[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <MN2PR17MB3375207FA1AF24E6666BC95AB8959@MN2PR17MB3375.namprd17.prod.outlook.com>
Date: Mon, 25 Jul 2022 22:08:57 +0000
From: Vanessa Page <Vebpe@...look.com>
To: Yifei Liu <yifeliu@...stonybrook.edu>
CC: "ezk@...stonybrook.edu" <ezk@...stonybrook.edu>,
"madkar@...stonybrook.edu" <madkar@...stonybrook.edu>,
David Woodhouse <dwmw2@...radead.org>,
Richard Weinberger <richard@....at>,
"Matthew Wilcox (Oracle)" <willy@...radead.org>,
Kyeong Yoo <kyeong.yoo@...iedtelesis.co.nz>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] jffs2: correct logic when creating a hole in
jffs2_write_begin
You lame ass stalking motherfucker. You are committing a crime and I have reported you to the police.
Koop๐๐๐๐๐๐๐๐๐ด๐ด๐๐๐๐๐๐๐๐๐๐๐๐๐๐ณ๐๐ด๐๐๐๐๐คฃ๐คฃ๐๐๐๐ด๐๐คฅ๐คซ๐ฅ๐ฐ๐ฅต๐ฅต๐ก๐ก๐คฌ๐คฏ๐ญ๐ญ๐๐๐ฅณ๐คฉ๐ฅธ๐ฅธ๐ฅธ๐๐ฉ๐ฅบโน๏ธ๐ฃ๐๐๐๐๐ฃ๐ข๐ก๐ฅถ๐ฐ๐ฐ๐ฅ๐ฅ๐ถโ๐ซ๏ธ๐คฌ๐คฌ๐คฌ๐คฏ๐ถโ๐ซ๏ธ๐ฅถ๐ฐ๐ฐ๐คซ๐คซ๐๐คฏ๐คฏ๐คฏ
Ooiggvklpoure๐คฌ๐คฌ๐คฌ๐คฌ๐คฌ๐คฌ๐คฌ๐คฌ๐คฌ๐คฌ๐คฏ๐คฏ๐คฏ๐คฏ๐คฏ๐คฏ๐คฏ๐คฏ๐คฏ๐คซ๐๐คฌ๐คฏ๐คฏ๐คฌ๐คฌ๐๐๐๐๐๐๐ฅธ๐คฉ๐ฅณ๐๐๐ฅบ๐ฉ๐ฉ๐คฉ๐ฅณ๐ฅณ๐๐๐ฃ๐๐ฉโน๏ธ๐๐ซ๐ค๐ญ๐คฌ๐คฉ๐คฉ๐ฅธ๐๐๐ฉ๐ก๐ต๐ช๐ง๐คฅ๐คฅ๐ฏ๐ต๐คฎ๐ฌ๐คฅ๐๐ค๐ค๐ถ๐ฒ๐คค๐ค๐ค๐ค๐ตโ๐ซ๐ตโ๐ซ๐ตโ๐ซ๐ตโ๐ซ๐ตโ๐ซ๐ตโ๐ซ๐ตโ๐ซ๐ตโ๐ซ๐ตโ๐ซ๐ตโ๐ซ๐ตโ๐ซ๐ค๐ผ๐ฝโ ๏ธ๐๐๐ป๐ป๐ป๐น๐น๐บ๐ฝ๐ฝ๐๐๐ป๐๐๐โ ๏ธโ ๏ธโ ๏ธโ ๏ธ
> On Jul 25, 2022, at 1:04 AM, Vanessa Page <Vebpe@...look.com> wrote:
>
> ๏ปฟ๐ฅฐ๐ฅฐ๐ฅฐ๐ฅฐ๐ฅฐ๐ฅฐ๐ฅฐ๐ฅฐ๐ฅฐ๐๐๐๐๐๐๐๐๐โบ๏ธโบ๏ธโบ๏ธโบ๏ธโบ๏ธ๐๐๐๐๐๐๐ฅฐ๐๐๐๐๐๐๐โบ๏ธโบ๏ธโบ๏ธ๐๐๐๐ฅฐ๐ฅฐ๐โบ๏ธโบ๏ธ๐๐ฅฐ๐โบ๏ธ๐๐ฅฐ๐โบ๏ธโบ๏ธ๐๐ฅฐ๐ฅฐ๐โบ๏ธโบ๏ธ๐
>
> Sent from my iPhonโ๏ธ
>
>> On Jul 25, 2022, at 1:01 AM, Yifei Liu <yifeliu@...stonybrook.edu> wrote:
>>
>> ๏ปฟBug description and fix:
>>
>> 1. Write data to a file, say all 1s from offset 0 to 16.
>>
>> 2. Truncate the file to a smaller size, say 8 bytes.
>>
>> 3. Write new bytes (say 2s) from an offset past the original size of the
>> file, say at offset 20, for 4 bytes. This is supposed to create a "hole"
>> in the file, meaning that the bytes from offset 8 (where it was truncated
>> above) up to the new write at offset 20, should all be 0s (zeros).
>>
>> 4. flush all caches using "echo 3 > /proc/sys/vm/drop_caches" (or unmount
>> and remount) the f/s.
>>
>> 5. Check the content of the file. It is wrong. The 1s that used to be
>> between bytes 9 and 16, before the truncation, have REAPPEARED (they should
>> be 0s).
>>
>> We wrote a script and helper C program to reproduce the bug
>> (reproduce_jffs2_write_begin_issue.sh, write_file.c, and Makefile). We can
>> make them available to anyone.
>>
>> The above example is shown when writing a small file within the same first
>> page. But the bug happens for larger files, as long as steps 1, 2, and 3
>> above all happen within the same page.
>>
>> The problem was traced to the jffs2_write_begin code, where it goes into an
>> 'if' statement intended to handle writes past the current EOF (i.e., writes
>> that may create a hole). The code computes a 'pageofs' that is the floor
>> of the write position (pos), aligned to the page size boundary. In other
>> words, 'pageofs' will never be larger than 'pos'. The code then sets the
>> internal jffs2_raw_inode->isize to the size of max(current inode size,
>> pageofs) but that is wrong: the new file size should be the 'pos', which is
>> larger than both the current inode size and pageofs.
>>
>> Similarly, the code incorrectly sets the internal jffs2_raw_inode->dsize to
>> the difference between the pageofs minus current inode size; instead it
>> should be the current pos minus the current inode size. Finally,
>> inode->i_size was also set incorrectly.
>>
>> The patch below fixes this bug. The bug was discovered using a new tool
>> for finding f/s bugs using model checking, called MCFS (Model Checking File
>> Systems).
>>
>> Signed-off-by: Yifei Liu <yifeliu@...stonybrook.edu>
>> Signed-off-by: Erez Zadok <ezk@...stonybrook.edu>
>> Signed-off-by: Manish Adkar <madkar@...stonybrook.edu>
>> ---
>> fs/jffs2/file.c | 15 +++++++--------
>> 1 file changed, 7 insertions(+), 8 deletions(-)
>>
>> diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
>> index ba86acbe12d3..0479096b96e4 100644
>> --- a/fs/jffs2/file.c
>> +++ b/fs/jffs2/file.c
>> @@ -137,19 +137,18 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
>> struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
>> struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
>> pgoff_t index = pos >> PAGE_SHIFT;
>> - uint32_t pageofs = index << PAGE_SHIFT;
>> int ret = 0;
>>
>> jffs2_dbg(1, "%s()\n", __func__);
>>
>> - if (pageofs > inode->i_size) {
>> - /* Make new hole frag from old EOF to new page */
>> + if (pos > inode->i_size) {
>> + /* Make new hole frag from old EOF to new position */
>> struct jffs2_raw_inode ri;
>> struct jffs2_full_dnode *fn;
>> uint32_t alloc_len;
>>
>> - jffs2_dbg(1, "Writing new hole frag 0x%x-0x%x between current EOF and new page\n",
>> - (unsigned int)inode->i_size, pageofs);
>> + jffs2_dbg(1, "Writing new hole frag 0x%x-0x%x between current EOF and new position\n",
>> + (unsigned int)inode->i_size, (uint32_t)pos);
>>
>> ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
>> ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
>> @@ -169,10 +168,10 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
>> ri.mode = cpu_to_jemode(inode->i_mode);
>> ri.uid = cpu_to_je16(i_uid_read(inode));
>> ri.gid = cpu_to_je16(i_gid_read(inode));
>> - ri.isize = cpu_to_je32(max((uint32_t)inode->i_size, pageofs));
>> + ri.isize = cpu_to_je32((uint32_t)pos);
>> ri.atime = ri.ctime = ri.mtime = cpu_to_je32(JFFS2_NOW());
>> ri.offset = cpu_to_je32(inode->i_size);
>> - ri.dsize = cpu_to_je32(pageofs - inode->i_size);
>> + ri.dsize = cpu_to_je32((uint32_t)pos - inode->i_size);
>> ri.csize = cpu_to_je32(0);
>> ri.compr = JFFS2_COMPR_ZERO;
>> ri.node_crc = cpu_to_je32(crc32(0, &ri, sizeof(ri)-8));
>> @@ -202,7 +201,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
>> goto out_err;
>> }
>> jffs2_complete_reservation(c);
>> - inode->i_size = pageofs;
>> + inode->i_size = pos;
>> mutex_unlock(&f->sem);
>> }
>>
>> --
>> 2.25.1
>>
>>
>> ______________________________________________________
>> Linux MTD discussion mailing list
>> http://lists.infradead.org/mailman/listinfo/linux-mtd/
Powered by blists - more mailing lists