linux-kernel - Re: [PATCH v5 1/6] dt-bindings: remoteproc: Add PRU consumer bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220719161746.GC3393732@p14s>
Date:   Tue, 19 Jul 2022 10:17:46 -0600
From:   Mathieu Poirier <mathieu.poirier@...aro.org>
To:     Puranjay Mohan <p-mohan@...com>
Cc:     linux-kernel@...r.kernel.org, bjorn.andersson@...aro.org,
        krzysztof.kozlowski+dt@...aro.org,
        linux-remoteproc@...r.kernel.org, devicetree@...r.kernel.org,
        nm@...com, ssantosh@...nel.org, s-anna@...com,
        linux-arm-kernel@...ts.infradead.org, rogerq@...nel.org,
        grygorii.strashko@...com, vigneshr@...com, kishon@...com,
        robh@...nel.org
Subject: Re: [PATCH v5 1/6] dt-bindings: remoteproc: Add PRU consumer bindings

On Tue, Jun 07, 2022 at 10:26:45AM +0530, Puranjay Mohan wrote:
> From: Suman Anna <s-anna@...com>
> 
> Add a YAML binding document for PRU consumers. The binding includes
> all the common properties that can be used by different PRU consumer
> or application nodes and supported by the PRU remoteproc driver.
> These are used to configure the PRU hardware for specific user
> applications.
> 
> The application nodes themselves should define their own bindings.
> 
> Co-developed-by: Tero Kristo <t-kristo@...com>
> Signed-off-by: Tero Kristo <t-kristo@...com>
> Signed-off-by: Suman Anna <s-anna@...com>
> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
> Signed-off-by: Puranjay Mohan <p-mohan@...com>
> Reviewed-by: Rob Herring <robh@...nel.org>
> ---
> V3->V4:
> * Addressed Rob's comments regarding max and min Items.
> * removed the dependencies tag as it was redundant.
> ---
>  .../bindings/remoteproc/ti,pru-consumer.yaml  | 69 +++++++++++++++++++
>  1 file changed, 69 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
> new file mode 100644
> index 000000000000..df384b44259b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common TI PRU Consumer Binding
> +
> +maintainers:
> +  - Suman Anna <s-anna@...com>
> +
> +description: |
> +  A PRU application/consumer/user node typically uses one or more PRU device
> +  nodes to implement a PRU application/functionality. Each application/client
> +  node would need a reference to at least a PRU node, and optionally define
> +  some properties needed for hardware/firmware configuration. The below
> +  properties are a list of common properties supported by the PRU remoteproc
> +  infrastructure.
> +
> +  The application nodes shall define their own bindings like regular platform
> +  devices, so below are in addition to each node's bindings.
> +
> +properties:
> +  ti,prus:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: phandles to the PRU, RTU or Tx_PRU nodes used
> +    minItems: 1
> +    maxItems: 6
> +    items:
> +      maxItems: 1
> +
> +  firmware-name:
> +    $ref: /schemas/types.yaml#/definitions/string-array
> +    minItems: 1
> +    maxItems: 6
> +    description: |
> +      firmwares for the PRU cores, the default firmware for the core from
> +      the PRU node will be used if not provided. The firmware names should
> +      correspond to the PRU cores listed in the 'ti,prus' property
> +
> +  ti,pruss-gp-mux-sel:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 6
> +    items:
> +      enum: [0, 1, 2, 3, 4]
> +    description: |
> +      array of values for the GP_MUX_SEL under PRUSS_GPCFG register for a PRU.
> +      This selects the internal muxing scheme for the PRU instance. Values
> +      should correspond to the PRU cores listed in the 'ti,prus' property. The
> +      GP_MUX_SEL setting is a per-slice setting (one setting for PRU0, RTU0,
> +      and Tx_PRU0 on K3 SoCs). Use the same value for all cores within the
> +      same slice in the associative array. If the array size is smaller than
> +      the size of 'ti,prus' property, the default out-of-reset value (0) for the
> +      PRU core is used.
> +
> +required:
> +  - ti,prus
> +
> +additionalProperties: true
> +
> +examples:
> +  - |
> +    /* PRU application node example */
> +    pru-app {
> +        ti,prus = <&pru0>, <&pru1>;
> +        firmware-name = "pruss-app-fw0", "pruss-app-fw1";
> +        ti,pruss-gp-mux-sel = <2>, <1>;
> +    };

It would be nice to have a full example in order to provide more context.

I am done reviewing this set.

Thanks,
Mathieu

> -- 
> 2.17.1
>