[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220727161025.300630697@linuxfoundation.org>
Date: Wed, 27 Jul 2022 18:12:40 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Haibo Chen <haibo.chen@....com>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Bartosz Golaszewski <brgl@...ev.pl>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.18 096/158] gpio: pca953x: use the correct range when do regmap sync
From: Haibo Chen <haibo.chen@....com>
[ Upstream commit 2abc17a93867dc816f0ed9d32021dda8078e7330 ]
regmap will sync a range of registers, here use the correct range
to make sure the sync do not touch other unexpected registers.
Find on pca9557pw on imx8qxp/dxl evk board, this device support
8 pin, so only need one register(8 bits) to cover all the 8 pins's
property setting. But when sync the output, we find it actually
update two registers, output register and the following register.
Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Fixes: ec82d1eba346 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@....com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
Signed-off-by: Bartosz Golaszewski <brgl@...ev.pl>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/gpio/gpio-pca953x.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index f334c8556a22..60b7616dd4aa 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -900,12 +900,12 @@ static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
int ret;
ret = regcache_sync_region(chip->regmap, chip->regs->output,
- chip->regs->output + NBANK(chip));
+ chip->regs->output + NBANK(chip) - 1);
if (ret)
goto out;
ret = regcache_sync_region(chip->regmap, chip->regs->direction,
- chip->regs->direction + NBANK(chip));
+ chip->regs->direction + NBANK(chip) - 1);
if (ret)
goto out;
@@ -1118,14 +1118,14 @@ static int pca953x_regcache_sync(struct device *dev)
* sync these registers first and only then sync the rest.
*/
regaddr = pca953x_recalc_addr(chip, chip->regs->direction, 0);
- ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip));
+ ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
if (ret) {
dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
return ret;
}
regaddr = pca953x_recalc_addr(chip, chip->regs->output, 0);
- ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip));
+ ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
if (ret) {
dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
return ret;
@@ -1135,7 +1135,7 @@ static int pca953x_regcache_sync(struct device *dev)
if (chip->driver_data & PCA_PCAL) {
regaddr = pca953x_recalc_addr(chip, PCAL953X_IN_LATCH, 0);
ret = regcache_sync_region(chip->regmap, regaddr,
- regaddr + NBANK(chip));
+ regaddr + NBANK(chip) - 1);
if (ret) {
dev_err(dev, "Failed to sync INT latch registers: %d\n",
ret);
@@ -1144,7 +1144,7 @@ static int pca953x_regcache_sync(struct device *dev)
regaddr = pca953x_recalc_addr(chip, PCAL953X_INT_MASK, 0);
ret = regcache_sync_region(chip->regmap, regaddr,
- regaddr + NBANK(chip));
+ regaddr + NBANK(chip) - 1);
if (ret) {
dev_err(dev, "Failed to sync INT mask registers: %d\n",
ret);
--
2.35.1
Powered by blists - more mailing lists