| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220727210253.3794069-11-daniel.lezcano@linexp.org>
Date: Wed, 27 Jul 2022 23:02:31 +0200
From: Daniel Lezcano <daniel.lezcano@...exp.org>
To: daniel.lezcano@...aro.org, rafael@...nel.org
Cc: rui.zhang@...el.com, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, khilman@...libre.com,
abailon@...libre.com, lukasz.luba@....com, broonie@...nel.org,
damien.lemoal@...nsource.wdc.com, heiko@...ech.de,
hayashi.kunihiko@...ionext.com, mhiramat@...nel.org,
talel@...zon.com, thierry.reding@...il.com, digetx@...il.com,
jonathanh@...dia.com, anarsoul@...il.com, tiny.windzz@...il.com,
baolin.wang7@...il.com, f.fainelli@...il.com,
bjorn.andersson@...aro.org, mcoquelin.stm32@...il.com,
glaroque@...libre.com, miquel.raynal@...tlin.com,
shawnguo@...nel.org, niklas.soderlund@...natech.se,
matthias.bgg@...il.com, j-keerthy@...com,
Amit Kucheria <amitk@...nel.org>,
Nicolas Saenz Julienne <nsaenz@...nel.org>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Markus Mayer <mmayer@...adcom.com>,
Stefan Wahren <stefan.wahren@...e.com>,
Zheng Yongjun <zhengyongjun3@...wei.com>,
linux-rpi-kernel@...ts.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE)
Subject: [PATCH v3 10/32] thermal/drivers/broadcom: Switch to new of API
The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.
Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.
Signed-off-by: Daniel Lezcano <daniel.lezcano@...exp.org>
Tested-by: Florian Fainelli <f.fainelli@...il.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/thermal/broadcom/bcm2711_thermal.c | 14 +++---
drivers/thermal/broadcom/bcm2835_thermal.c | 14 +++---
drivers/thermal/broadcom/brcmstb_thermal.c | 20 ++++-----
drivers/thermal/broadcom/ns-thermal.c | 50 +++++++++-------------
drivers/thermal/broadcom/sr-thermal.c | 16 +++----
5 files changed, 53 insertions(+), 61 deletions(-)
diff --git a/drivers/thermal/broadcom/bcm2711_thermal.c b/drivers/thermal/broadcom/bcm2711_thermal.c
index e9bef5c3414b..1f8651d15160 100644
--- a/drivers/thermal/broadcom/bcm2711_thermal.c
+++ b/drivers/thermal/broadcom/bcm2711_thermal.c
@@ -31,11 +31,11 @@ struct bcm2711_thermal_priv {
struct thermal_zone_device *thermal;
};
-static int bcm2711_get_temp(void *data, int *temp)
+static int bcm2711_get_temp(struct thermal_zone_device *tz, int *temp)
{
- struct bcm2711_thermal_priv *priv = data;
- int slope = thermal_zone_get_slope(priv->thermal);
- int offset = thermal_zone_get_offset(priv->thermal);
+ struct bcm2711_thermal_priv *priv = tz->devdata;
+ int slope = thermal_zone_get_slope(tz);
+ int offset = thermal_zone_get_offset(tz);
u32 val;
int ret;
@@ -54,7 +54,7 @@ static int bcm2711_get_temp(void *data, int *temp)
return 0;
}
-static const struct thermal_zone_of_device_ops bcm2711_thermal_of_ops = {
+static const struct thermal_zone_device_ops bcm2711_thermal_of_ops = {
.get_temp = bcm2711_get_temp,
};
@@ -88,8 +88,8 @@ static int bcm2711_thermal_probe(struct platform_device *pdev)
}
priv->regmap = regmap;
- thermal = devm_thermal_zone_of_sensor_register(dev, 0, priv,
- &bcm2711_thermal_of_ops);
+ thermal = devm_thermal_of_zone_register(dev, 0, priv,
+ &bcm2711_thermal_of_ops);
if (IS_ERR(thermal)) {
ret = PTR_ERR(thermal);
dev_err(dev, "could not register sensor: %d\n", ret);
diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index c8e4344d5a3d..2c67841a1115 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -88,9 +88,9 @@ static int bcm2835_thermal_temp2adc(int temp, int offset, int slope)
return temp;
}
-static int bcm2835_thermal_get_temp(void *d, int *temp)
+static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
{
- struct bcm2835_thermal_data *data = d;
+ struct bcm2835_thermal_data *data = tz->devdata;
u32 val = readl(data->regs + BCM2835_TS_TSENSSTAT);
if (!(val & BCM2835_TS_TSENSSTAT_VALID))
@@ -135,7 +135,7 @@ static void bcm2835_thermal_debugfs(struct platform_device *pdev)
debugfs_create_regset32("regset", 0444, data->debugfsdir, regset);
}
-static const struct thermal_zone_of_device_ops bcm2835_thermal_ops = {
+static const struct thermal_zone_device_ops bcm2835_thermal_ops = {
.get_temp = bcm2835_thermal_get_temp,
};
@@ -206,8 +206,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
data->clk, rate);
/* register of thermal sensor and get info from DT */
- tz = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
- &bcm2835_thermal_ops);
+ tz = devm_thermal_of_zone_register(&pdev->dev, 0, data,
+ &bcm2835_thermal_ops);
if (IS_ERR(tz)) {
err = PTR_ERR(tz);
dev_err(&pdev->dev,
@@ -277,7 +277,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
return 0;
err_tz:
- thermal_zone_of_sensor_unregister(&pdev->dev, tz);
+ thermal_of_zone_unregister(tz);
err_clk:
clk_disable_unprepare(data->clk);
@@ -290,7 +290,7 @@ static int bcm2835_thermal_remove(struct platform_device *pdev)
struct thermal_zone_device *tz = data->tz;
debugfs_remove_recursive(data->debugfsdir);
- thermal_zone_of_sensor_unregister(&pdev->dev, tz);
+ thermal_of_zone_unregister(tz);
clk_disable_unprepare(data->clk);
return 0;
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 0cedb8b4f00a..c79c6cfdd74d 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -105,7 +105,7 @@ static struct avs_tmon_trip avs_tmon_trips[] = {
struct brcmstb_thermal_params {
unsigned int offset;
unsigned int mult;
- const struct thermal_zone_of_device_ops *of_ops;
+ const struct thermal_zone_device_ops *of_ops;
};
struct brcmstb_thermal_priv {
@@ -150,9 +150,9 @@ static inline u32 avs_tmon_temp_to_code(struct brcmstb_thermal_priv *priv,
return (u32)((offset - temp) / mult);
}
-static int brcmstb_get_temp(void *data, int *temp)
+static int brcmstb_get_temp(struct thermal_zone_device *tz, int *temp)
{
- struct brcmstb_thermal_priv *priv = data;
+ struct brcmstb_thermal_priv *priv = tz->devdata;
u32 val;
long t;
@@ -260,9 +260,9 @@ static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
return IRQ_HANDLED;
}
-static int brcmstb_set_trips(void *data, int low, int high)
+static int brcmstb_set_trips(struct thermal_zone_device *tz, int low, int high)
{
- struct brcmstb_thermal_priv *priv = data;
+ struct brcmstb_thermal_priv *priv = tz->devdata;
dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
@@ -288,7 +288,7 @@ static int brcmstb_set_trips(void *data, int low, int high)
return 0;
}
-static const struct thermal_zone_of_device_ops brcmstb_16nm_of_ops = {
+static const struct thermal_zone_device_ops brcmstb_16nm_of_ops = {
.get_temp = brcmstb_get_temp,
};
@@ -298,7 +298,7 @@ static const struct brcmstb_thermal_params brcmstb_16nm_params = {
.of_ops = &brcmstb_16nm_of_ops,
};
-static const struct thermal_zone_of_device_ops brcmstb_28nm_of_ops = {
+static const struct thermal_zone_device_ops brcmstb_28nm_of_ops = {
.get_temp = brcmstb_get_temp,
.set_trips = brcmstb_set_trips,
};
@@ -318,7 +318,7 @@ MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
static int brcmstb_thermal_probe(struct platform_device *pdev)
{
- const struct thermal_zone_of_device_ops *of_ops;
+ const struct thermal_zone_device_ops *of_ops;
struct thermal_zone_device *thermal;
struct brcmstb_thermal_priv *priv;
struct resource *res;
@@ -341,8 +341,8 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
of_ops = priv->temp_params->of_ops;
- thermal = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
- of_ops);
+ thermal = devm_thermal_of_zone_register(&pdev->dev, 0, priv,
+ of_ops);
if (IS_ERR(thermal)) {
ret = PTR_ERR(thermal);
dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
diff --git a/drivers/thermal/broadcom/ns-thermal.c b/drivers/thermal/broadcom/ns-thermal.c
index c9468ba9d449..07a8a3f49bd0 100644
--- a/drivers/thermal/broadcom/ns-thermal.c
+++ b/drivers/thermal/broadcom/ns-thermal.c
@@ -14,19 +14,14 @@
#define PVTMON_CONTROL0_SEL_TEST_MODE 0x0000000e
#define PVTMON_STATUS 0x08
-struct ns_thermal {
- struct thermal_zone_device *tz;
- void __iomem *pvtmon;
-};
-
-static int ns_thermal_get_temp(void *data, int *temp)
+static int ns_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
{
- struct ns_thermal *ns_thermal = data;
- int offset = thermal_zone_get_offset(ns_thermal->tz);
- int slope = thermal_zone_get_slope(ns_thermal->tz);
+ void __iomem *pvtmon = tz->devdata;
+ int offset = thermal_zone_get_offset(tz);
+ int slope = thermal_zone_get_slope(tz);
u32 val;
- val = readl(ns_thermal->pvtmon + PVTMON_CONTROL0);
+ val = readl(pvtmon + PVTMON_CONTROL0);
if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) {
/* Clear current mode selection */
val &= ~PVTMON_CONTROL0_SEL_MASK;
@@ -34,50 +29,47 @@ static int ns_thermal_get_temp(void *data, int *temp)
/* Set temp monitor mode (it's the default actually) */
val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR;
- writel(val, ns_thermal->pvtmon + PVTMON_CONTROL0);
+ writel(val, pvtmon + PVTMON_CONTROL0);
}
- val = readl(ns_thermal->pvtmon + PVTMON_STATUS);
+ val = readl(pvtmon + PVTMON_STATUS);
*temp = slope * val + offset;
return 0;
}
-static const struct thermal_zone_of_device_ops ns_thermal_ops = {
+static const struct thermal_zone_device_ops ns_thermal_ops = {
.get_temp = ns_thermal_get_temp,
};
static int ns_thermal_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ns_thermal *ns_thermal;
-
- ns_thermal = devm_kzalloc(dev, sizeof(*ns_thermal), GFP_KERNEL);
- if (!ns_thermal)
- return -ENOMEM;
+ struct thermal_zone_device *tz;
+ void __iomem *pvtmon;
- ns_thermal->pvtmon = of_iomap(dev_of_node(dev), 0);
- if (WARN_ON(!ns_thermal->pvtmon))
+ pvtmon = of_iomap(dev_of_node(dev), 0);
+ if (WARN_ON(!pvtmon))
return -ENOENT;
- ns_thermal->tz = devm_thermal_zone_of_sensor_register(dev, 0,
- ns_thermal,
- &ns_thermal_ops);
- if (IS_ERR(ns_thermal->tz)) {
- iounmap(ns_thermal->pvtmon);
- return PTR_ERR(ns_thermal->tz);
+ tz = devm_thermal_of_zone_register(dev, 0,
+ pvtmon,
+ &ns_thermal_ops);
+ if (IS_ERR(tz)) {
+ iounmap(pvtmon);
+ return PTR_ERR(tz);
}
- platform_set_drvdata(pdev, ns_thermal);
+ platform_set_drvdata(pdev, pvtmon);
return 0;
}
static int ns_thermal_remove(struct platform_device *pdev)
{
- struct ns_thermal *ns_thermal = platform_get_drvdata(pdev);
+ void __iomem *pvtmon = platform_get_drvdata(pdev);
- iounmap(ns_thermal->pvtmon);
+ iounmap(pvtmon);
return 0;
}
diff --git a/drivers/thermal/broadcom/sr-thermal.c b/drivers/thermal/broadcom/sr-thermal.c
index 85ab9edd580c..2b93502543ff 100644
--- a/drivers/thermal/broadcom/sr-thermal.c
+++ b/drivers/thermal/broadcom/sr-thermal.c
@@ -19,7 +19,6 @@
#define SR_TMON_MAX_LIST 6
struct sr_tmon {
- struct thermal_zone_device *tz;
unsigned int crit_temp;
unsigned int tmon_id;
struct sr_thermal *priv;
@@ -31,9 +30,9 @@ struct sr_thermal {
struct sr_tmon tmon[SR_TMON_MAX_LIST];
};
-static int sr_get_temp(void *data, int *temp)
+static int sr_get_temp(struct thermal_zone_device *tz, int *temp)
{
- struct sr_tmon *tmon = data;
+ struct sr_tmon *tmon = tz->devdata;
struct sr_thermal *sr_thermal = tmon->priv;
*temp = readl(sr_thermal->regs + SR_TMON_TEMP_BASE(tmon->tmon_id));
@@ -41,13 +40,14 @@ static int sr_get_temp(void *data, int *temp)
return 0;
}
-static const struct thermal_zone_of_device_ops sr_tz_ops = {
+static const struct thermal_zone_device_ops sr_tz_ops = {
.get_temp = sr_get_temp,
};
static int sr_thermal_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct thermal_zone_device *tz;
struct sr_thermal *sr_thermal;
struct sr_tmon *tmon;
struct resource *res;
@@ -84,10 +84,10 @@ static int sr_thermal_probe(struct platform_device *pdev)
writel(0, sr_thermal->regs + SR_TMON_TEMP_BASE(i));
tmon->tmon_id = i;
tmon->priv = sr_thermal;
- tmon->tz = devm_thermal_zone_of_sensor_register(dev, i, tmon,
- &sr_tz_ops);
- if (IS_ERR(tmon->tz))
- return PTR_ERR(tmon->tz);
+ tz = devm_thermal_of_zone_register(dev, i, tmon,
+ &sr_tz_ops);
+ if (IS_ERR(tz))
+ return PTR_ERR(tz);
dev_dbg(dev, "thermal sensor %d registered\n", i);
}
--
2.25.1
Powered by blists - more mailing lists