[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220726033058.403715-1-xji@analogixsemi.com>
Date: Tue, 26 Jul 2022 11:30:58 +0800
From: Xin Ji <xji@...logixsemi.com>
To: Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <narmstrong@...libre.com>,
Robert Foss <robert.foss@...aro.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>
Cc: bliang@...logixsemi.com, qwen@...logixsemi.com,
hsinyi@...omium.org, Xin Ji <xji@...logixsemi.com>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: [PATCH] drm/bridge: anx7625: Support HDMI_I2S audio format
1. Support HDMI_I2S audio format.
2. Return 0 if there is no sink connection in .hw_param callback.
Signed-off-by: Xin Ji <xji@...logixsemi.com>
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 79fc7a50b497..c74b5df4cade 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -1797,8 +1797,13 @@ static int anx7625_audio_hw_params(struct device *dev, void *data,
int wl, ch, rate;
int ret = 0;
- if (fmt->fmt != HDMI_DSP_A) {
- DRM_DEV_ERROR(dev, "only supports DSP_A\n");
+ if (anx7625_sink_detect(ctx) == connector_status_disconnected) {
+ DRM_DEV_DEBUG_DRIVER(dev, "DP not connected\n");
+ return 0;
+ }
+
+ if (fmt->fmt != HDMI_DSP_A && fmt->fmt != HDMI_I2S) {
+ DRM_DEV_ERROR(dev, "only supports DSP_A & I2S\n");
return -EINVAL;
}
@@ -1806,10 +1811,16 @@ static int anx7625_audio_hw_params(struct device *dev, void *data,
params->sample_rate, params->sample_width,
params->cea.channels);
- ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
- AUDIO_CHANNEL_STATUS_6,
- ~I2S_SLAVE_MODE,
- TDM_SLAVE_MODE);
+ if (fmt->fmt == HDMI_DSP_A)
+ ret = anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+ AUDIO_CHANNEL_STATUS_6,
+ ~I2S_SLAVE_MODE,
+ TDM_SLAVE_MODE);
+ else
+ ret = anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+ AUDIO_CHANNEL_STATUS_6,
+ ~TDM_SLAVE_MODE,
+ I2S_SLAVE_MODE);
/* Word length */
switch (params->sample_width) {
--
2.25.1
Powered by blists - more mailing lists