linux-kernel - Re: [PATCH V2 1/1] mmc: sdhci-pci-o2micro: fix some SD cards compatibility issue at DDR50 mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ec9422fa-664b-3c40-f5d5-283bca81f099@intel.com>
Date:   Fri, 29 Jul 2022 13:21:11 +0300
From:   Adrian Hunter <adrian.hunter@...el.com>
To:     Chevron Li <chevron.li@...hubtech.com>, ulf.hansson@...aro.org,
        linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     shaper.liu@...hubtech.com, shirley.her@...hubtech.com,
        xiaoguang.yu@...hubtech.com
Subject: Re: [PATCH V2 1/1] mmc: sdhci-pci-o2micro: fix some SD cards
 compatibility issue at DDR50 mode

On 29/07/22 13:05, Chevron Li wrote:
> Bayhub chips have better compatibility support for SDR50 than DDR50
> and both mode have the same R/W performance when clock frequency >= 100MHz.
> Disable DDR50 mode and use SDR50 instead.
> 
> Signed-off-by: Chevron Li <chevron.li@...hubtech.com>

Acked-by: Adrian Hunter <adrian.hunter@...el.com>

> ---
> Changes on V1:
> 1.Set quirks2 flag SDHCI_QUIRK2_BROKEN_DDR50 for bayhub chips.
> 2.Use bayhub hardware input tuning for SDR50 mode instead of standard tuning flow.
> 
> Changes on V2:
> Update commit format and information.
> ---
>  drivers/mmc/host/sdhci-pci-o2micro.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index 0d4d343dbb77..ad457cd9cbaa 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -317,11 +317,12 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
>  	u32 reg_val;
>  
>  	/*
> -	 * This handler only implements the eMMC tuning that is specific to
> +	 * This handler implements the hardware tuning that is specific to
>  	 * this controller.  Fall back to the standard method for other TIMING.
>  	 */
>  	if ((host->timing != MMC_TIMING_MMC_HS200) &&
> -		(host->timing != MMC_TIMING_UHS_SDR104))
> +		(host->timing != MMC_TIMING_UHS_SDR104) &&
> +		(host->timing != MMC_TIMING_UHS_SDR50))
>  		return sdhci_execute_tuning(mmc, opcode);
>  
>  	if (WARN_ON((opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
> @@ -631,6 +632,8 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
>  		if (reg & 0x1)
>  			host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
>  
> +		host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
> +
>  		sdhci_pci_o2_enable_msi(chip, host);
>  
>  		if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
> 
> base-commit: 68e77ffbfd06ae3ef8f2abf1c3b971383c866983