linux-kernel - Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220727192839.707a3453.max@enpas.org>
Date:   Wed, 27 Jul 2022 19:28:39 +0200
From:   Max Staudt <max@...as.org>
To:     Marc Kleine-Budde <mkl@...gutronix.de>,
        Dario Binacchi <dario.binacchi@...rulasolutions.com>
Cc:     linux-kernel@...r.kernel.org, linux-can@...r.kernel.org,
        Oliver Hartkopp <socketcan@...tkopp.net>,
        michael@...rulasolutions.com,
        Amarula patchwork <linux-amarula@...rulasolutions.com>,
        Jeroen Hofstee <jhofstee@...tronenergy.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Wolfgang Grandegger <wg@...ndegger.com>, netdev@...r.kernel.org
Subject: Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time
 register (btr)

On Wed, 27 Jul 2022 13:30:54 +0200
Marc Kleine-Budde <mkl@...gutronix.de> wrote:

> As far as I understand, setting the btr is an alternative way to set the
> bitrate, right? I don't like the idea of poking arbitrary values into a
> hardware from user space.

I agree with Marc here.

This is a modification across the whole stack, specific to a single
device, when there are ways around.


If I understand correctly, the CAN232 "S" command sets one of the fixed
bitrates, whereas "s" sets the two BTR registers. Now the question is,
what do BTR0/BTR1 mean, and what are they? If they are merely a divider
in a CAN controller's master clock, like in ELM327, then you could

  a) Calculate the BTR values from the bitrate userspace requests, or

  b) pre-calculate a huge table of possible bitrates and present them
     all to userspace. Sounds horrible, but that's what I did in can327,
     haha. Maybe I should have reigned them in a little, to the most
     useful values.

  c) just limit the bitrates to whatever seems most useful (like the
     "S" command's table), and let users complain if they really need
     something else. In the meantime, they are still free to slcand or
     minicom to their heart's content before attaching slcan, thanks to
     your backwards compatibility efforts.


In short, to me, this isn't a deal breaker for your patch series.


Max