linux-kernel - Re: [PATCH 1/8] dt-bindings: display: ti,am65x-dss: Add port properties for DSS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220720232845.GA4164694-robh@kernel.org>
Date:   Wed, 20 Jul 2022 17:28:45 -0600
From:   Rob Herring <robh@...nel.org>
To:     Aradhya Bhatia <a-bhatia1@...com>
Cc:     Tomi Valkeinen <tomba@...nel.org>, Jyri Sarha <jyri.sarha@....fi>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Darren Etheridge <detheridge@...com>,
        Nishanth Menon <nm@...com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Rahul T R <r-ravikumar@...com>,
        Krunal Bhargav <k-bhargav@...com>,
        Devarsh Thakkar <devarsht@...com>,
        DRI Development List <dri-devel@...ts.freedesktop.org>,
        Devicetree List <devicetree@...r.kernel.org>,
        Linux Kernel List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/8] dt-bindings: display: ti,am65x-dss: Add port
 properties for DSS

On Tue, Jul 19, 2022 at 01:38:38PM +0530, Aradhya Bhatia wrote:
> Add "ti,oldi-mode" property to indicate the tidss driver the OLDI output
> mode. The 2 OLDI TXes on am625-dss allow a 3 different types of panel
> connections with the board.
> 
> 1. Single Link / Single Mode on OLDI TX 0 OR 1.
> 2. Single Link / Duplicate Mode on OLDI TX 0 and 1.
> 3. Dual Link / Single Mode on OLDI TX 0 and 1.
> 
> Add "ti,rgb565-to-888" property to override 16bit output from a videoport
> for a bridge that only accepts 24bit RGB888 DPI input.
> 
> On some boards the HDMI bridge takes a 24bit DPI input, but only 16 data
> pins are actually enabled from the SoC.  This new property forces the
> output to be RGB565 on a specific video port if the bridge requests a
> 24bit RGB color space.
> 
> This assumes that the video port is connected like so:
> 
> SoC : Bridge
> R0 ->   R3
> R1 ->   R4
> R2 ->   R5
> R3 ->   R6
> R4 ->   R7
> G0 ->   G2
> G1 ->   G3
> G2 ->   G4
> G3 ->   G5
> G4 ->   G6
> G5 ->   G7
> B0 ->   B3
> B1 ->   B4
> B2 ->   B5
> B3 ->   B6
> B4 ->   B7
> 
> On the bridge side R0->R2, G0->G1, B0->B2 would be tied to ground.
> The bridge sees 24bits of data,  but the lsb's are always zero.

Unless the bridge ignores the LSBs, that's not the right way to do 16 to 
24 bit. The LSBs should be connected to the MSB of the color component 
to get full color range.

> 
> Signed-off-by: Aradhya Bhatia <a-bhatia1@...com>
> ---
>  .../bindings/display/ti/ti,am65x-dss.yaml     | 25 +++++++++++++++++--
>  1 file changed, 23 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> index 6bbce921479d..11d9b3821409 100644
> --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> @@ -80,15 +80,35 @@ properties:
>  
>      properties:
>        port@0:
> -        $ref: /schemas/graph.yaml#/properties/port
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
>          description:
>            The DSS OLDI output port node form video port 1
>  
> +        properties:
> +          ti,oldi-mode:
> +            description: TI specific property to indicate the mode the OLDI TXes
> +              and the display panel are connected in.
> +              0 -> OLDI TXes OFF (driver default for am625-dss)
> +              1 -> Single link, Single Mode (OLDI0) (driver default for am65x-dss)
> +              2 -> Single link, Single Mode (OLDI1)
> +              3 -> Single link, Duplicate Mode
> +              4 -> Dual link (Only Single Mode)
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            enum: [0, 1, 2, 3, 4]

Wouldn't 'data-lanes' property work for this purpose.

Generally, we don't put properties in port nodes.

> +
>        port@1:
> -        $ref: /schemas/graph.yaml#/properties/port
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
>          description:
>            The DSS DPI output port node from video port 2
>  
> +        properties:
> +          ti,rgb565-to-888:
> +            description:
> +              property to override DPI output to 16bit for 24bit bridge
> +            type: boolean

There's work underway for standard way to handle interface formats[1]. 
Please help/comment on that to make sure it works for you. 

Rob

[1] https://lore.kernel.org/all/20220628181838.2031-3-max.oss.09@gmail.com/