[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220721195936.1082422-6-marcel@ziswiler.com>
Date: Thu, 21 Jul 2022 21:59:28 +0200
From: Marcel Ziswiler <marcel@...wiler.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Fabio Estevam <festevam@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v1 05/12] ARM: dts: imx7d-pico: indent use tabs, no spaces at start of line
From: Marcel Ziswiler <marcel.ziswiler@...adex.com>
Avoid the following checkpatch warning:
arch/arm/boot/dts/imx7d-pico.dtsi:44: error: code indent should use tabs
where possible
arch/arm/boot/dts/imx7d-pico.dtsi:44: warning: please, no spaces at the
start of a line
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
---
arch/arm/boot/dts/imx7d-pico.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e519897fae08..e0bff39e8d3e 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -41,7 +41,7 @@ reg_lcd_3v3: regulator-lcd-3v3 {
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
- };
+ };
reg_wlreg_on: regulator-wlreg_on {
compatible = "regulator-fixed";
@@ -432,7 +432,7 @@ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
- MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */
+ MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */
>;
};
@@ -493,19 +493,19 @@ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14
pinctrl_pwm1: pwm1 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
+ MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
>;
};
pinctrl_pwm2: pwm2 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f
>;
};
pinctrl_pwm3: pwm3 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
+ MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
>;
};
--
2.35.1
Powered by blists - more mailing lists