| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220803094801.177490-1-p.raghav@samsung.com>
Date: Wed, 3 Aug 2022 11:47:48 +0200
From: Pankaj Raghav <p.raghav@...sung.com>
To: Johannes.Thumshirn@....com, snitzer@...nel.org, axboe@...nel.dk,
damien.lemoal@...nsource.wdc.com, agk@...hat.com, hch@....de
Cc: dm-devel@...hat.com, matias.bjorling@....com, gost.dev@...sung.com,
linux-kernel@...r.kernel.org, pankydev8@...il.com,
jaegeuk@...nel.org, hare@...e.de, linux-block@...r.kernel.org,
linux-nvme@...ts.infradead.org, bvanassche@....org,
Pankaj Raghav <p.raghav@...sung.com>
Subject: [PATCH v9 00/13] support zoned block devices with non-power-of-2
zone sizes
- Background and Motivation:
The zone storage implementation in Linux, introduced since v4.10, first
targetted SMR drives which have a power of 2 (po2) zone size alignment
requirement. The po2 zone size was further imposed implicitly by the
block layer's blk_queue_chunk_sectors(), used to prevent IO merging
across chunks beyond the specified size, since v3.16 through commit
762380ad9322 ("block: add notion of a chunk size for request merging").
But this same general block layer po2 requirement for blk_queue_chunk_sectors()
was removed on v5.10 through commit 07d098e6bbad ("block: allow 'chunk_sectors'
to be non-power-of-2").
NAND, which is the media used in newer zoned storage devices, does not
naturally align to po2. In these devices, zone capacity(cap) is not the
same as the po2 zone size. When the zone cap != zone size, then unmapped
LBAs are introduced to cover the space between the zone cap and zone size.
po2 requirement does not make sense for these type of zone storage devices.
This patch series aims to remove these unmapped LBAs for zoned devices when
zone cap is npo2. This is done by relaxing the po2 zone size constraint
in the kernel and allowing zoned device with npo2 zone sizes if zone cap
== zone size.
Removing the po2 requirement from zone storage should be possible
now provided that no userspace regression and no performance regressions are
introduced. Stop-gap patches have been already merged into f2fs-tools to
proactively not allow npo2 zone sizes until proper support is added [1].
There were two efforts previously to add support to npo2 devices: 1) via
device level emulation [2] but that was rejected with a final conclusion
to add support for non po2 zoned device in the complete stack[3] 2)
adding support to the complete stack by removing the constraint in the
block layer and NVMe layer with support to btrfs, zonefs, etc which was
rejected with a conclusion to add a dm target for FS support [0]
to reduce the regression impact.
This series adds support to npo2 zoned devices in the block and nvme
layer and a new **dm target** is added: dm-po2z-target. This new
target will be initially used for filesystems such as btrfs and
f2fs until native npo2 zone support is added.
- Patchset description:
Patches 1-3 deals with removing the po2 constraint from the
block layer.
Patches 4-5 deals with removing the constraint from nvme zns.
Patch 5 removes the po2 contraint in null blk
Patch 6 adds npo2 support to zonefs
Patches 7-13 adds support for npo2 zoned devices in the DM layer and
adds a new target dm-po2z-target which converts a zoned device with npo2
zone size into a zoned target with po2 zone size.
The patch series is based on linux-next tag: next-20220802
Testing:
The new target was tested with blktest and zonefs test suite in qemu and
on a real ZNS device with npo2 zone size.
Performance Measurement on a null blk:
Device:
zone size = 128M, blocksize=4k
FIO cmd:
fio --name=zbc --filename=/dev/nullb0 --direct=1 --zonemode=zbd --size=23G
--io_size=<iosize> --ioengine=io_uring --iodepth=<iod> --rw=<mode> --bs=4k
--loops=4
The following results are an average of 4 runs on AMD Ryzen 5 5600X with
32GB of RAM:
Sequential Write:
x-----------------x---------------------------------x---------------------------------x
| IOdepth | 8 | 16 |
x-----------------x---------------------------------x---------------------------------x
| | KIOPS |BW(MiB/s) | Lat(usec) | KIOPS |BW(MiB/s) | Lat(usec) |
x-----------------x---------------------------------x---------------------------------x
| Without patch | 578 | 2257 | 12.80 | 576 | 2248 | 25.78 |
x-----------------x---------------------------------x---------------------------------x
| With patch | 581 | 2268 | 12.74 | 576 | 2248 | 25.85 |
x-----------------x---------------------------------x---------------------------------x
Sequential read:
x-----------------x---------------------------------x---------------------------------x
| IOdepth | 8 | 16 |
x-----------------x---------------------------------x---------------------------------x
| | KIOPS |BW(MiB/s) | Lat(usec) | KIOPS |BW(MiB/s) | Lat(usec) |
x-----------------x---------------------------------x---------------------------------x
| Without patch | 667 | 2605 | 11.79 | 675 | 2637 | 23.49 |
x-----------------x---------------------------------x---------------------------------x
| With patch | 667 | 2605 | 11.79 | 675 | 2638 | 23.48 |
x-----------------x---------------------------------x---------------------------------x
Random read:
x-----------------x---------------------------------x---------------------------------x
| IOdepth | 8 | 16 |
x-----------------x---------------------------------x---------------------------------x
| | KIOPS |BW(MiB/s) | Lat(usec) | KIOPS |BW(MiB/s) | Lat(usec) |
x-----------------x---------------------------------x---------------------------------x
| Without patch | 522 | 2038 | 15.05 | 514 | 2006 | 30.87 |
x-----------------x---------------------------------x---------------------------------x
| With patch | 522 | 2039 | 15.04 | 523 | 2042 | 30.33 |
x-----------------x---------------------------------x---------------------------------x
Minor variations are noticed in Sequential write with io depth 8 and
in random read with io depth 16. But overall no noticeable differences
were noticed
[0] https://lore.kernel.org/lkml/PH0PR04MB74166C87F694B150A5AE0F009BD09@PH0PR04MB7416.namprd04.prod.outlook.com/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?h=dev-test&id=6afcf6493578e77528abe65ab8b12f3e1c16749f
[2] https://lore.kernel.org/all/20220310094725.GA28499@lst.de/T/
[3] https://lore.kernel.org/all/20220315135245.eqf4tqngxxb7ymqa@unifi/
Changes since v1:
- Put the function declaration and its usage in the same commit (Bart)
- Remove bdev_zone_aligned function (Bart)
- Change the name from blk_queue_zone_aligned to blk_queue_is_zone_start
(Damien)
- q is never null in from bdev_get_queue (Damien)
- Add condition during bringup and check for zsze == zcap for npo2
drives (Damien)
- Rounddown operation should be made generic to work in 32 bits arch
(bart)
- Add comments where generic calculation is directly used instead having
special handling for po2 zone sizes (Hannes)
- Make the minimum zone size alignment requirement for btrfs to be 1M
instead of BTRFS_STRIPE_LEN(David)
Changes since v2:
- Minor formatting changes
Changes since v3:
- Make superblock mirror align with the existing superblock log offsets
(David)
- DM change return value and remove extra newline
- Optimize null blk zone index lookup with shift for po2 zone size
Changes since v4:
- Remove direct filesystems support for npo2 devices (Johannes, Hannes,
Damien)
Changes since v5:
- Use DIV_ROUND_UP* helper instead of round_up as it breaks 32bit arch
build in null blk(kernel-test-robot, Nathan)
- Use DIV_ROUND_UP_SECTOR_T also in blkdev_nr_zones function instead of
open coding it with div64_u64
- Added extra condition in dm-zoned and in dm to reject non power of 2
zone sizes.
Changes since v6:
- Added a new dm target for non power of 2 devices
- Added support for non power of 2 devices in the DM layer.
Changes since v7:
- Improved dm target for non power of 2 zoned devices with some bug
fixes and rearrangement
- Removed some unnecessary comments.
Changes since v8:
- Rename dm-po2z to dm-po2zone
- set max_io_len for the target to po2 zone size sector
- Simplify dm-po2zone target by removing some superfluous conditions
- Added documentation for the new dm-po2zone target
- Change pr_warn to pr_err for critical errors
- Split patch 2 and 11 with their corresponding prep patches
- Minor spelling and grammatical improvements
Luis Chamberlain (1):
dm-zoned: ensure only power of 2 zone sizes are allowed
Pankaj Raghav (12):
block: make bdev_nr_zones and disk_zone_no generic for npo2 zone size
block:rearrange bdev_{is_zoned,zone_sectors,get_queue} helpers in
blkdev.h
block: allow blk-zoned devices to have non-power-of-2 zone size
nvmet: Allow ZNS target to support non-power_of_2 zone sizes
nvme: zns: Allow ZNS drives that have non-power_of_2 zone size
null_blk: allow zoned devices with non power-of-2 zone sizes
zonefs: allow non power of 2 zoned devices
dm-zone: use generic helpers to calculate offset from zone start
dm-table: allow zoned devices with non power-of-2 zone sizes
dm: call dm_zone_endio after the target endio callback for zoned
devices
dm: introduce DM_EMULATED_ZONES target type
dm: add power-of-2 target for zoned devices with non power-of-2 zone
sizes
.../admin-guide/device-mapper/dm-po2zone.rst | 71 ++++++
.../admin-guide/device-mapper/index.rst | 1 +
block/blk-core.c | 2 +-
block/blk-zoned.c | 37 ++-
drivers/block/null_blk/main.c | 5 +-
drivers/block/null_blk/null_blk.h | 1 +
drivers/block/null_blk/zoned.c | 18 +-
drivers/md/Kconfig | 10 +
drivers/md/Makefile | 2 +
drivers/md/dm-po2zone-target.c | 240 ++++++++++++++++++
drivers/md/dm-table.c | 20 +-
drivers/md/dm-zone.c | 9 +-
drivers/md/dm-zoned-target.c | 8 +
drivers/md/dm.c | 8 +-
drivers/nvme/host/zns.c | 16 +-
drivers/nvme/target/zns.c | 3 +-
fs/zonefs/super.c | 6 +-
fs/zonefs/zonefs.h | 1 -
include/linux/blkdev.h | 85 +++++--
include/linux/device-mapper.h | 9 +
20 files changed, 477 insertions(+), 75 deletions(-)
create mode 100644 Documentation/admin-guide/device-mapper/dm-po2zone.rst
create mode 100644 drivers/md/dm-po2zone-target.c
--
2.25.1
Powered by blists - more mailing lists