| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YtlyDZEsOZHt6tRs@MiWiFi-R3L-srv>
Date: Thu, 21 Jul 2022 23:34:37 +0800
From: Baoquan He <bhe@...hat.com>
To: corbet@....net, Slark Xiao <slark_xiao@....com>
Cc: vgoyal@...hat.com, dyoung@...hat.com, ast@...nel.org,
daniel@...earbox.net, andrii@...nel.org, martin.lau@...ux.dev,
song@...nel.org, yhs@...com, john.fastabend@...il.com,
kpsingh@...nel.org, sdf@...gle.com, haoluo@...gle.com,
jolsa@...nel.org, william.gray@...aro.org, dhowells@...hat.com,
peterz@...radead.org, mingo@...hat.com, will@...nel.org,
longman@...hat.com, boqun.feng@...il.com, tglx@...utronix.de,
bigeasy@...utronix.de, kexec@...ts.infradead.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
bpf@...r.kernel.org, linux-cachefs@...hat.com
Subject: Re: [PATCH v2] docs: Fix typo in comment
On 07/21/22 at 09:56am, Slark Xiao wrote:
> Fix typo in the comment
When searching the typo 'the the' in kernel, I found it exists in so
many places. We can sweep them away at one time, lest patches posted to
fix them again and again.
From 8185cce9e9afac63b760280aca12c0fca0e6f9fe Mon Sep 17 00:00:00 2001
From: Baoquan He <bhe@...hat.com>
Date: Thu, 21 Jul 2022 23:16:42 +0800
Subject: [PATCH] Fix all occurences of the 'the the' typo
Content-type: text/plain
The fix is done with below command.
sed -i "s/the the /the /g" `git grep -l "the the "`
Signed-off-by: Baoquan He <bhe@...hat.com>
---
Documentation/ABI/stable/sysfs-module | 2 +-
Documentation/ABI/testing/sysfs-class-rtrs-client | 2 +-
Documentation/ABI/testing/sysfs-class-rtrs-server | 2 +-
.../ABI/testing/sysfs-devices-platform-ACPI-TAD | 2 +-
Documentation/ABI/testing/sysfs-devices-power | 2 +-
Documentation/admin-guide/kdump/vmcoreinfo.rst | 2 +-
Documentation/bpf/map_cgroup_storage.rst | 4 ++--
Documentation/core-api/cpu_hotplug.rst | 2 +-
.../devicetree/bindings/arm/msm/qcom,saw2.txt | 2 +-
.../devicetree/bindings/clock/ti/davinci/pll.txt | 2 +-
Documentation/devicetree/bindings/fpga/fpga-region.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pisosr.txt | 2 +-
Documentation/devicetree/bindings/net/qcom-emac.txt | 2 +-
.../phy/amlogic,meson-axg-mipi-pcie-analog.yaml | 2 +-
.../bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 2 +-
.../bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 2 +-
.../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 +-
.../bindings/power/amlogic,meson-ee-pwrc.yaml | 2 +-
Documentation/devicetree/bindings/powerpc/fsl/cpus.txt | 2 +-
.../devicetree/bindings/powerpc/opal/power-mgt.txt | 2 +-
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 2 +-
.../devicetree/bindings/sound/tlv320adcx140.yaml | 4 ++--
.../bindings/thermal/brcm,avs-ro-thermal.yaml | 2 +-
.../bindings/thermal/nvidia,tegra124-soctherm.txt | 2 +-
.../devicetree/bindings/thermal/rcar-thermal.yaml | 2 +-
Documentation/driver-api/isa.rst | 2 +-
Documentation/filesystems/caching/backend-api.rst | 2 +-
Documentation/locking/seqlock.rst | 2 +-
Documentation/sphinx/cdomain.py | 2 +-
arch/arm/Kconfig | 4 ++--
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-pxa/hx4700-pcmcia.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/m68k/coldfire/intc-2.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/kernel/sthyi.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/crypto/nx/nx-common-powernv.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/dma/mediatek/mtk-hsdma.c | 2 +-
drivers/extcon/extcon.c | 2 +-
drivers/firmware/qcom_scm.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 2 +-
drivers/gpu/drm/amd/include/atombios.h | 4 ++--
drivers/gpu/drm/display/drm_dp_helper.c | 4 ++--
drivers/gpu/drm/drm_ioctl.c | 2 +-
drivers/gpu/drm/drm_panel_orientation_quirks.c | 2 +-
drivers/gpu/drm/drm_prime.c | 2 +-
drivers/gpu/drm/i915/i915_irq.c | 2 +-
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c | 2 +-
drivers/gpu/drm/panel/panel-novatek-nt35510.c | 8 ++++----
drivers/gpu/drm/pl111/pl111_display.c | 2 +-
drivers/gpu/drm/vc4/vc4_regs.h | 2 +-
drivers/hid/intel-ish-hid/ishtp-hid-client.c | 2 +-
drivers/iio/magnetometer/hmc5843_core.c | 2 +-
drivers/infiniband/core/roce_gid_mgmt.c | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/infiniband/ulp/ipoib/ipoib_ib.c | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/mailbox/Kconfig | 2 +-
drivers/md/dm-raid.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/i2c/mt9v111.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/ti/davinci/vpbe.c | 2 +-
drivers/media/platform/ti/omap3isp/isp.c | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/cxl/cxl.h | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mmc/host/dw_mmc.c | 2 +-
drivers/mmc/host/sdhci-acpi.c | 2 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/ethernet/agere/et131x.c | 2 +-
.../ethernet/aquantia/atlantic/macsec/macsec_struct.h | 4 ++--
drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 4 ++--
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/netronome/nfp/bpf/jit.c | 2 +-
drivers/net/ethernet/netronome/nfp/flower/lag_conf.c | 2 +-
drivers/net/ipa/gsi_private.h | 2 +-
drivers/net/ipa/gsi_trans.c | 4 ++--
drivers/net/ipa/ipa_qmi_msg.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 6 +++---
.../net/wireless/broadcom/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/intel/iwlwifi/fw/api/tx.h | 4 ++--
drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c | 2 +-
drivers/net/wireless/marvell/mwifiex/sdio.c | 2 +-
drivers/net/wireless/quantenna/qtnfmac/qlink.h | 4 ++--
drivers/net/wireless/rsi/rsi_91x_sdio.c | 2 +-
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c | 2 +-
drivers/phy/broadcom/phy-brcm-usb-init.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/platform/chrome/wilco_ec/event.c | 2 +-
drivers/power/supply/power_supply_sysfs.c | 2 +-
drivers/power/supply/tps65217_charger.c | 2 +-
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/s390/scsi/zfcp_diag.h | 2 +-
drivers/scsi/aacraid/aachba.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe_ctlr.c | 2 +-
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 10 +++++-----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +-
drivers/scsi/lpfc/lpfc_init.c | 4 ++--
drivers/scsi/lpfc/lpfc_mbox.c | 4 ++--
drivers/scsi/lpfc/lpfc_nvmet.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/dwc2/hcd.c | 2 +-
drivers/usb/host/max3421-hcd.c | 2 +-
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
fs/afs/flock.c | 2 +-
fs/ecryptfs/keystore.c | 2 +-
fs/kernfs/file.c | 2 +-
fs/xfs/libxfs/xfs_alloc.c | 2 +-
fs/xfs/xfs_dquot.c | 2 +-
include/linux/fs.h | 2 +-
include/linux/seqlock.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
lib/mpi/mpiutil.c | 2 +-
lib/zstd/compress/zstd_compress.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
tools/include/uapi/asm-generic/fcntl.h | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
.../pmu-events/arch/x86/cascadelakex/uncore-other.json | 2 +-
.../perf/pmu-events/arch/x86/silvermont/pipeline.json | 2 +-
.../pmu-events/arch/x86/skylakex/uncore-other.json | 2 +-
tools/perf/util/cs-etm.c | 2 +-
tools/power/x86/turbostat/turbostat.c | 2 +-
.../futex/functional/futex_requeue_pi_signal_restart.c | 2 +-
.../selftests/net/forwarding/vxlan_asymmetric.sh | 2 +-
tools/thermal/tmon/pid.c | 2 +-
166 files changed, 188 insertions(+), 188 deletions(-)
diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module
index 560b4a3278df..41b1f16e8795 100644
--- a/Documentation/ABI/stable/sysfs-module
+++ b/Documentation/ABI/stable/sysfs-module
@@ -38,7 +38,7 @@ What: /sys/module/<MODULENAME>/srcversion
Date: Jun 2005
Description:
If the module source has MODULE_VERSION, this file will contain
- the checksum of the the source code.
+ the checksum of the source code.
What: /sys/module/<MODULENAME>/version
Date: Jun 2005
diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-client b/Documentation/ABI/testing/sysfs-class-rtrs-client
index 49a4157c7bf1..fecc59d1b96f 100644
--- a/Documentation/ABI/testing/sysfs-class-rtrs-client
+++ b/Documentation/ABI/testing/sysfs-class-rtrs-client
@@ -78,7 +78,7 @@ What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_name
Date: Feb 2020
KernelVersion: 5.7
Contact: Jack Wang <jinpu.wang@...ud.ionos.com> Danil Kipnis <danil.kipnis@...ud.ionos.com>
-Description: RO, Contains the the name of HCA the connection established on.
+Description: RO, Contains the name of HCA the connection established on.
What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_port
Date: Feb 2020
diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-server b/Documentation/ABI/testing/sysfs-class-rtrs-server
index 3b6d5b067df0..b08601d80409 100644
--- a/Documentation/ABI/testing/sysfs-class-rtrs-server
+++ b/Documentation/ABI/testing/sysfs-class-rtrs-server
@@ -24,7 +24,7 @@ What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_name
Date: Feb 2020
KernelVersion: 5.7
Contact: Jack Wang <jinpu.wang@...ud.ionos.com> Danil Kipnis <danil.kipnis@...ud.ionos.com>
-Description: RO, Contains the the name of HCA the connection established on.
+Description: RO, Contains the name of HCA the connection established on.
What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_port
Date: Feb 2020
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD b/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
index f7b360a61b21..bc44bc903bc8 100644
--- a/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
+++ b/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
@@ -74,7 +74,7 @@ Description:
Reads also cause the AC alarm timer status to be reset.
- Another way to reset the the status of the AC alarm timer is to
+ Another way to reset the status of the AC alarm timer is to
write (the number) 0 to this file.
If the status return value indicates that the timer has expired,
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 1b2a2d41ff80..54195530e97a 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -303,5 +303,5 @@ Date: Apr 2010
Contact: Dominik Brodowski <linux@...inikbrodowski.net>
Description:
Reports the runtime PM children usage count of a device, or
- 0 if the the children will be ignored.
+ 0 if the children will be ignored.
diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 8419019b6a88..6726f439958c 100644
--- a/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -200,7 +200,7 @@ prb
A pointer to the printk ringbuffer (struct printk_ringbuffer). This
may be pointing to the static boot ringbuffer or the dynamically
-allocated ringbuffer, depending on when the the core dump occurred.
+allocated ringbuffer, depending on when the core dump occurred.
Used by user-space tools to read the active kernel log buffer.
printk_rb_static
diff --git a/Documentation/bpf/map_cgroup_storage.rst b/Documentation/bpf/map_cgroup_storage.rst
index cab9543017bf..8e5fe532c07e 100644
--- a/Documentation/bpf/map_cgroup_storage.rst
+++ b/Documentation/bpf/map_cgroup_storage.rst
@@ -31,7 +31,7 @@ The map uses key of type of either ``__u64 cgroup_inode_id`` or
};
``cgroup_inode_id`` is the inode id of the cgroup directory.
-``attach_type`` is the the program's attach type.
+``attach_type`` is the program's attach type.
Linux 5.9 added support for type ``__u64 cgroup_inode_id`` as the key type.
When this key type is used, then all attach types of the particular cgroup and
@@ -155,7 +155,7 @@ However, the BPF program can still only associate with one map of each type
``BPF_MAP_TYPE_CGROUP_STORAGE`` or more than one
``BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE``.
-In all versions, userspace may use the the attach parameters of cgroup and
+In all versions, userspace may use the attach parameters of cgroup and
attach type pair in ``struct bpf_cgroup_storage_key`` as the key to the BPF map
APIs to read or update the storage for a given attachment. For Linux 5.9
attach type shared storages, only the first value in the struct, cgroup inode
diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst
index c6f4ba2fb32d..f75778d37488 100644
--- a/Documentation/core-api/cpu_hotplug.rst
+++ b/Documentation/core-api/cpu_hotplug.rst
@@ -560,7 +560,7 @@ available:
* cpuhp_state_remove_instance(state, node)
* cpuhp_state_remove_instance_nocalls(state, node)
-The arguments are the same as for the the cpuhp_state_add_instance*()
+The arguments are the same as for the cpuhp_state_add_instance*()
variants above.
The functions differ in the way how the installed callbacks are treated:
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
index 94d50a949be1..c0e3c3a42bea 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
@@ -10,7 +10,7 @@ system, notifying them when a low power state is entered or exited.
Multiple revisions of the SAW hardware are supported using these Device Nodes.
SAW2 revisions differ in the register offset and configuration data. Also, the
same revision of the SAW in different SoCs may have different configuration
-data due the the differences in hardware capabilities. Hence the SoC name, the
+data due the differences in hardware capabilities. Hence the SoC name, the
version of the SAW hardware in that SoC and the distinction between cpu (big
or Little) or cache, may be needed to uniquely identify the SAW register
configuration and initialization data. The compatible string is used to
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
index 36998e184821..c9894538315b 100644
--- a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
@@ -15,7 +15,7 @@ Required properties:
- for "ti,da850-pll1", shall be "clksrc"
Optional properties:
-- ti,clkmode-square-wave: Indicates that the the board is supplying a square
+- ti,clkmode-square-wave: Indicates that the board is supplying a square
wave input on the OSCIN pin instead of using a crystal oscillator.
This property is only valid when compatible = "ti,da850-pll0".
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index 7d3515264838..6694ef29a267 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -330,7 +330,7 @@ succeeded.
The Device Tree Overlay will contain:
* "target-path" or "target"
- The insertion point where the the contents of the overlay will go into the
+ The insertion point where the contents of the overlay will go into the
live tree. target-path is a full path, while target is a phandle.
* "ranges"
The address space mapping from processor to FPGA bus(ses).
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
index 414a01cdf715..fba3c61f6a5b 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
@@ -14,7 +14,7 @@ Optional properties:
- ngpios : Number of used GPIO lines (0..n-1), default is 8.
- load-gpios : GPIO pin specifier attached to load enable, this
pin is pulsed before reading from the device to
- load input pin values into the the device.
+ load input pin values into the device.
For other required and optional properties of SPI slave
nodes please refer to ../spi/spi-bus.txt.
diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt
index 346e6c7f47b7..e6cb2291471c 100644
--- a/Documentation/devicetree/bindings/net/qcom-emac.txt
+++ b/Documentation/devicetree/bindings/net/qcom-emac.txt
@@ -14,7 +14,7 @@ MAC node:
- mac-address : The 6-byte MAC address. If present, it is the default
MAC address.
- internal-phy : phandle to the internal PHY node
-- phy-handle : phandle the the external PHY node
+- phy-handle : phandle the external PHY node
Internal PHY node:
- compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
index 4d01f3124e1c..a90fa1baadab 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
@@ -16,7 +16,7 @@ description: |+
- compatible: Should be the following:
"amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
- Refer to the the bindings described in
+ Refer to the bindings described in
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index c689bea7ce6e..d3a8911728d0 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -16,7 +16,7 @@ description: |+
- compatible: Should be one of the following:
"aspeed,ast2400-scu", "syscon", "simple-mfd"
- Refer to the the bindings described in
+ Refer to the bindings described in
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 9db904a528ee..5d2c1b1fb7fd 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -17,7 +17,7 @@ description: |+
"aspeed,ast2500-scu", "syscon", "simple-mfd"
"aspeed,g5-scu", "syscon", "simple-mfd"
- Refer to the the bindings described in
+ Refer to the bindings described in
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 3666ac5b6518..e92686d2f062 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -16,7 +16,7 @@ description: |+
- compatible: Should be one of the following:
"aspeed,ast2600-scu", "syscon", "simple-mfd"
- Refer to the the bindings described in
+ Refer to the bindings described in
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index f005abac7079..4e52ef33a986 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -17,7 +17,7 @@ description: |+
- compatible: Should be the following:
"amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
- Refer to the the bindings described in
+ Refer to the bindings described in
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
index d63ab1dec16d..801c66069121 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -5,7 +5,7 @@ Copyright 2013 Freescale Semiconductor Inc.
Power Architecture CPUs in Freescale SOCs are represented in device trees as
per the definition in the Devicetree Specification.
-In addition to the the Devicetree Specification definitions, the properties
+In addition to the Devicetree Specification definitions, the properties
defined below may be present on CPU nodes.
PROPERTIES
diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
index 9d619e955576..d6658d3dd15e 100644
--- a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
+++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
@@ -39,7 +39,7 @@ otherwise. The length of all the property arrays must be the same.
- ibm,cpu-idle-state-flags:
Array of unsigned 32-bit values containing the values of the
- flags associated with the the aforementioned idle-states. The
+ flags associated with the aforementioned idle-states. The
flag bits are as follows:
0x00000001 /* Decrementer would stop */
0x00000002 /* Needs timebase restore */
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index b677900b3aae..658f96fbc4fe 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -37,7 +37,7 @@ on the Qualcomm Hexagon core.
- interrupt-names:
Usage: required
Value type: <stringlist>
- Definition: The interrupts needed depends on the the compatible
+ Definition: The interrupts needed depends on the compatible
string:
qcom,q6v5-pil:
qcom,ipq8074-wcss-pil:
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index 2ad17b361db0..bc2fb1a80ed7 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -68,9 +68,9 @@ properties:
array is defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>.
0 - (default) Odd channel is latched on the negative edge and even
- channel is latched on the the positive edge.
+ channel is latched on the positive edge.
1 - Odd channel is latched on the positive edge and even channel is
- latched on the the negative edge.
+ latched on the negative edge.
PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data
PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
index 1ab5070c751d..89a2c32c0ab2 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -16,7 +16,7 @@ description: |+
- compatible: Should be one of the following:
"brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
- Refer to the the bindings described in
+ Refer to the bindings described in
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
index db880e7ed713..aea4a2a178b9 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
@@ -96,7 +96,7 @@ critical trip point is reported back to the thermal framework to implement
software shutdown.
- the "hot" type trip points will be set to SOC_THERM hardware as the throttle
-temperature. Once the the temperature of this thermal zone is higher
+temperature. Once the temperature of this thermal zone is higher
than it, it will trigger the HW throttle event.
Example :
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
index 927de79ab4b5..00dcbdd36144 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -42,7 +42,7 @@ properties:
description:
Address ranges of the thermal registers. If more then one range is given
the first one must be the common registers followed by each sensor
- according the the datasheet.
+ according the datasheet.
minItems: 1
maxItems: 4
diff --git a/Documentation/driver-api/isa.rst b/Documentation/driver-api/isa.rst
index def4a7b690b5..3df1b1696524 100644
--- a/Documentation/driver-api/isa.rst
+++ b/Documentation/driver-api/isa.rst
@@ -100,7 +100,7 @@ I believe platform_data is available for this, but if rather not, moving
the isa_driver pointer to the private struct isa_dev is ofcourse fine as
well.
-Then, if the the driver did not provide a .match, it matches. If it did,
+Then, if the driver did not provide a .match, it matches. If it did,
the driver match() method is called to determine a match.
If it did **not** match, dev->platform_data is reset to indicate this to
diff --git a/Documentation/filesystems/caching/backend-api.rst b/Documentation/filesystems/caching/backend-api.rst
index d7507becf674..3a199fc50828 100644
--- a/Documentation/filesystems/caching/backend-api.rst
+++ b/Documentation/filesystems/caching/backend-api.rst
@@ -122,7 +122,7 @@ volumes, calling::
to tell fscache that a volume has been withdrawn. This waits for all
outstanding accesses on the volume to complete before returning.
-When the the cache is completely withdrawn, fscache should be notified by
+When the cache is completely withdrawn, fscache should be notified by
calling::
void fscache_relinquish_cache(struct fscache_cache *cache);
diff --git a/Documentation/locking/seqlock.rst b/Documentation/locking/seqlock.rst
index 64405e5da63e..bfda1a5fecad 100644
--- a/Documentation/locking/seqlock.rst
+++ b/Documentation/locking/seqlock.rst
@@ -39,7 +39,7 @@ as the writer can invalidate a pointer that the reader is following.
Sequence counters (``seqcount_t``)
==================================
-This is the the raw counting mechanism, which does not protect against
+This is the raw counting mechanism, which does not protect against
multiple writers. Write side critical sections must thus be serialized
by an external lock.
diff --git a/Documentation/sphinx/cdomain.py b/Documentation/sphinx/cdomain.py
index ca8ac9e59ded..a7d1866e72ff 100644
--- a/Documentation/sphinx/cdomain.py
+++ b/Documentation/sphinx/cdomain.py
@@ -151,7 +151,7 @@ class CObject(Base_CObject):
def handle_func_like_macro(self, sig, signode):
u"""Handles signatures of function-like macros.
- If the objtype is 'function' and the the signature ``sig`` is a
+ If the objtype is 'function' and the signature ``sig`` is a
function-like macro, the name of the macro is returned. Otherwise
``False`` is returned. """
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7630ba9cb6cc..b07c31f6a13e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1636,7 +1636,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
@@ -1794,7 +1794,7 @@ config DMI
continue to boot on existing non-UEFI platforms.
NOTE: This does *NOT* enable or encourage the use of DMI quirks,
- i.e., the the practice of identifying the platform via DMI to
+ i.e., the practice of identifying the platform via DMI to
decide whether certain workarounds for buggy hardware and/or
firmware need to be enabled. This would require the DMI subsystem
to be enabled much earlier than we do on ARM, which is non-trivial.
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index b51f85417f58..5fc323586c7a 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -10,7 +10,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c b/arch/arm/mach-pxa/hx4700-pcmcia.c
index e2331dfe427d..860b78aed18c 100644
--- a/arch/arm/mach-pxa/hx4700-pcmcia.c
+++ b/arch/arm/mach-pxa/hx4700-pcmcia.c
@@ -30,7 +30,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index e47d3ec2cfb4..9de7fbc797af 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -66,7 +66,7 @@
prepare crypto_aes_inv_sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v15.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/m68k/coldfire/intc-2.c b/arch/m68k/coldfire/intc-2.c
index 995093357c59..376e37855ebd 100644
--- a/arch/m68k/coldfire/intc-2.c
+++ b/arch/m68k/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@...pgear.com>
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index b179f8f6d287..8651fe351276 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -456,7 +456,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index 73c77814687a..b17a0d199851 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -17,7 +17,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 332a49965130..0fda19b1e21d 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1160,7 +1160,7 @@ static void perf_event_count_update(struct perf_event *event, u64 count)
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/kernel/sthyi.c b/arch/s390/kernel/sthyi.c
index 4d141e2c132e..dfc350fab384 100644
--- a/arch/s390/kernel/sthyi.c
+++ b/arch/s390/kernel/sthyi.c
@@ -250,7 +250,7 @@ static void fill_diag_mac(struct sthyi_sctns *sctns,
sctns->mac.infmval1 |= MAC_CNT_VLD;
}
-/* Returns a pointer to the the next partition block. */
+/* Returns a pointer to the next partition block. */
static struct diag204_x_part_block *lpar_cpu_inf(struct lpar_cpu_inf *part_inf,
bool this_lpar,
void *diag224_buf,
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 31b0c1983286..385c61d199cd 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -310,7 +310,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 230cf852fa9c..e795390b070f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -544,7 +544,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/crypto/nx/nx-common-powernv.c b/drivers/crypto/nx/nx-common-powernv.c
index f418817c0f43..f34c75a862f2 100644
--- a/drivers/crypto/nx/nx-common-powernv.c
+++ b/drivers/crypto/nx/nx-common-powernv.c
@@ -75,7 +75,7 @@ static int (*nx842_powernv_exec)(const unsigned char *in,
/**
* setup_indirect_dde - Setup an indirect DDE
*
- * The DDE is setup with the the DDE count, byte count, and address of
+ * The DDE is setup with the DDE count, byte count, and address of
* first direct DDE in the list.
*/
static void setup_indirect_dde(struct data_descriptor_entry *dde,
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 265ef3e96fdd..f104e8a43036 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -421,7 +421,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
index 9ebd9231f62f..434b6306a450 100644
--- a/drivers/dma/mediatek/mtk-hsdma.c
+++ b/drivers/dma/mediatek/mtk-hsdma.c
@@ -138,7 +138,7 @@ struct mtk_hsdma_vdesc {
/**
* struct mtk_hsdma_cb - This is the struct holding extra info required for RX
- * ring to know what relevant VD the the PD is being
+ * ring to know what relevant VD the PD is being
* mapped to.
* @vd: Pointer to the relevant VD.
* @flag: Flag indicating what action should be taken when VD
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index d3a32b806499..0e40418ad287 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -247,7 +247,7 @@ static int find_cable_index_by_id(struct extcon_dev *edev, const unsigned int id
{
int i;
- /* Find the the index of extcon cable in edev->supported_cable */
+ /* Find the index of extcon cable in edev->supported_cable */
for (i = 0; i < edev->max_supported; i++) {
if (edev->supported_cable[i] == id)
return i;
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 3163660fa8e2..4623d2919ed0 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1337,7 +1337,7 @@ static int qcom_scm_probe(struct platform_device *pdev)
/*
* If requested enable "download mode", from this point on warmboot
- * will cause the the boot stages to enter download mode, unless
+ * will cause the boot stages to enter download mode, unless
* disabled below by a clean shutdown/reboot.
*/
if (download_mode)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
index d16c8c1f72db..f90149941651 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
@@ -46,7 +46,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed.
+ * that the relevant GPU caches have been flushed.
*/
struct amdgpu_fence {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index dc76d2b3ce52..8530befb2051 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -54,7 +54,7 @@
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
* associated with each VMID. When executing a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/gpu/drm/amd/include/atombios.h b/drivers/gpu/drm/amd/include/atombios.h
index 1f9df4e7509b..15943bc21bc5 100644
--- a/drivers/gpu/drm/amd/include/atombios.h
+++ b/drivers/gpu/drm/amd/include/atombios.h
@@ -3255,8 +3255,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
index e7c22c2ca90c..c258cbd6857b 100644
--- a/drivers/gpu/drm/display/drm_dp_helper.c
+++ b/drivers/gpu/drm/display/drm_dp_helper.c
@@ -1595,9 +1595,9 @@ static int drm_dp_aux_reply_duration(const struct drm_dp_aux_msg *msg)
/*
* Calculate the length of the i2c transfer in usec, assuming
- * the i2c bus speed is as specified. Gives the the "worst"
+ * the i2c bus speed is as specified. Gives the "worst"
* case estimate, ie. successful while as long as possible.
- * Doesn't account the the "MOT" bit, and instead assumes each
+ * Doesn't account the "MOT" bit, and instead assumes each
* message includes a START, ADDRESS and STOP. Neither does it
* account for additional random variables such as clock stretching.
*/
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index 51fcf1298023..8faad23dc1d8 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -83,7 +83,7 @@
*
* 1. Directly call VERSION to get the version and to match against the driver
* name returned by that ioctl. Note that SET_VERSION is not called, which
- * means the the unique name for the master node just opening is _not_ filled
+ * means the unique name for the master node just opening is _not_ filled
* out. This despite that with current drm device nodes are always bound to
* one device, and can't be runtime assigned like with drm 1.0.
* 2. Match driver name. If it mismatches, proceed to the next device node.
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index d4e0f2e85548..fc1728d46ac2 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -193,7 +193,7 @@ static const struct dmi_system_id orientation_data[] = {
},
.driver_data = (void *)&lcd800x1280_rightside_up,
}, { /*
- * GPD Pocket, note that the the DMI data is less generic then
+ * GPD Pocket, note that the DMI data is less generic then
* it seems, devices with a board-vendor of "AMI Corporation"
* are quite rare, as are devices which have both board- *and*
* product-id set to "Default String"
diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
index e3f09f18110c..a3f180653b8b 100644
--- a/drivers/gpu/drm/drm_prime.c
+++ b/drivers/gpu/drm/drm_prime.c
@@ -839,7 +839,7 @@ EXPORT_SYMBOL(drm_prime_pages_to_sg);
* @sgt: sg_table describing the buffer to check
*
* This helper calculates the contiguous size in the DMA address space
- * of the the buffer described by the provided sg_table.
+ * of the buffer described by the provided sg_table.
*
* This is useful for implementing
* &drm_gem_object_funcs.gem_prime_import_sg_table.
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 73cebc6aa650..783a6ca41a61 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -65,7 +65,7 @@
/*
* Interrupt statistic for PMU. Increments the counter only if the
- * interrupt originated from the the GPU so interrupts from a device which
+ * interrupt originated from the GPU so interrupts from a device which
* shares the interrupt line are not accounted.
*/
static inline void pmu_irq_stats(struct drm_i915_private *i915,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c
index 8bf00b396ec1..ca6dc8884bc9 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c
@@ -1048,7 +1048,7 @@ nvkm_vmm_ctor(const struct nvkm_vmm_func *func, struct nvkm_mmu *mmu,
__mutex_init(&vmm->mutex, "&vmm->mutex", key ? key : &_key);
/* Locate the smallest page size supported by the backend, it will
- * have the the deepest nesting of page tables.
+ * have the deepest nesting of page tables.
*/
while (page[1].shift)
page++;
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
index 873cbd38e6d3..4085822f619a 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
@@ -190,7 +190,7 @@ struct nt35510_config {
* 6 = Hsync x 2
* 7 = Hsync x 4
* bits 4..6 in the upper nibble controls BTP, the boosting
- * amplification for the the step-up circuit:
+ * amplification for the step-up circuit:
* 0 = Disable
* 1 = 1.5 x VDDB
* 2 = 1.66 x VDDB
@@ -211,7 +211,7 @@ struct nt35510_config {
* bits 0..2 in the lower nibble controls NCK, the booster clock
* frequency, the values are the same as for PCK in @bt1ctr.
* bits 4..5 in the upper nibble controls BTN, the boosting
- * amplification for the the step-up circuit.
+ * amplification for the step-up circuit.
* 0 = Disable
* 1 = -1.5 x VDDB
* 2 = -2 x VDDB
@@ -231,7 +231,7 @@ struct nt35510_config {
* bits 0..2 in the lower nibble controls HCK, the booster clock
* frequency, the values are the same as for PCK in @bt1ctr.
* bits 4..5 in the upper nibble controls BTH, the boosting
- * amplification for the the step-up circuit.
+ * amplification for the step-up circuit.
* 0 = AVDD + VDDB
* 1 = AVDD - AVEE
* 2 = AVDD - AVEE + VDDB
@@ -250,7 +250,7 @@ struct nt35510_config {
* bits 0..2 in the lower nibble controls LCK, the booster clock
* frequency, the values are the same as for PCK in @bt1ctr.
* bits 4..5 in the upper nibble controls BTL, the boosting
- * amplification for the the step-up circuit.
+ * amplification for the step-up circuit.
* 0 = AVEE + VCL
* 1 = AVEE - AVDD
* 2 = AVEE + VCL - AVDD
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index 443e3b932322..2fdd3b968e87 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -248,7 +248,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
cntl |= CNTL_ST_CDWID_24;
/*
- * Note that the the ARM hardware's format reader takes 'r' from
+ * Note that the ARM hardware's format reader takes 'r' from
* the low bit, while DRM formats list channels from high bit
* to low bit as you read left to right. The ST Micro version of
* the PL110 (LCDC) however uses the standard DRM format.
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index a2b5cbbbc1b0..f0290fad991d 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -264,7 +264,7 @@
* output line.
*/
# define SCALER_DISPSTAT_ESLINE(x) BIT(10 + ((x) * 8))
-/* Set when the the downstream tries to read from the display FIFO
+/* Set when the downstream tries to read from the display FIFO
* while it's empty.
*/
# define SCALER_DISPSTAT_EUFLOW(x) BIT(9 + ((x) * 8))
diff --git a/drivers/hid/intel-ish-hid/ishtp-hid-client.c b/drivers/hid/intel-ish-hid/ishtp-hid-client.c
index 4338c9b68a43..e3d70c5460e9 100644
--- a/drivers/hid/intel-ish-hid/ishtp-hid-client.c
+++ b/drivers/hid/intel-ish-hid/ishtp-hid-client.c
@@ -328,7 +328,7 @@ static void process_recv(struct ishtp_cl *hid_ishtp_cl, void *recv_buf,
/**
* ish_cl_event_cb() - bus driver callback for incoming message/packet
- * @device: Pointer to the the ishtp client device for which this message
+ * @device: Pointer to the ishtp client device for which this message
* is targeted
*
* Remove the packet from the list and process the message by calling
diff --git a/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c
index 92eb2d156ddb..4a63b2da9df0 100644
--- a/drivers/iio/magnetometer/hmc5843_core.c
+++ b/drivers/iio/magnetometer/hmc5843_core.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Device driver for the the HMC5843 multi-chip module designed
+ * Device driver for the HMC5843 multi-chip module designed
* for low field magnetic sensing.
*
* Copyright (C) 2010 Texas Instruments
diff --git a/drivers/infiniband/core/roce_gid_mgmt.c b/drivers/infiniband/core/roce_gid_mgmt.c
index 68197e576433..e958c43dd28f 100644
--- a/drivers/infiniband/core/roce_gid_mgmt.c
+++ b/drivers/infiniband/core/roce_gid_mgmt.c
@@ -250,7 +250,7 @@ static bool upper_device_filter(struct ib_device *ib_dev, u32 port,
/**
* is_upper_ndev_bond_master_filter - Check if a given netdevice
- * is bond master device of netdevice of the the RDMA device of port.
+ * is bond master device of netdevice of the RDMA device of port.
* @ib_dev: IB device to check
* @port: Port to consider for adding default GID
* @rdma_ndev: Pointer to rdma netdevice
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index b37b1c6d35c6..26c615772be3 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -321,7 +321,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 2c3dca41d3bd..ab86165e45de 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -1109,7 +1109,7 @@ static bool ipoib_dev_addr_changed_valid(struct ipoib_dev_priv *priv)
* if he sets the device address back to be based on GID index 0,
* he no longer wishs to control it.
*
- * If the user doesn't control the the device address,
+ * If the user doesn't control the device address,
* IPOIB_FLAG_DEV_ADDR_SET is set and ib_find_gid failed it means
* the port GUID has changed and GID at index 0 has changed
* so we need to change priv->local_gid and priv->dev->dev_addr
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 23507fce3a2b..18ccbd45004a 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -41,7 +41,7 @@ struct gpio_mouse {
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_dev *input)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index cd5642cef01f..651f2f8f685b 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1557,7 +1557,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 05d6fae800e3..089ef39a71fa 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -66,7 +66,7 @@ config ARMADA_37XX_RWTM_MBOX
depends on ARCH_MVEBU || COMPILE_TEST
depends on OF
help
- Mailbox implementation for communication with the the firmware
+ Mailbox implementation for communication with the firmware
running on the Cortex-M3 rWTM secure processor of the Armada 37xx
SOC. Say Y here if you are building for such a device (for example
the Turris Mox router).
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 80c9f7134e9b..3247c5901fbe 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -1369,7 +1369,7 @@ static int parse_raid_params(struct raid_set *rs, struct dm_arg_set *as,
}
rs->md.bitmap_info.daemon_sleep = value;
} else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_DATA_OFFSET))) {
- /* Userspace passes new data_offset after having extended the the data image LV */
+ /* Userspace passes new data_offset after having extended the data image LV */
if (test_and_set_bit(__CTR_FLAG_DATA_OFFSET, &rs->ctr_flags)) {
rs->ti->error = "Only one data_offset argument pair allowed";
return -EINVAL;
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index 60a0952c1bca..00491bea9975 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@...vergence.de>
Copyright (C) 2004 Markus Schulz <msc@...zsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index d1d206ebdedd..0b3f6999515e 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1118,7 +1118,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/i2c/mt9v111.c b/drivers/media/i2c/mt9v111.c
index 2dc4a0f24ce8..7beca0b70b72 100644
--- a/drivers/media/i2c/mt9v111.c
+++ b/drivers/media/i2c/mt9v111.c
@@ -633,7 +633,7 @@ static int mt9v111_hw_config(struct mt9v111_dev *mt9v111)
/*
* Set pixel integration time to the whole frame time.
- * This value controls the the shutter delay when running with AE
+ * This value controls the shutter delay when running with AE
* disabled. If longer than frame time, it affects the output
* frame rate.
*/
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index f1e1fc1cb4bd..e378f3b215c7 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -24,7 +24,7 @@
/*
* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo.
+ * based on the sampling rate of the audio rds fifo.
*/
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index e79e8a5a744a..4ba10c34a16a 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -538,7 +538,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 7973ae42873a..d5f32e3ff544 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -626,7 +626,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
portf = &dev->ports[SAA7164_PORT_VBI2];
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/ti/davinci/vpbe.c b/drivers/media/platform/ti/davinci/vpbe.c
index 5f0aeb744e81..509ecc84624e 100644
--- a/drivers/media/platform/ti/davinci/vpbe.c
+++ b/drivers/media/platform/ti/davinci/vpbe.c
@@ -280,7 +280,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev: vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/ti/omap3isp/isp.c b/drivers/media/platform/ti/omap3isp/isp.c
index 4c937f3f323e..f99dda7337b9 100644
--- a/drivers/media/platform/ti/omap3isp/isp.c
+++ b/drivers/media/platform/ti/omap3isp/isp.c
@@ -1528,7 +1528,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are re-enabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 66c8e5122a0a..bc6133b525e3 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -129,7 +129,7 @@ static void dostream(struct work_struct *work)
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 98f4a63adc2a..b7842cd6f9af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1297,7 +1297,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 6d3dfa4e0bb2..5aaee916045d 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1077,7 +1077,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 21470de62d72..129bc032fe58 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1020,7 +1020,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 388675cc1765..4c87a6b986f6 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 56c61c99eb23..27a881da4d6e 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -798,7 +798,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 7a6dd91987fd..0562071cdd4a 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -1104,7 +1104,7 @@ extern const struct cxl_backend_ops cxl_native_ops;
extern const struct cxl_backend_ops cxl_guest_ops;
extern const struct cxl_backend_ops *cxl_ops;
-/* check if the given pci_dev is on the the cxl vphb bus */
+/* check if the given pci_dev is on the cxl vphb bus */
bool cxl_pci_is_vphb_device(struct pci_dev *dev);
/* decode AFU error bits in the PSL register PSL_SERR_An */
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 19dbdad8ad8a..fa1f5a632e7f 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -36,7 +36,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index ba9ae0e2df0f..fff522d347e3 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1598,7 +1598,7 @@ xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload,
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 581614196a84..7f00d7d7e35e 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1363,7 +1363,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
* is just about to roll over.
*
* We do this whole thing under spinlock and only if the
- * command hasn't already completed (indicating the the irq
+ * command hasn't already completed (indicating the irq
* already ran so we don't want the timeout).
*/
spin_lock_irqsave(&host->irq_lock, irqflags);
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index c0350e9c03f3..93fe6e5a5f9f 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -648,7 +648,7 @@ static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
* in reading a garbage value and using the wrong presets.
*
* Since HS400 and HS200 presets must be identical, we could
- * instead use the the SDR104 preset register.
+ * instead use the SDR104 preset register.
*
* If the above issues are resolved we could remove this quirk for
* firmware that that has valid presets (i.e., SDR12 <= 12 MHz).
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 889e40329956..0893320d250b 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -1359,7 +1359,7 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 078112e23dfd..d9039e7f6703 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -281,7 +281,7 @@ struct ubi_eba_leb_desc {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -439,7 +439,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 55bae06cf408..330f9ffec3a7 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -429,7 +429,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index fbf4588994ac..d19d1579c415 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -1106,7 +1106,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
writel(0, &rxmac->mif_ctrl);
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_struct.h b/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_struct.h
index b6119dcc3bb9..c2fda80fe1cc 100644
--- a/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_struct.h
+++ b/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_struct.h
@@ -158,7 +158,7 @@ struct aq_mss_egress_class_record {
* 1: compare the SNAP header.
* If this bit is set to 1, the extracted filed will assume the
* SNAP header exist as encapsulated in 802.3 (RFC 1042). I.E. the
- * next 5 bytes after the the LLC header is SNAP header.
+ * next 5 bytes after the LLC header is SNAP header.
*/
u32 snap_mask;
/*! 0: don't care and no LLC header exist.
@@ -422,7 +422,7 @@ struct aq_mss_ingress_preclass_record {
* 1: compare the SNAP header.
* If this bit is set to 1, the extracted filed will assume the
* SNAP header exist as encapsulated in 802.3 (RFC 1042). I.E. the
- * next 5 bytes after the the LLC header is SNAP header.
+ * next 5 bytes after the LLC header is SNAP header.
*/
u32 snap_mask;
/*! Mask is per-byte.
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 7de3800437c9..c2822e635f89 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2859,7 +2859,7 @@ static const struct net_device_ops cxgb4vf_netdev_ops = {
* address stored on the adapter
* @adapter: The adapter
*
- * Find the the port mask for the VF based on the index of mac
+ * Find the port mask for the VF based on the index of mac
* address stored in the adapter. If no mac address is stored on
* the adapter for the VF, use the port mask received from the
* firmware.
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index cd4e243da5fa..41acd18a3fd2 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3178,7 +3178,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts, 0);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
index 30ca9ee1900b..c499b62b49b1 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
@@ -809,7 +809,7 @@ static s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
* @hw: pointer to hardware structure
* @mbx: pointer to mailbox
*
- * This function copies the message from the the message array to mbmem
+ * This function copies the message from the message array to mbmem
**/
static void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index cbe92fd23a70..8d6e44ee1895 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2207,7 +2207,7 @@ s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index e4b50c7781ff..35c2b9b8bd19 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1737,7 +1737,7 @@ static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
* @speed: link speed
* @autoneg_wait_to_complete: unused
*
- * Configure the the integrated PHY for native SFP support.
+ * Configure the integrated PHY for native SFP support.
*/
static s32
ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
@@ -1786,7 +1786,7 @@ ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
* @speed: link speed
* @autoneg_wait_to_complete: unused
*
- * Configure the the integrated PHY for SFP support.
+ * Configure the integrated PHY for SFP support.
*/
static s32
ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 6dd451adc331..b73c7fe63500 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2156,7 +2156,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/jit.c b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
index e31f8fbbc696..df2ab5cbd49b 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/jit.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
@@ -4233,7 +4233,7 @@ static void nfp_bpf_opt_ldst_gather(struct nfp_prog *nfp_prog)
}
/* If the chain is ended by an load/store pair then this
- * could serve as the new head of the the next chain.
+ * could serve as the new head of the next chain.
*/
if (curr_pair_is_memcpy(meta1, meta2)) {
head_ld_meta = meta1;
diff --git a/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c b/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
index ede90e086b28..fb7ea5e17bda 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
@@ -234,7 +234,7 @@ nfp_fl_lag_config_group(struct nfp_fl_lag *lag, struct nfp_fl_lag_group *group,
}
/* To signal the end of a batch, both the switch and last flags are set
- * and the the reserved SYNC group ID is used.
+ * and the reserved SYNC group ID is used.
*/
if (*batch == NFP_FL_LAG_BATCH_FINISHED) {
flags |= NFP_FL_LAG_SWITCH | NFP_FL_LAG_LAST;
diff --git a/drivers/net/ipa/gsi_private.h b/drivers/net/ipa/gsi_private.h
index ea333a244cf5..d7065e23c92e 100644
--- a/drivers/net/ipa/gsi_private.h
+++ b/drivers/net/ipa/gsi_private.h
@@ -108,7 +108,7 @@ void *gsi_ring_virt(struct gsi_ring *ring, u32 index);
* gsi_channel_tx_queued() - Report the number of bytes queued to hardware
* @channel: Channel whose bytes have been queued
*
- * This arranges for the the number of transactions and bytes for
+ * This arranges for the number of transactions and bytes for
* transfer that have been queued to hardware to be reported. It
* passes this information up the network stack so it can be used to
* throttle transmissions.
diff --git a/drivers/net/ipa/gsi_trans.c b/drivers/net/ipa/gsi_trans.c
index 55f8fe7d2668..5c6874d25548 100644
--- a/drivers/net/ipa/gsi_trans.c
+++ b/drivers/net/ipa/gsi_trans.c
@@ -351,7 +351,7 @@ struct gsi_trans *gsi_channel_trans_alloc(struct gsi *gsi, u32 channel_id,
if (!gsi_trans_tre_reserve(trans_info, tre_count))
return NULL;
- /* Allocate and initialize non-zero fields in the the transaction */
+ /* Allocate and initialize non-zero fields in the transaction */
trans = gsi_trans_pool_alloc(&trans_info->pool, 1);
trans->gsi = gsi;
trans->channel_id = channel_id;
@@ -685,7 +685,7 @@ int gsi_trans_read_byte(struct gsi *gsi, u32 channel_id, dma_addr_t addr)
if (!gsi_trans_tre_reserve(trans_info, 1))
return -EBUSY;
- /* Now fill the the reserved TRE and tell the hardware */
+ /* Now fill the reserved TRE and tell the hardware */
dest_tre = gsi_ring_virt(ring, ring->index);
gsi_trans_tre_fill(dest_tre, addr, 1, true, false, IPA_CMD_NONE);
diff --git a/drivers/net/ipa/ipa_qmi_msg.h b/drivers/net/ipa/ipa_qmi_msg.h
index 3233d145fd87..495e85abe50b 100644
--- a/drivers/net/ipa/ipa_qmi_msg.h
+++ b/drivers/net/ipa/ipa_qmi_msg.h
@@ -214,7 +214,7 @@ struct ipa_init_modem_driver_req {
/* The response to a IPA_QMI_INIT_DRIVER request begins with a standard
* QMI response, but contains other information as well. Currently we
- * simply wait for the the INIT_DRIVER transaction to complete and
+ * simply wait for the INIT_DRIVER transaction to complete and
* ignore any other data that might be returned.
*/
struct ipa_init_modem_driver_rsp {
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index f9d3f3a5edfe..ba16b98c872d 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -92,7 +92,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 6b51a2dceadc..8a43c48ec1cf 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1185,7 +1185,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index fcfed8e59d29..ebdb97999335 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -498,7 +498,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
else
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, repeat_bit);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index dc0e5ea25673..090ff0600c81 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1744,7 +1744,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index 46a49f0a51b3..a1afe1f85f0e 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1961,7 +1961,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * resue the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -2098,7 +2098,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * resue the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -4142,7 +4142,7 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* Length of the responce message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering the responce will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
index 8ddfc3d06687..11b33e78127c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
@@ -3800,7 +3800,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h b/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h
index ecc6706f66ed..194de9545989 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h
@@ -200,7 +200,7 @@ enum iwl_tx_offload_assist_bz {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @reserved2: reserved
* @key: security key
@@ -858,7 +858,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c
index a3cefbc43e80..abf8585bf3bd 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c
@@ -29,7 +29,7 @@ u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index 76004bda0c02..9b91580c4f92 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -1549,7 +1549,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
/*
* This function decode sdio aggreation pkt.
*
- * Based on the the data block size and pkt_len,
+ * Based on the data block size and pkt_len,
* skb data will be decoded to few packets.
*/
static void mwifiex_deaggr_sdio_pkt(struct mwifiex_adapter *adapter,
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index 2dda4c5d7427..674461fa7fb3 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -1721,8 +1721,8 @@ enum qlink_chan_stat {
* @time_on: amount of time radio operated on that channel.
* @time_tx: amount of time radio spent transmitting on the channel.
* @time_rx: amount of time radio spent receiving on the channel.
- * @cca_busy: amount of time the the primary channel was busy.
- * @cca_busy_ext: amount of time the the secondary channel was busy.
+ * @cca_busy: amount of time the primary channel was busy.
+ * @cca_busy_ext: amount of time the secondary channel was busy.
* @time_scan: amount of radio spent scanning on the channel.
* @chan_noise: channel noise.
*/
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 9f16128e4ffa..d09998796ac0 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -796,7 +796,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
* from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 1da6ba95d3d4..1da6ab664e41 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1229,7 +1229,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
index fdbd64c03e12..32d1ff09befb 100644
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
@@ -136,7 +136,7 @@
/* TWAKEUP. */
#define MIPI_DSI_WAKEUP_TIM 0x20
-/* when in RxULPS check state, after the the logic enable the analog,
+/* when in RxULPS check state, after the logic enable the analog,
* how long we should wait to check the lP state .
*/
#define MIPI_DSI_LPOK_TIM 0x24
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
index dd0f66288fbd..dddcbd3cd5f3 100644
--- a/drivers/phy/broadcom/phy-brcm-usb-init.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -861,7 +861,7 @@ static void usb_init_common(struct brcm_usb_init_params *params)
brcmusb_usb2_eye_fix(ctrl);
/*
- * Make sure the the second and third memory controller
+ * Make sure the second and third memory controller
* interfaces are enabled if they exist.
*/
if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN))
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index d91a010e65f5..f1234e719e58 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1748,7 +1748,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/platform/chrome/wilco_ec/event.c b/drivers/platform/chrome/wilco_ec/event.c
index 814518509739..32e400590be5 100644
--- a/drivers/platform/chrome/wilco_ec/event.c
+++ b/drivers/platform/chrome/wilco_ec/event.c
@@ -343,7 +343,7 @@ static __poll_t event_poll(struct file *filp, poll_table *wait)
*
* Removes the first event from the queue, places it in the passed buffer.
*
- * If there are no events in the the queue, then one of two things happens,
+ * If there are no events in the queue, then one of two things happens,
* depending on if the file was opened in nonblocking mode: If in nonblocking
* mode, then return -EAGAIN to say there's no data. If in blocking mode, then
* block until an event is available.
diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
index 4239591e1522..5369abaceb5c 100644
--- a/drivers/power/supply/power_supply_sysfs.c
+++ b/drivers/power/supply/power_supply_sysfs.c
@@ -442,7 +442,7 @@ static int add_prop_uevent(struct device *dev, struct kobj_uevent_env *env,
if (ret == -ENODEV || ret == -ENODATA) {
/*
* When a battery is absent, we expect -ENODEV. Don't abort;
- * send the uevent with at least the the PRESENT=0 property
+ * send the uevent with at least the PRESENT=0 property
*/
return 0;
}
diff --git a/drivers/power/supply/tps65217_charger.c b/drivers/power/supply/tps65217_charger.c
index ba33d1617e0b..a4bc9f2a10bc 100644
--- a/drivers/power/supply/tps65217_charger.c
+++ b/drivers/power/supply/tps65217_charger.c
@@ -50,7 +50,7 @@ static int tps65217_config_charger(struct tps65217_charger *charger)
* tps65217 rev. G, p. 31 (see p. 32 for NTC schematic)
*
* The device can be configured to support a 100k NTC (B = 3960) by
- * setting the the NTC_TYPE bit in register CHGCONFIG1 to 1. However it
+ * setting the NTC_TYPE bit in register CHGCONFIG1 to 1. However it
* is not recommended to do so. In sleep mode, the charger continues
* charging the battery, but all register values are reset to default
* values. Therefore, the charger would get the wrong temperature
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index cb15983383f5..8d551e15b91a 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -150,7 +150,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 9e54fe76a9b2..35d4b398c197 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3565,7 +3565,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/s390/scsi/zfcp_diag.h b/drivers/s390/scsi/zfcp_diag.h
index da55133da8fe..15c25fefe91a 100644
--- a/drivers/s390/scsi/zfcp_diag.h
+++ b/drivers/s390/scsi/zfcp_diag.h
@@ -2,7 +2,7 @@
/*
* zfcp device driver
*
- * Definitions for handling diagnostics in the the zfcp device driver.
+ * Definitions for handling diagnostics in the zfcp device driver.
*
* Copyright IBM Corp. 2018, 2020
*/
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 81462f4ddb90..4d4cb47b3846 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -1050,7 +1050,7 @@ static void get_container_serial_callback(void *context, struct fib * fibptr)
vpdpage83data.type1.productid));
/* Convert to ascii based serial number.
- * The LSB is the the end.
+ * The LSB is the end.
*/
for (i = 0; i < 8; i++) {
u8 temp =
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index c21aa37b8adb..dd78bea3e111 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1971,7 +1971,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 39e16eab47aa..28e8b9f1e1a4 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -205,7 +205,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 6bc3f022630a..64e4759f25d7 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 3ad681c4c20a..db097483ff04 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index c514b20293b2..9a311a58c37c 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 3caaa7c4af48..7c1d58250672 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -2460,7 +2460,7 @@ lpfc_sriov_hw_max_virtfn_show(struct device *dev,
/**
* lpfc_enable_bbcr_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -2551,7 +2551,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -2584,7 +2584,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -2713,7 +2713,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -2745,7 +2745,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 3fababb7c181..70c0ef8d4f41 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -8666,7 +8666,7 @@ lpfc_els_rcv_rtv(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * Successful the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index fb36f26170e4..c1b9c61da280 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2453,7 +2453,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index: the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so the round robin slection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 750dd1e9f2cc..27b48f93ca42 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -5499,7 +5499,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
(bf_get(lpfc_acqe_link_speed, acqe_link)));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelvant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
@@ -12501,7 +12501,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
/* Mark CPU as IRQ not assigned by the kernel */
cpup->flag |= LPFC_CPU_MAP_UNASSIGN;
- /* If so, find a new_cpup thats on the the SAME
+ /* If so, find a new_cpup thats on the SAME
* phys_id as cpup. start_cpu will start where we
* left off so all unassigned entries don't get assgined
* the IRQ of the first entry.
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 9858b1743769..cebb3d7598e5 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2509,7 +2509,7 @@ lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
@@ -2577,7 +2577,7 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index c0ee0b39075d..6cdd32832c96 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -1471,7 +1471,7 @@ lpfc_nvmet_cleanup_io_context(struct lpfc_hba *phba)
if (!infop)
return;
- /* Cycle the the entire CPU context list for every MRQ */
+ /* Cycle the entire CPU context list for every MRQ */
for (i = 0; i < phba->cfg_nvmet_mrq; i++) {
for_each_present_cpu(j) {
infop = lpfc_get_ctx_list(phba, j, i);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 80ac3a051c19..9ee7e8a236b7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -20538,7 +20538,7 @@ lpfc_log_fw_write_cmpl(struct lpfc_hba *phba, u32 shdr_status,
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 991eb01bb1e0..1c7aae12fd2a 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3134,7 +3134,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index b56ef8af66e7..58df0145e8d0 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -385,7 +385,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index e8c64898dfce..7c7d80f96c0c 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -35,7 +35,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 3f107a06817d..d8d20aa638c9 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -999,7 +999,7 @@ static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg,
/*
* Try to figure out if we're an even or odd frame. If we set
- * even and the current frame number is even the the transfer
+ * even and the current frame number is even the transfer
* will happen immediately. Similar if both are odd. If one is
* even and the other is odd then the transfer will happen when
* the frame number ticks.
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 502a3ac5e35b..352e3ac2b377 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -312,7 +312,7 @@ static const int hrsl_to_error[] = {
/*
* See https://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
+ * reasonable overview of how control transfers use the IN/OUT
* tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 46d0b9ad6f74..ad81e9a508b1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1964,7 +1964,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 6924fa95f6bd..da8913683104 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -256,7 +256,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@...ox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 1e12b5f30dcc..23ccbba716c7 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -826,7 +826,7 @@ static int mos77xx_calc_num_ports(struct usb_serial *serial,
/*
* The 7715 uses the first bulk in/out endpoint pair for the
* parallel port, and the second for the serial port. We swap
- * the endpoint descriptors here so that the the first and
+ * the endpoint descriptors here so that the first and
* only registered port structure uses the serial-port
* endpoints.
*/
diff --git a/fs/afs/flock.c b/fs/afs/flock.c
index c4210a3964d8..801fe305878f 100644
--- a/fs/afs/flock.c
+++ b/fs/afs/flock.c
@@ -152,7 +152,7 @@ static void afs_next_locker(struct afs_vnode *vnode, int error)
}
/*
- * Kill off all waiters in the the pending lock queue due to the vnode being
+ * Kill off all waiters in the pending lock queue due to the vnode being
* deleted.
*/
static void afs_kill_lockers_enoent(struct afs_vnode *vnode)
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 3fe41964c0d8..2452d6fd7062 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -878,7 +878,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index e3abfa843879..39bde6976b03 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -243,7 +243,7 @@ static ssize_t kernfs_fop_read_iter(struct kiocb *iocb, struct iov_iter *iter)
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write_iter(struct kiocb *iocb, struct iov_iter *iter)
diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c
index d3f2886fdc08..210c0a05b933 100644
--- a/fs/xfs/libxfs/xfs_alloc.c
+++ b/fs/xfs/libxfs/xfs_alloc.c
@@ -84,7 +84,7 @@ xfs_prealloc_blocks(
/*
* The number of blocks per AG that we withhold from xfs_mod_fdblocks to
* guarantee that we can refill the AGFL prior to allocating space in a nearly
- * full AG. Although the the space described by the free space btrees, the
+ * full AG. Although the space described by the free space btrees, the
* blocks used by the freesp btrees themselves, and the blocks owned by the
* AGFL are counted in the ondisk fdblocks, it's a mistake to let the ondisk
* free space in the AG drop so low that the free space btrees cannot refill an
diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
index 5a6c3c3c4de2..8fb90da89787 100644
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -549,7 +549,7 @@ xfs_dquot_check_type(
* at the same time. The non-user quota file can be switched between
* group and project quota uses depending on the mount options, which
* means that we can encounter the other type when we try to load quota
- * defaults. Quotacheck will soon reset the the entire quota file
+ * defaults. Quotacheck will soon reset the entire quota file
* (including the root dquot) anyway, but don't log scary corruption
* reports to dmesg.
*/
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 9ad5e3520fae..a3fab3718a12 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2931,7 +2931,7 @@ extern void evict_inodes(struct super_block *sb);
void dump_mapping(const struct address_space *);
/*
- * Userspace may rely on the the inode number being non-zero. For example, glibc
+ * Userspace may rely on the inode number being non-zero. For example, glibc
* simply ignores files with zero i_ino in unlink() and other places.
*
* As an additional complication, if userspace was compiled with
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index 3926e9027947..4e2ae90554cd 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -863,7 +863,7 @@ static inline unsigned read_seqretry(const seqlock_t *sl, unsigned start)
}
/*
- * For all seqlock_t write side functions, use the the internal
+ * For all seqlock_t write side functions, use the internal
* do_write_seqcount_begin() instead of generic write_seqcount_begin().
* This way, no redundant lockdep_assert_held() checks are added.
*/
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index f13d37b60775..974629ba0c5a 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -143,7 +143,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/lib/mpi/mpiutil.c b/lib/mpi/mpiutil.c
index bc81419f400c..aa8c46544af8 100644
--- a/lib/mpi/mpiutil.c
+++ b/lib/mpi/mpiutil.c
@@ -272,7 +272,7 @@ MPI mpi_set_ui(MPI w, unsigned long u)
if (!w)
w = mpi_alloc(1);
/* FIXME: If U is 0 we have no need to resize and thus possible
- * allocating the the limbs.
+ * allocating the limbs.
*/
RESIZE_IF_NEEDED(w, 1);
w->d[0] = u;
diff --git a/lib/zstd/compress/zstd_compress.c b/lib/zstd/compress/zstd_compress.c
index a4e916008b3a..73fff4c60149 100644
--- a/lib/zstd/compress/zstd_compress.c
+++ b/lib/zstd/compress/zstd_compress.c
@@ -4441,7 +4441,7 @@ static size_t ZSTD_validateSequence(U32 offCode, U32 matchLength,
size_t posInSrc, U32 windowLog, size_t dictSize, U32 minMatch) {
size_t offsetBound;
U32 windowSize = 1 << windowLog;
- /* posInSrc represents the amount of data the the decoder would decode up to this point.
+ /* posInSrc represents the amount of data the decoder would decode up to this point.
* As long as the amount of data decoded is less than or equal to window size, offsets may be
* larger than the total length of output decoded in order to reference the dict, even larger than
* window size. After output surpasses windowSize, we're limited to windowSize offsets again.
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index ed3e0b8f3b1a..e3530cade156 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -4,7 +4,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index 7011fbe003ff..438516bdfb3c 100755
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/tools/include/uapi/asm-generic/fcntl.h b/tools/include/uapi/asm-generic/fcntl.h
index 0197042b7dfb..826afd9192d8 100644
--- a/tools/include/uapi/asm-generic/fcntl.h
+++ b/tools/include/uapi/asm-generic/fcntl.h
@@ -140,7 +140,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index be65bd55ab2a..b77957ac288b 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -285,7 +285,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user supplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user supplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WEIGHT-A being the weight of the data file
- WEIGHT-B being the weight of the baseline data file
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
index aa460d0c4851..59ab88de1b37 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
@@ -1923,7 +1923,7 @@
"EventCode": "0x25",
"EventName": "UNC_UPI_RxL0P_POWER_CYCLES",
"PerPkg": "1",
- "PublicDescription": "Counts cycles when the the receive side (Rx) of the Intel Ultra Path Interconnect(UPI) is in L0p power mode. L0p is a mode where we disable 60% of the UPI lanes, decreasing our bandwidth in order to save power.",
+ "PublicDescription": "Counts cycles when the receive side (Rx) of the Intel Ultra Path Interconnect(UPI) is in L0p power mode. L0p is a mode where we disable 60% of the UPI lanes, decreasing our bandwidth in order to save power.",
"Unit": "UPI LL"
},
{
diff --git a/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json b/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json
index 03a4c7f26698..3278c7d1654d 100644
--- a/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json
@@ -257,7 +257,7 @@
"Counter": "0,1",
"EventCode": "0xCA",
"EventName": "NO_ALLOC_CYCLES.NOT_DELIVERED",
- "PublicDescription": "The NO_ALLOC_CYCLES.NOT_DELIVERED event is used to measure front-end inefficiencies, i.e. when front-end of the machine is not delivering micro-ops to the back-end and the back-end is not stalled. This event can be used to identify if the machine is truly front-end bound. When this event occurs, it is an indication that the front-end of the machine is operating at less than its theoretical peak performance. Background: We can think of the processor pipeline as being divided into 2 broader parts: Front-end and Back-end. Front-end is responsible for fetching the instruction, decoding into micro-ops (uops) in machine understandable format and putting them into a micro-op queue to be consumed by back end. The back-end then takes these micro-ops, allocates the required resources. When all resources are ready, micro-ops are executed. If the back-end is not ready to accept micro-ops from the front-end, then we do not want to count these as front-end bottlenecks. However, whenever we have bottlenecks in the back-end, we will have allocation unit stalls and eventually forcing the front-end to wait until the back-end is ready to receive more UOPS. This event counts the cycles only when back-end is requesting more uops and front-end is not able to provide them. Some examples of conditions that cause front-end efficiencies are: Icache misses, ITLB misses, and decoder restrictions that limit the the front-end bandwidth.",
+ "PublicDescription": "The NO_ALLOC_CYCLES.NOT_DELIVERED event is used to measure front-end inefficiencies, i.e. when front-end of the machine is not delivering micro-ops to the back-end and the back-end is not stalled. This event can be used to identify if the machine is truly front-end bound. When this event occurs, it is an indication that the front-end of the machine is operating at less than its theoretical peak performance. Background: We can think of the processor pipeline as being divided into 2 broader parts: Front-end and Back-end. Front-end is responsible for fetching the instruction, decoding into micro-ops (uops) in machine understandable format and putting them into a micro-op queue to be consumed by back end. The back-end then takes these micro-ops, allocates the required resources. When all resources are ready, micro-ops are executed. If the back-end is not ready to accept micro-ops from the front-end, then we do not want to count these as front-end bottlenecks. However, whenever we have bottlenecks in the back-end, we will have allocation unit stalls and eventually forcing the front-end to wait until the back-end is ready to receive more UOPS. This event counts the cycles only when back-end is requesting more uops and front-end is not able to provide them. Some examples of conditions that cause front-end efficiencies are: Icache misses, ITLB misses, and decoder restrictions that limit the front-end bandwidth.",
"SampleAfterValue": "200003",
"UMask": "0x50"
},
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
index aa0f67613c4a..0c96e6924d62 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
@@ -1852,7 +1852,7 @@
"EventCode": "0x25",
"EventName": "UNC_UPI_RxL0P_POWER_CYCLES",
"PerPkg": "1",
- "PublicDescription": "Counts cycles when the the receive side (Rx) of the Intel Ultra Path Interconnect(UPI) is in L0p power mode. L0p is a mode where we disable 60% of the UPI lanes, decreasing our bandwidth in order to save power.",
+ "PublicDescription": "Counts cycles when the receive side (Rx) of the Intel Ultra Path Interconnect(UPI) is in L0p power mode. L0p is a mode where we disable 60% of the UPI lanes, decreasing our bandwidth in order to save power.",
"Unit": "UPI LL"
},
{
diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 8b95fb3c4d7b..16db965ac995 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -1451,7 +1451,7 @@ static int cs_etm__sample(struct cs_etm_queue *etmq,
* tidq->packet->instr_count represents the number of
* instructions in the current etm packet.
*
- * Period instructions (Pi) contains the the number of
+ * Period instructions (Pi) contains the number of
* instructions executed after the sample point(n) from the
* previous etm packet. This will always be less than
* etm->instructions_sample_period.
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index ede31a4287a0..ad4c9b79c051 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -5398,7 +5398,7 @@ void print_dev_latency(void)
}
/*
- * Linux-perf manages the the HW instructions-retired counter
+ * Linux-perf manages the HW instructions-retired counter
* by enabling when requested, and hiding rollover
*/
void linux_perf_init(void)
diff --git a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c
index f8c43ce8fe66..c6b8f32990c8 100644
--- a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c
+++ b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c
@@ -184,7 +184,7 @@ int main(int argc, char *argv[])
/*
* If res is non-zero, we either requeued the waiter or hit an
* error, break out and handle it. If it is zero, then the
- * signal may have hit before the the waiter was blocked on f1.
+ * signal may have hit before the waiter was blocked on f1.
* Try again.
*/
if (res > 0) {
diff --git a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
index 0727e2012b68..43469c7de118 100755
--- a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
@@ -525,7 +525,7 @@ arp_suppression()
log_test "neigh_suppress: on / neigh exists: yes"
- # Delete the neighbour from the the SVI. A single ARP request should be
+ # Delete the neighbour from the SVI. A single ARP request should be
# received by the remote VTEP
RET=0
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index 296f69c00c57..da20088285bd 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -27,7 +27,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
2.34.1
Powered by blists - more mailing lists