linux-kernel - [PATCH v2 1/2] ARM: dts: stm32: add spi nodes into stm32mp131.dtsi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220725075255.429869-2-alain.volmat@foss.st.com>
Date:   Mon, 25 Jul 2022 09:52:54 +0200
From:   Alain Volmat <alain.volmat@...s.st.com>
To:     <alexandre.torgue@...s.st.com>
CC:     <robh+dt@...nel.org>, <mcoquelin.stm32@...il.com>,
        <krzysztof.kozlowski+dt@...aro.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <amelie.delaunay@...s.st.com>
Subject: [PATCH v2 1/2] ARM: dts: stm32: add spi nodes into stm32mp131.dtsi

Add the 5 instances of spi busses supported by the stm32mp131.

Signed-off-by: Alain Volmat <alain.volmat@...s.st.com>
---
 arch/arm/boot/dts/stm32mp131.dtsi | 70 +++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index da9e8a6ca663..dd35a607073d 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -97,6 +97,34 @@ scmi_shm: scmi-sram@0 {
 			};
 		};
 
+		spi2: spi@...0b000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI2_K>;
+			resets = <&rcc SPI2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 39 0x400 0x01>,
+			       <&dmamux1 40 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi3: spi@...0c000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI3_K>;
+			resets = <&rcc SPI3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 61 0x400 0x01>,
+			       <&dmamux1 62 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		uart4: serial@...10000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
@@ -142,6 +170,20 @@ i2c2: i2c@...13000 {
 			status = "disabled";
 		};
 
+		spi1: spi@...04000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI1_K>;
+			resets = <&rcc SPI1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 37 0x400 0x01>,
+			       <&dmamux1 38 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		dma1: dma-controller@...00000 {
 			compatible = "st,stm32-dma";
 			reg = <0x48000000 0x400>;
@@ -189,6 +231,34 @@ dmamux1: dma-router@...02000 {
 			dma-channels = <16>;
 		};
 
+		spi4: spi@...02000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4c002000 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI4_K>;
+			resets = <&rcc SPI4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 83 0x400 0x01>,
+			       <&dmamux1 84 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi5: spi@...03000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4c003000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI5_K>;
+			resets = <&rcc SPI5_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 85 0x400 0x01>,
+			       <&dmamux1 86 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2c3: i2c@...04000 {
 			compatible = "st,stm32mp13-i2c";
 			reg = <0x4c004000 0x400>;
-- 
2.25.1