[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1658742240.git.rtanwar@maxlinear.com>
Date: Mon, 25 Jul 2022 18:27:26 +0800
From: Rahul Tanwar <rtanwar@...linear.com>
To: <sboyd@...nel.org>, <mturquette@...libre.com>,
<linux-clk@...r.kernel.org>
CC: <linux-kernel@...r.kernel.org>, <linux-lgm-soc@...linear.com>,
"Rahul Tanwar" <rtanwar@...linear.com>
Subject: [PATCH RESEND 0/3] Modify MxL's CGU clk driver to make it secure boot compatible
* Resend due to a mistake in adding --cc while sending patches
MxL's CGU driver was found to be lacking below required features. Add these
required lacking features:
1. Since it is a core driver, it has to conform to secure boot & secure
access architecture. In order for the register accesses to be secure
access compliant, it needs regmap support as per our security architecture.
Hence, replace direct read/writel with regmap based IO. Also remove spinlocks
because they are no longer necessary because regmap uses its own lock.
2. There are some gate clocks which are used by the power mgmt IP to gate when
a certain power saving mode is activated. These gate clocks can also be
gated from CGU clk driver. This creates a conflict. To avoid the conflict,
by default disable gating such gate registers from CGU clk driver. But keep
a flag to do so for other older IP's which uses same CGU clk IP but does not
use same power mgmt IP.
This patch series is based on below git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git
Rahul Tanwar (3):
clk: mxl: Switch from direct readl/writel based IO to regmap based IO
clk: mxl: Remove unnecessary spinlocks
clk: mxl: Avoid disabling gate clocks from clk driver
drivers/clk/x86/Kconfig | 5 +-
drivers/clk/x86/clk-cgu-pll.c | 23 ++-----
drivers/clk/x86/clk-cgu.c | 117 +++++++++++-----------------------
drivers/clk/x86/clk-cgu.h | 45 +++++++------
drivers/clk/x86/clk-lgm.c | 14 ++--
5 files changed, 76 insertions(+), 128 deletions(-)
--
2.17.1
Powered by blists - more mailing lists