| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220725214942.97207-3-f.fainelli@gmail.com>
Date: Mon, 25 Jul 2022 14:49:42 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
linux-kernel@...r.kernel.org (open list)
Subject: [RFC net-next 2/2] net: dsa: bcm_sf2: Have PHYLINK configure CPU/IMP port(s)
Remove the artificial limitations imposed upon
bcm_sf2_sw_mac_link_{up,down} and allow us to override the link
parameters for IMP port(s) as well as regular ports by accounting for
the special differences that exist there.
Remove the code that did override the link parameters in
bcm_sf2_imp_setup().
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/dsa/bcm_sf2.c | 95 ++++++++++++++++++---------------------
1 file changed, 43 insertions(+), 52 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 10de0cffa047..572f7450b527 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -159,7 +159,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
unsigned int i;
- u32 reg, offset;
+ u32 reg;
/* Enable the port memories */
reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
@@ -185,17 +185,6 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
b53_brcm_hdr_setup(ds, port);
if (port == 8) {
- offset = bcm_sf2_port_override_offset(priv, port);
-
- /* Force link status for IMP port */
- reg = core_readl(priv, offset);
- reg |= (MII_SW_OR | LINK_STS);
- if (priv->type == BCM4908_DEVICE_ID)
- reg |= GMII_SPEED_UP_2G;
- else
- reg &= ~GMII_SPEED_UP_2G;
- core_writel(priv, reg, offset);
-
/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
reg = core_readl(priv, CORE_IMP_CTL);
reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
@@ -826,12 +815,10 @@ static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
if (priv->wol_ports_mask & BIT(port))
return;
- if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
- offset = bcm_sf2_port_override_offset(priv, port);
- reg = core_readl(priv, offset);
- reg &= ~LINK_STS;
- core_writel(priv, reg, offset);
- }
+ offset = bcm_sf2_port_override_offset(priv, port);
+ reg = core_readl(priv, offset);
+ reg &= ~LINK_STS;
+ core_writel(priv, reg, offset);
bcm_sf2_sw_mac_link_set(ds, port, interface, false);
}
@@ -845,51 +832,55 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_eee *p = &priv->dev->ports[port].eee;
+ u32 reg_rgmii_ctrl = 0;
+ u32 reg, offset;
bcm_sf2_sw_mac_link_set(ds, port, interface, true);
- if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
- u32 reg_rgmii_ctrl = 0;
- u32 reg, offset;
+ offset = bcm_sf2_port_override_offset(priv, port);
- offset = bcm_sf2_port_override_offset(priv, port);
+ if (phy_interface_mode_is_rgmii(interface) ||
+ interface == PHY_INTERFACE_MODE_MII ||
+ interface == PHY_INTERFACE_MODE_REVMII) {
+ reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+ reg = reg_readl(priv, reg_rgmii_ctrl);
+ reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
- if (interface == PHY_INTERFACE_MODE_RGMII ||
- interface == PHY_INTERFACE_MODE_RGMII_TXID ||
- interface == PHY_INTERFACE_MODE_MII ||
- interface == PHY_INTERFACE_MODE_REVMII) {
- reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
- reg = reg_readl(priv, reg_rgmii_ctrl);
- reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
+ if (tx_pause)
+ reg |= TX_PAUSE_EN;
+ if (rx_pause)
+ reg |= RX_PAUSE_EN;
- if (tx_pause)
- reg |= TX_PAUSE_EN;
- if (rx_pause)
- reg |= RX_PAUSE_EN;
+ reg_writel(priv, reg, reg_rgmii_ctrl);
+ }
- reg_writel(priv, reg, reg_rgmii_ctrl);
- }
+ reg = LINK_STS;
+ if (port == 8) {
+ if (priv->type == BCM4908_DEVICE_ID)
+ reg |= GMII_SPEED_UP_2G;
+ reg |= MII_SW_OR;
+ } else {
+ reg |= SW_OVERRIDE;
+ }
- reg = SW_OVERRIDE | LINK_STS;
- switch (speed) {
- case SPEED_1000:
- reg |= SPDSTS_1000 << SPEED_SHIFT;
- break;
- case SPEED_100:
- reg |= SPDSTS_100 << SPEED_SHIFT;
- break;
- }
+ switch (speed) {
+ case SPEED_1000:
+ reg |= SPDSTS_1000 << SPEED_SHIFT;
+ break;
+ case SPEED_100:
+ reg |= SPDSTS_100 << SPEED_SHIFT;
+ break;
+ }
- if (duplex == DUPLEX_FULL)
- reg |= DUPLX_MODE;
+ if (duplex == DUPLEX_FULL)
+ reg |= DUPLX_MODE;
- if (tx_pause)
- reg |= TXFLOW_CNTL;
- if (rx_pause)
- reg |= RXFLOW_CNTL;
+ if (tx_pause)
+ reg |= TXFLOW_CNTL;
+ if (rx_pause)
+ reg |= RXFLOW_CNTL;
- core_writel(priv, reg, offset);
- }
+ core_writel(priv, reg, offset);
if (mode == MLO_AN_PHY && phydev)
p->eee_enabled = b53_eee_init(ds, port, phydev);
--
2.25.1
Powered by blists - more mailing lists