| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220727161022.166458774@linuxfoundation.org>
Date: Wed, 27 Jul 2022 18:11:21 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Dexuan Cui <decui@...rosoft.com>,
Jeffrey Hugo <quic_jhugo@...cinc.com>,
Michael Kelley <mikelley@...rosoft.com>,
Wei Liu <wei.liu@...nel.org>,
Carl Vanderlip <quic_carlv@...cinc.com>
Subject: [PATCH 5.18 017/158] PCI: hv: Fix interrupt mapping for multi-MSI
From: Jeffrey Hugo <quic_jhugo@...cinc.com>
[ upstream change a2bad844a67b1c7740bda63e87453baf63c3a7f7 ]
According to Dexuan, the hypervisor folks beleive that multi-msi
allocations are not correct. compose_msi_msg() will allocate multi-msi
one by one. However, multi-msi is a block of related MSIs, with alignment
requirements. In order for the hypervisor to allocate properly aligned
and consecutive entries in the IOMMU Interrupt Remapping Table, there
should be a single mapping request that requests all of the multi-msi
vectors in one shot.
Dexuan suggests detecting the multi-msi case and composing a single
request related to the first MSI. Then for the other MSIs in the same
block, use the cached information. This appears to be viable, so do it.
Suggested-by: Dexuan Cui <decui@...rosoft.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@...cinc.com>
Reviewed-by: Dexuan Cui <decui@...rosoft.com>
Tested-by: Michael Kelley <mikelley@...rosoft.com>
Link: https://lore.kernel.org/r/1652282599-21643-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@...nel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@...cinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/pci/controller/pci-hyperv.c | 60 ++++++++++++++++++++++++++++++------
1 file changed, 50 insertions(+), 10 deletions(-)
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1518,6 +1518,10 @@ static void hv_int_desc_free(struct hv_p
u8 buffer[sizeof(struct pci_delete_interrupt)];
} ctxt;
+ if (!int_desc->vector_count) {
+ kfree(int_desc);
+ return;
+ }
memset(&ctxt, 0, sizeof(ctxt));
int_pkt = (struct pci_delete_interrupt *)&ctxt.pkt.message;
int_pkt->message_type.type =
@@ -1602,12 +1606,12 @@ static void hv_pci_compose_compl(void *c
static u32 hv_compose_msi_req_v1(
struct pci_create_interrupt *int_pkt, struct cpumask *affinity,
- u32 slot, u8 vector)
+ u32 slot, u8 vector, u8 vector_count)
{
int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE;
int_pkt->wslot.slot = slot;
int_pkt->int_desc.vector = vector;
- int_pkt->int_desc.vector_count = 1;
+ int_pkt->int_desc.vector_count = vector_count;
int_pkt->int_desc.delivery_mode = DELIVERY_MODE;
/*
@@ -1630,14 +1634,14 @@ static int hv_compose_msi_req_get_cpu(st
static u32 hv_compose_msi_req_v2(
struct pci_create_interrupt2 *int_pkt, struct cpumask *affinity,
- u32 slot, u8 vector)
+ u32 slot, u8 vector, u8 vector_count)
{
int cpu;
int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE2;
int_pkt->wslot.slot = slot;
int_pkt->int_desc.vector = vector;
- int_pkt->int_desc.vector_count = 1;
+ int_pkt->int_desc.vector_count = vector_count;
int_pkt->int_desc.delivery_mode = DELIVERY_MODE;
cpu = hv_compose_msi_req_get_cpu(affinity);
int_pkt->int_desc.processor_array[0] =
@@ -1649,7 +1653,7 @@ static u32 hv_compose_msi_req_v2(
static u32 hv_compose_msi_req_v3(
struct pci_create_interrupt3 *int_pkt, struct cpumask *affinity,
- u32 slot, u32 vector)
+ u32 slot, u32 vector, u8 vector_count)
{
int cpu;
@@ -1657,7 +1661,7 @@ static u32 hv_compose_msi_req_v3(
int_pkt->wslot.slot = slot;
int_pkt->int_desc.vector = vector;
int_pkt->int_desc.reserved = 0;
- int_pkt->int_desc.vector_count = 1;
+ int_pkt->int_desc.vector_count = vector_count;
int_pkt->int_desc.delivery_mode = DELIVERY_MODE;
cpu = hv_compose_msi_req_get_cpu(affinity);
int_pkt->int_desc.processor_array[0] =
@@ -1688,6 +1692,8 @@ static void hv_compose_msi_msg(struct ir
struct cpumask *dest;
struct compose_comp_ctxt comp;
struct tran_int_desc *int_desc;
+ struct msi_desc *msi_desc;
+ u8 vector, vector_count;
struct {
struct pci_packet pci_pkt;
union {
@@ -1709,7 +1715,8 @@ static void hv_compose_msi_msg(struct ir
return;
}
- pdev = msi_desc_to_pci_dev(irq_data_get_msi_desc(data));
+ msi_desc = irq_data_get_msi_desc(data);
+ pdev = msi_desc_to_pci_dev(msi_desc);
dest = irq_data_get_effective_affinity_mask(data);
pbus = pdev->bus;
hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
@@ -1722,6 +1729,36 @@ static void hv_compose_msi_msg(struct ir
if (!int_desc)
goto drop_reference;
+ if (!msi_desc->pci.msi_attrib.is_msix && msi_desc->nvec_used > 1) {
+ /*
+ * If this is not the first MSI of Multi MSI, we already have
+ * a mapping. Can exit early.
+ */
+ if (msi_desc->irq != data->irq) {
+ data->chip_data = int_desc;
+ int_desc->address = msi_desc->msg.address_lo |
+ (u64)msi_desc->msg.address_hi << 32;
+ int_desc->data = msi_desc->msg.data +
+ (data->irq - msi_desc->irq);
+ msg->address_hi = msi_desc->msg.address_hi;
+ msg->address_lo = msi_desc->msg.address_lo;
+ msg->data = int_desc->data;
+ put_pcichild(hpdev);
+ return;
+ }
+ /*
+ * The vector we select here is a dummy value. The correct
+ * value gets sent to the hypervisor in unmask(). This needs
+ * to be aligned with the count, and also not zero. Multi-msi
+ * is powers of 2 up to 32, so 32 will always work here.
+ */
+ vector = 32;
+ vector_count = msi_desc->nvec_used;
+ } else {
+ vector = hv_msi_get_int_vector(data);
+ vector_count = 1;
+ }
+
memset(&ctxt, 0, sizeof(ctxt));
init_completion(&comp.comp_pkt.host_event);
ctxt.pci_pkt.completion_func = hv_pci_compose_compl;
@@ -1732,7 +1769,8 @@ static void hv_compose_msi_msg(struct ir
size = hv_compose_msi_req_v1(&ctxt.int_pkts.v1,
dest,
hpdev->desc.win_slot.slot,
- hv_msi_get_int_vector(data));
+ vector,
+ vector_count);
break;
case PCI_PROTOCOL_VERSION_1_2:
@@ -1740,14 +1778,16 @@ static void hv_compose_msi_msg(struct ir
size = hv_compose_msi_req_v2(&ctxt.int_pkts.v2,
dest,
hpdev->desc.win_slot.slot,
- hv_msi_get_int_vector(data));
+ vector,
+ vector_count);
break;
case PCI_PROTOCOL_VERSION_1_4:
size = hv_compose_msi_req_v3(&ctxt.int_pkts.v3,
dest,
hpdev->desc.win_slot.slot,
- hv_msi_get_int_vector(data));
+ vector,
+ vector_count);
break;
default:
Powered by blists - more mailing lists