| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220802081903.384867-1-michael@amarulasolutions.com>
Date: Tue, 2 Aug 2022 10:19:02 +0200
From: Michael Trimarchi <michael@...rulasolutions.com>
To: Minas Harutyunyan <hminas@...opsys.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-usb@...r.kernel.org (open list:DESIGNWARE USB2 DRD IP DRIVER),
linux-kernel@...r.kernel.org (open list)
Cc: linux-usb@...r.kernel.org (open list:DESIGNWARE USB2 DRD IP DRIVER),
linux-kernel@...r.kernel.org (open list)
Subject: [RFC PATCH] usb: dwc2: Call core_init after disconnect
Call dwc2_hsotg_core_init_disconnected in order to restart
the gadget device session, otherwise the device will remain
in unconsistent state. I have tested on 4.4 kernel but I did
not find any reason how should work now. Basically what happen
is the ep0 has a startup request enqueue but the connected state
is not still get. The session End Detected does not kill any pending
urb so, the complete for the urb was not delivered, the core is not
able to complete the setup because urb is on the queue, and the
core is unable to restart.
Testing was done on PX30 cpu with g_multi gadget (enable ethernet, usb
storage)
[46250.026071] dwc2 ff300000.usb: gintsts=0400802c gintmsk=d0bc3cc4
[46250.026114] dwc2 ff300000.usb: ++OTG Interrupt gotgint=4 [b_peripheral]
[46250.026142] dwc2 ff300000.usb: ++OTG Interrupt: Session End Detected++ (b_peripheral)
[46250.026159] call disconnect
[46250.026197] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008028 00000000 (d0bc3cc4) retry 8
[46253.391509] dwc2 ff300000.usb: gintsts=44008028 gintmsk=d0bc3cc4
[46253.391551] dwc2 ff300000.usb: Session request interrupt - lx_state=0
[46253.391595] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008028 00000000 (d0bc3cc4) retry 8
[46253.406548] dwc2 ff300000.usb: dwc2_hsotg_irq: 04809028 00801000 (d0bc3cc4) retry 8
[46253.406587] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRstDet
[46253.406616] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRst
[46253.406642] dwc2 ff300000.usb: GNPTXSTS=00080010
[46253.409549] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008428 00000400 (d0bc3cc4) retry 8
[46253.409585] dwc2 ff300000.usb: GINTSTS_ErlySusp
[46253.412604] dwc2 ff300000.usb: gintsts=04008828 gintmsk=d0bc3cc4
[46253.412641] dwc2 ff300000.usb: USB SUSPEND
[46253.412668] dwc2 ff300000.usb: DSTS=0x31103
[46253.412696] dwc2 ff300000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=1
[46253.412722] dwc2 ff300000.usb: ignore suspend request before enumeration
[46253.412757] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008028 00000000 (d0bc3cc4) retry 8
[46253.612215] phy phy-ff2c0000.syscon:usb2-phy@....0: charger = USB_SDP_CHARGER
[46253.615388] dwc2 ff300000.usb: dwc2_hsotg_irq: 0400a028 00002000 (d0bc3cc4) retry 8
[46253.615428] dwc2 ff300000.usb: EnumDone (DSTS=0x00431102)
[46253.615456] dwc2 ff300000.usb: new device is full-speed
[46253.615492] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup: queueing setup request
[46253.615518] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup already queued???
[46253.615547] dwc2 ff300000.usb: EP0: DIEPCTL0=0x00028000, DOEPCTL0=0x80028000
[46253.617420] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008428 00000400 (d0bc3cc4) retry 8
[46253.617456] dwc2 ff300000.usb: GINTSTS_ErlySusp
[46253.620472] dwc2 ff300000.usb: gintsts=04008828 gintmsk=d0bc3cc4
[46253.620508] dwc2 ff300000.usb: USB SUSPEND
[46253.620535] dwc2 ff300000.usb: DSTS=0x431103
[46253.620563] dwc2 ff300000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=1
[46253.620589] dwc2 ff300000.usb: ignore suspend request before enumeration
[46253.620624] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008028 00000000 (d0bc3cc4) retry 8
[46253.757245] dwc2 ff300000.usb: dwc2_hsotg_irq: 04809028 00801000 (d0bc3cc4) retry 8
[46253.757285] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRstDet
[46253.757312] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRst
[46253.757338] dwc2 ff300000.usb: GNPTXSTS=00080010
[46253.814352] dwc2 ff300000.usb: dwc2_hsotg_irq: 0400a028 00002000 (d0bc3cc4) retry 8
[46253.814395] dwc2 ff300000.usb: EnumDone (DSTS=0x00188800)
[46253.814421] dwc2 ff300000.usb: new device is high-speed
[46253.814456] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup: queueing setup request
[46253.814483] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup already queued???
[46253.814512] dwc2 ff300000.usb: EP0: DIEPCTL0=0x00028000, DOEPCTL0=0x80028000
[46253.885421] dwc2 ff300000.usb: dwc2_hsotg_irq: 04088028 00080000 (d0bc3cc4) retry 8
[46253.885463] dwc2 ff300000.usb: dwc2_hsotg_irq: daint=00010000
[46253.885496] dwc2 ff300000.usb: dwc2_hsotg_epint: ep0(out) DxEPINT=0x00008001
[46259.108181] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008428 00000400 (d0bc3cc4) retry 8
[46259.108221] dwc2 ff300000.usb: GINTSTS_ErlySusp
[46259.108600] dwc2 ff300000.usb: dwc2_hsotg_irq: 04009028 00001000 (d0bc3cc4) retry 8
[46259.108632] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRst
[46259.108659] dwc2 ff300000.usb: GNPTXSTS=00080010
[46259.162264] dwc2 ff300000.usb: dwc2_hsotg_irq: 0400a028 00002000 (d0bc3cc4) retry 8
[46259.162304] dwc2 ff300000.usb: EnumDone (DSTS=0x000b1800)
[46259.162332] dwc2 ff300000.usb: new device is high-speed
[46259.162367] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup: queueing setup request
[46259.162393] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup already queued???
[46259.162423] dwc2 ff300000.usb: EP0: DIEPCTL0=0x00028000, DOEPCTL0=0x80028000
[46259.344960] dwc2 ff300000.usb: dwc2_hsotg_irq: 04088028 00080000 (d0bc3cc4) retry 8
[46259.345002] dwc2 ff300000.usb: dwc2_hsotg_irq: daint=00010000
[46259.345036] dwc2 ff300000.usb: dwc2_hsotg_epint: ep0(out) DxEPINT=0x00008001
[46264.481549] dwc2 ff300000.usb: dwc2_hsotg_irq: 04088028 00080000 (d0bc3cc4) retry 8
[46264.481592] dwc2 ff300000.usb: dwc2_hsotg_irq: daint=00010000
[46264.481625] dwc2 ff300000.usb: dwc2_hsotg_epint: ep0(out) DxEPINT=0x00008001
[46269.605279] dwc2 ff300000.usb: dwc2_hsotg_irq: 04088028 00080000 (d0bc3cc4) retry 8
[46269.605322] dwc2 ff300000.usb: dwc2_hsotg_irq: daint=00010000
[46269.605356] dwc2 ff300000.usb: dwc2_hsotg_epint: ep0(out) DxEPINT=0x00008001
[46274.724165] dwc2 ff300000.usb: dwc2_hsotg_irq: 04008428 00000400 (d0bc3cc4) retry 8
[46274.724205] dwc2 ff300000.usb: GINTSTS_ErlySusp
[46274.724574] dwc2 ff300000.usb: dwc2_hsotg_irq: 04009028 00001000 (d0bc3cc4) retry 8
[46274.724606] dwc2 ff300000.usb: dwc2_hsotg_irq: USBRst
[46274.724632] dwc2 ff300000.usb: GNPTXSTS=00080010
[46274.778137] dwc2 ff300000.usb: dwc2_hsotg_irq: 0400a028 00002000 (d0bc3cc4) retry 8
[46274.778179] dwc2 ff300000.usb: EnumDone (DSTS=0x00331800)
[46274.778207] dwc2 ff300000.usb: new device is high-speed
[46274.778242] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup: queueing setup request
[46274.778268] dwc2 ff300000.usb: dwc2_hsotg_enqueue_setup already queued???
[46274.778297] dwc2 ff300000.usb: EP0: DIEPCTL0=0x00028000, DOEPCTL0=0x80028000
Signed-off-by: Michael Trimarchi <michael@...rulasolutions.com>
---
drivers/usb/dwc2/gadget.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index fe2a58c75861..4c1e10a62bde 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3732,7 +3732,6 @@ static irqreturn_t dwc2_hsotg_irq(int irq, void *pw)
if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) {
u32 usb_status = dwc2_readl(hsotg, GOTGCTL);
- u32 connected = hsotg->connected;
dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
@@ -3746,7 +3745,7 @@ static irqreturn_t dwc2_hsotg_irq(int irq, void *pw)
/* Reset device address to zero */
dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK);
- if (usb_status & GOTGCTL_BSESVLD && connected)
+ if (usb_status & GOTGCTL_BSESVLD)
dwc2_hsotg_core_init_disconnected(hsotg, true);
}
--
2.34.1
Powered by blists - more mailing lists