[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1658315023-3336-6-git-send-email-quic_c_skakit@quicinc.com>
Date: Wed, 20 Jul 2022 16:33:43 +0530
From: Satya Priya <quic_c_skakit@...cinc.com>
To: Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>
CC: <linux-arm-msm@...r.kernel.org>, <linux-soc@...r.kernel.org>,
<linux-clk@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, <robh@...nel.org>,
<robh+dt@...nel.org>, <quic_tdas@...cinc.com>,
<quic_c_skakit@...cinc.com>
Subject: [PATCH V6 5/5] clk: qcom: lpass: Add support for resets & external mclk for SC7280
From: Taniya Das <quic_tdas@...cinc.com>
The clock gating control for TX/RX/WSA core bus clocks would be required
to be reset(moved from hardware control) from audio core driver. Thus
add the support for the reset clocks.
Also add the external mclk to interface external MI2S.
Fixes: a9dd26639d05 ("clk: qcom: lpass: Add support for LPASS clock controller for SC7280").
Signed-off-by: Taniya Das <quic_tdas@...cinc.com>
---
drivers/clk/qcom/lpassaudiocc-sc7280.c | 22 +++++++++++++++++++++-
drivers/clk/qcom/lpasscorecc-sc7280.c | 33 +++++++++++++++++++++++++++++++++
2 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/lpassaudiocc-sc7280.c b/drivers/clk/qcom/lpassaudiocc-sc7280.c
index 6067328..063e036 100644
--- a/drivers/clk/qcom/lpassaudiocc-sc7280.c
+++ b/drivers/clk/qcom/lpassaudiocc-sc7280.c
@@ -23,6 +23,7 @@
#include "clk-regmap-mux.h"
#include "common.h"
#include "gdsc.h"
+#include "reset.h"
enum {
P_BI_TCXO,
@@ -248,7 +249,7 @@ static struct clk_rcg2 lpass_aon_cc_main_rcg_clk_src = {
.parent_data = lpass_aon_cc_parent_data_0,
.num_parents = ARRAY_SIZE(lpass_aon_cc_parent_data_0),
.flags = CLK_OPS_PARENT_ENABLE,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_rcg2_shared_ops,
},
};
@@ -703,6 +704,18 @@ static const struct qcom_cc_desc lpass_audio_cc_sc7280_desc = {
.num_clks = ARRAY_SIZE(lpass_audio_cc_sc7280_clocks),
};
+static const struct qcom_reset_map lpass_audio_cc_sc7280_resets[] = {
+ [LPASS_AUDIO_SWR_RX_CGCR] = { 0xa0, 1 },
+ [LPASS_AUDIO_SWR_TX_CGCR] = { 0xa8, 1 },
+ [LPASS_AUDIO_SWR_WSA_CGCR] = { 0xb0, 1 },
+};
+
+static const struct qcom_cc_desc lpass_audio_cc_reset_sc7280_desc = {
+ .config = &lpass_audio_cc_sc7280_regmap_config,
+ .resets = lpass_audio_cc_sc7280_resets,
+ .num_resets = ARRAY_SIZE(lpass_audio_cc_sc7280_resets),
+};
+
static const struct of_device_id lpass_audio_cc_sc7280_match_table[] = {
{ .compatible = "qcom,sc7280-lpassaudiocc" },
{ }
@@ -779,6 +792,13 @@ static int lpass_audio_cc_sc7280_probe(struct platform_device *pdev)
return ret;
}
+ ret = qcom_cc_probe_by_index(pdev, 1, &lpass_audio_cc_reset_sc7280_desc);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register LPASS AUDIO CC Resets\n");
+ pm_runtime_disable(&pdev->dev);
+ return ret;
+ }
+
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
diff --git a/drivers/clk/qcom/lpasscorecc-sc7280.c b/drivers/clk/qcom/lpasscorecc-sc7280.c
index 1f1f1bd..6ad19b0 100644
--- a/drivers/clk/qcom/lpasscorecc-sc7280.c
+++ b/drivers/clk/qcom/lpasscorecc-sc7280.c
@@ -190,6 +190,19 @@ static struct clk_rcg2 lpass_core_cc_ext_if1_clk_src = {
},
};
+static struct clk_rcg2 lpass_core_cc_ext_mclk0_clk_src = {
+ .cmd_rcgr = 0x20000,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = lpass_core_cc_parent_map_0,
+ .freq_tbl = ftbl_lpass_core_cc_ext_if0_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "lpass_core_cc_ext_mclk0_clk_src",
+ .parent_data = lpass_core_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(lpass_core_cc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
static struct clk_branch lpass_core_cc_core_clk = {
.halt_reg = 0x1f000,
@@ -283,6 +296,24 @@ static struct clk_branch lpass_core_cc_lpm_mem0_core_clk = {
},
};
+static struct clk_branch lpass_core_cc_ext_mclk0_clk = {
+ .halt_reg = 0x20014,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x20014,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "lpass_core_cc_ext_mclk0_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &lpass_core_cc_ext_mclk0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch lpass_core_cc_sysnoc_mport_core_clk = {
.halt_reg = 0x23000,
.halt_check = BRANCH_HALT_VOTED,
@@ -326,6 +357,8 @@ static struct clk_regmap *lpass_core_cc_sc7280_clocks[] = {
[LPASS_CORE_CC_LPM_CORE_CLK] = &lpass_core_cc_lpm_core_clk.clkr,
[LPASS_CORE_CC_LPM_MEM0_CORE_CLK] = &lpass_core_cc_lpm_mem0_core_clk.clkr,
[LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK] = &lpass_core_cc_sysnoc_mport_core_clk.clkr,
+ [LPASS_CORE_CC_EXT_MCLK0_CLK] = &lpass_core_cc_ext_mclk0_clk.clkr,
+ [LPASS_CORE_CC_EXT_MCLK0_CLK_SRC] = &lpass_core_cc_ext_mclk0_clk_src.clkr,
};
static struct regmap_config lpass_core_cc_sc7280_regmap_config = {
--
2.7.4
Powered by blists - more mailing lists