheral_size) {
+		config->peripheral_config = &chan->mdma_config;
+		config->peripheral_size = sizeof(chan->mdma_config);
+		chan->trig_mdma = true;
+	}
+
 	chan->config_init = true;
 
 	return 0;
@@ -561,6 +584,10 @@ static void stm32_dma_start_transfer(struct stm32_dma_chan *chan)
 	sg_req = &chan->desc->sg_req[chan->next_sg];
 	reg = &sg_req->chan_reg;
 
+	/* When DMA triggers STM32 MDMA, DMA Transfer Complete is managed by STM32 MDMA */
+	if (chan->trig_mdma && chan->dma_sconfig.direction != DMA_MEM_TO_DEV)
+		reg->dma_scr &= ~STM32_DMA_SCR_TCIE;
+
 	reg->dma_scr &= ~STM32_DMA_SCR_EN;
 	stm32_dma_write(dmadev, STM32_DMA_SCR(chan->id), reg->dma_scr);
 	stm32_dma_write(dmadev, STM32_DMA_SPAR(chan->id), reg->dma_spar);
@@ -710,6 +737,8 @@ static void stm32_dma_handle_chan_done(struct stm32_dma_chan *chan, u32 scr)
 
 	if (chan->desc->cyclic) {
 		vchan_cyclic_callback(&chan->desc->vdesc);
+		if (chan->trig_mdma)
+			return;
 		stm32_dma_sg_inc(chan);
 		/* cyclic while CIRC/DBM disable => post resume reconfiguration needed */
 		if (!(scr & (STM32_DMA_SCR_CIRC | STM32_DMA_SCR_DBM)))
@@ -1085,6 +1114,10 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_slave_sg(
 	else
 		chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_PFCTRL;
 
+	/* Activate Double Buffer Mode if DMA triggers STM32 MDMA and more than 1 sg */
+	if (chan->trig_mdma && sg_len > 1)
+		chan->chan_reg.dma_scr |= STM32_DMA_SCR_DBM;
+
 	for_each_sg(sgl, sg, sg_len, i) {
 		ret = stm32_dma_set_xfer_param(chan, direction, &buswidth,
 					       sg_dma_len(sg),
@@ -1106,6 +1139,8 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_slave_sg(
 		desc->sg_req[i].chan_reg.dma_spar = chan->chan_reg.dma_spar;
 		desc->sg_req[i].chan_reg.dma_sm0ar = sg_dma_address(sg);
 		desc->sg_req[i].chan_reg.dma_sm1ar = sg_dma_address(sg);
+		if (chan->trig_mdma)
+			desc->sg_req[i].chan_reg.dma_sm1ar += sg_dma_len(sg);
 		desc->sg_req[i].chan_reg.dma_sndtr = nb_data_items;
 	}
 
@@ -1193,8 +1228,11 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_cyclic(
 		desc->sg_req[i].chan_reg.dma_spar = chan->chan_reg.dma_spar;
 		desc->sg_req[i].chan_reg.dma_sm0ar = buf_addr;
 		desc->sg_req[i].chan_reg.dma_sm1ar = buf_addr;
+		if (chan->trig_mdma)
+			desc->sg_req[i].chan_reg.dma_sm1ar += period_len;
 		desc->sg_req[i].chan_reg.dma_sndtr = nb_data_items;
-		buf_addr += period_len;
+		if (!chan->trig_mdma)
+			buf_addr += period_len;
 	}
 
 	desc->num_sgs = num_periods;
@@ -1476,6 +1514,7 @@ static void stm32_dma_set_config(struct stm32_dma_chan *chan,
 		chan->threshold = STM32_DMA_FIFO_THRESHOLD_NONE;
 	if (FIELD_GET(STM32_DMA_ALT_ACK_MODE_MASK, cfg->features))
 		chan->chan_reg.dma_scr |= STM32_DMA_SCR_TRBUFF;
+	chan->mdma_config.stream_id = FIELD_GET(STM32_DMA_MDMA_STREAM_ID_MASK, cfg->features);
 }
 
 static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
@@ -1615,6 +1654,12 @@ static int stm32_dma_probe(struct platform_device *pdev)
 		chan->id = i;
 		chan->vchan.desc_free = stm32_dma_desc_free;
 		vchan_init(&chan->vchan, dd);
+
+		chan->mdma_config.ifcr = res->start;
+		chan->mdma_config.ifcr += STM32_DMA_IFCR(chan->id);
+
+		chan->mdma_config.tcf = STM32_DMA_TCI;
+		chan->mdma_config.tcf <<= STM32_DMA_FLAGS_SHIFT(chan->id);
 	}
 
 	ret = dma_async_device_register(dd);
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ