[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20220724095426.14189-1-linmengbo0689@protonmail.com>
Date: Sun, 24 Jul 2022 09:55:43 +0000
From: "Lin, Meng-Bo" <linmengbo0689@...tonmail.com>
To: devicetree@...r.kernel.org
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Stephen Boyd <sboyd@...eaurora.org>,
Stephan Gerhold <stephan@...hold.net>,
Nikita Travkin <nikita@...n.ru>, soc@...nel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: [PATCH v7 4/5] arm64: dts: qcom: msm8916-samsung-e2015: Add touchkey
On the Samsung Galaxy E5 and E7 the touch key is supplied by a single
fixed regulator (enabled via GPIO 97) that supplies both MCU and LED.
Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@...tonmail.com>
---
.../qcom/msm8916-samsung-e2015-common.dtsi | 26 +++++++++++++++++++
.../dts/qcom/msm8916-samsung-grandmax.dts | 4 +++
2 files changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
index 9caa8a161d31..542010fdfb8a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -38,6 +38,19 @@ reg_motor_vdd: regulator-motor-vdd {
pinctrl-names = "default";
pinctrl-0 = <&motor_en_default>;
};
+
+ reg_touch_key: regulator-touch-key {
+ compatible = "regulator-fixed";
+ regulator-name = "touch_key";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_en_default>;
+ };
};
&blsp_i2c2 {
@@ -48,6 +61,11 @@ &blsp_i2c2 {
/delete-node/ magnetometer@12;
};
+&touchkey {
+ vcc-supply = <®_touch_key>;
+ vdd-supply = <®_touch_key>;
+};
+
&msmgpio {
motor_en_default: motor-en-default {
pins = "gpio76";
@@ -56,4 +74,12 @@ motor_en_default: motor-en-default {
drive-strength = <2>;
bias-disable;
};
+
+ tkey_en_default: tkey-en-default {
+ pins = "gpio97";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
index 4c1becdb9428..bc7134698978 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
@@ -41,6 +41,10 @@ ®_motor_vdd {
gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
};
+®_touch_key {
+ status = "disabled";
+};
+
&msmgpio {
gpio_leds_default: gpio-led-default {
pins = "gpio60";
--
2.30.2
Powered by blists - more mailing lists