[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220721185608.GA1743293@bhelgaas>
Date: Thu, 21 Jul 2022 13:56:08 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: William Zhang <william.zhang@...adcom.com>
Cc: Linux ARM List <linux-arm-kernel@...ts.infradead.org>,
joel.peshkin@...adcom.com, dan.beygelman@...adcom.com,
Miquel Raynal <miquel.raynal@...tlin.com>,
"David S. Miller" <davem@...emloft.net>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Kishon Vijay Abraham I <kishon@...com>,
Vinod Koul <vkoul@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Florian Fainelli <f.fainelli@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Rafał Miłecki <rafal@...ecki.pl>,
"open list:I2C SUBSYSTEM HOST DRIVERS" <linux-i2c@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:MEMORY TECHNOLOGY DEVICES (MTD)"
<linux-mtd@...ts.infradead.org>,
"open list:NETWORKING DRIVERS" <netdev@...r.kernel.org>,
"open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS"
<linux-pci@...r.kernel.org>,
"open list:GENERIC PHY FRAMEWORK" <linux-phy@...ts.infradead.org>,
"open list:PIN CONTROL SUBSYSTEM" <linux-gpio@...r.kernel.org>,
"open list:BROADCOM BMIPS MIPS ARCHITECTURE"
<linux-mips@...r.kernel.org>,
"open list:SERIAL DRIVERS" <linux-serial@...r.kernel.org>,
"open list:WATCHDOG DEVICE DRIVERS" <linux-watchdog@...r.kernel.org>
Subject: Re: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on
ARCH_BCMBCA
On Wed, Jul 20, 2022 at 05:07:40PM -0700, William Zhang wrote:
> Replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
>
> Signed-off-by: William Zhang <william.zhang@...adcom.com>
Acked-by: Bjorn Helgaas <bhelgaas@...gle.com> # drivers/pci
+1 on "why" vs "what" in the commit log.
> ---
>
> drivers/i2c/busses/Kconfig | 4 ++--
> drivers/mtd/parsers/Kconfig | 6 +++---
> drivers/net/ethernet/broadcom/Kconfig | 4 ++--
> drivers/pci/controller/Kconfig | 2 +-
> drivers/phy/broadcom/Kconfig | 4 ++--
> drivers/pinctrl/bcm/Kconfig | 4 ++--
> drivers/reset/Kconfig | 2 +-
> drivers/soc/bcm/bcm63xx/Kconfig | 4 ++--
> drivers/tty/serial/Kconfig | 4 ++--
> drivers/watchdog/Kconfig | 2 +-
> 10 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 45a4e9f1b639..fd9a4dd01997 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -487,8 +487,8 @@ config I2C_BCM_KONA
>
> config I2C_BRCMSTB
> tristate "BRCM Settop/DSL I2C controller"
> - depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
> - ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
> + depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
> + BMIPS_GENERIC || COMPILE_TEST
> default y
> help
> If you say yes to this option, support will be included for the
> diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
> index b43df73927a0..d6db655a1d24 100644
> --- a/drivers/mtd/parsers/Kconfig
> +++ b/drivers/mtd/parsers/Kconfig
> @@ -69,8 +69,8 @@ config MTD_OF_PARTS
>
> config MTD_OF_PARTS_BCM4908
> bool "BCM4908 partitioning support"
> - depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
> - default ARCH_BCM4908
> + depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
> + default ARCH_BCMBCA
> help
> This provides partitions parser for BCM4908 family devices
> that can have multiple "firmware" partitions. It takes care of
> @@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
>
> config MTD_OF_PARTS_LINKSYS_NS
> bool "Linksys Northstar partitioning support"
> - depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
> + depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
> default ARCH_BCM_5301X
> help
> This provides partitions parser for Linksys devices based on Broadcom
> diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
> index 56e0fb07aec7..f4e1ca68d831 100644
> --- a/drivers/net/ethernet/broadcom/Kconfig
> +++ b/drivers/net/ethernet/broadcom/Kconfig
> @@ -53,8 +53,8 @@ config B44_PCI
>
> config BCM4908_ENET
> tristate "Broadcom BCM4908 internal mac support"
> - depends on ARCH_BCM4908 || COMPILE_TEST
> - default y if ARCH_BCM4908
> + depends on ARCH_BCMBCA || COMPILE_TEST
> + default y if ARCH_BCMBCA
> help
> This driver supports Ethernet controller integrated into Broadcom
> BCM4908 family SoCs.
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index d1c5fcf00a8a..bfd9bac37e24 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -274,7 +274,7 @@ config VMD
>
> config PCIE_BRCMSTB
> tristate "Broadcom Brcmstb PCIe host controller"
> - depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
> + depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
> BMIPS_GENERIC || COMPILE_TEST
> depends on OF
> depends on PCI_MSI_IRQ_DOMAIN
> diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
> index 93a6a8ee4716..1d89a2fd9b79 100644
> --- a/drivers/phy/broadcom/Kconfig
> +++ b/drivers/phy/broadcom/Kconfig
> @@ -93,11 +93,11 @@ config PHY_BRCM_SATA
>
> config PHY_BRCM_USB
> tristate "Broadcom STB USB PHY driver"
> - depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
> + depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
> depends on OF
> select GENERIC_PHY
> select SOC_BRCMSTB if ARCH_BRCMSTB
> - default ARCH_BCM4908 || ARCH_BRCMSTB
> + default ARCH_BCMBCA || ARCH_BRCMSTB
> help
> Enable this to support the Broadcom STB USB PHY.
> This driver is required by the USB XHCI, EHCI and OHCI
> diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
> index 8f4d89806fcb..35b51ce4298e 100644
> --- a/drivers/pinctrl/bcm/Kconfig
> +++ b/drivers/pinctrl/bcm/Kconfig
> @@ -31,13 +31,13 @@ config PINCTRL_BCM2835
>
> config PINCTRL_BCM4908
> tristate "Broadcom BCM4908 pinmux driver"
> - depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
> + depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
> select PINMUX
> select PINCONF
> select GENERIC_PINCONF
> select GENERIC_PINCTRL_GROUPS
> select GENERIC_PINMUX_FUNCTIONS
> - default ARCH_BCM4908
> + default ARCH_BCMBCA
> help
> Driver for BCM4908 family SoCs with integrated pin controller.
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index f9a7cee01659..7ae71535fe2a 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -201,7 +201,7 @@ config RESET_SCMI
>
> config RESET_SIMPLE
> bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
> - default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
> + default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
> help
> This enables a simple reset controller driver for reset lines that
> that can be asserted and deasserted by toggling bits in a contiguous,
> diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
> index 9e501c8ac5ce..355c34482076 100644
> --- a/drivers/soc/bcm/bcm63xx/Kconfig
> +++ b/drivers/soc/bcm/bcm63xx/Kconfig
> @@ -13,8 +13,8 @@ endif # SOC_BCM63XX
>
> config BCM_PMB
> bool "Broadcom PMB (Power Management Bus) driver"
> - depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
> - default ARCH_BCM4908
> + depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
> + default ARCH_BCMBCA
> select PM_GENERIC_DOMAINS if PM
> help
> This enables support for the Broadcom's PMB (Power Management Bus) that
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index e3279544b03c..f32bb01c3feb 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
> config SERIAL_BCM63XX
> tristate "Broadcom BCM63xx/BCM33xx UART support"
> select SERIAL_CORE
> - depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
> - default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
> + depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
> + default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
> help
> This enables the driver for the onchip UART core found on
> the following chipsets:
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 32fd37698932..1f85ec8a4b3b 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1798,7 +1798,7 @@ config BCM7038_WDT
> tristate "BCM63xx/BCM7038 Watchdog"
> select WATCHDOG_CORE
> depends on HAS_IOMEM
> - depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
> + depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
> help
> Watchdog driver for the built-in hardware in Broadcom 7038 and
> later SoCs used in set-top boxes. BCM7038 was made public
> --
> 2.34.1
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists