lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAM9d7cjuo0Xeq8cLGZK+McTVzSOrK=ZWaBBpgHGosK0e5t0wcQ@mail.gmail.com>
Date:   Thu, 4 Aug 2022 14:02:02 -0700
From:   Namhyung Kim <namhyung@...nel.org>
To:     Ingo Molnar <mingo@...nel.org>
Cc:     Arnaldo Carvalho de Melo <acme@...nel.org>,
        Jiri Olsa <jolsa@...nel.org>,
        Peter Zijlstra <peterz@...radead.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Ian Rogers <irogers@...gle.com>,
        linux-perf-users <linux-perf-users@...r.kernel.org>,
        Will Deacon <will@...nel.org>,
        Waiman Long <longman@...hat.com>,
        Boqun Feng <boqun.feng@...il.com>,
        Davidlohr Bueso <dave@...olabs.net>
Subject: Re: [PATCHSET 0/6] perf lock: Add contention subcommand (v1)

On Thu, Aug 4, 2022 at 1:37 AM Ingo Molnar <mingo@...nel.org> wrote:
>
>
> * Namhyung Kim <namhyung@...nel.org> wrote:
>
> > Hi Ingo,
> >
> > On Wed, Aug 3, 2022 at 2:51 AM Ingo Molnar <mingo@...nel.org> wrote:
> > >
> > >
> > > * Namhyung Kim <namhyung@...nel.org> wrote:
> > >
> > > > Hello,
> > > >
> > > > It's to add a new subcommand 'contention' (shortly 'con') to perf lock.
> > > >
> > > > The new subcommand is to handle the new lock:contention_{begin,end}
> > > > tracepoints and shows lock type and caller address like below:
> > > >
> > > >   $ perf lock contention
> > > >    contended   total wait     max wait     avg wait         type   caller
> > > >
> > > >          238      1.41 ms     29.20 us      5.94 us     spinlock   update_blocked_averages+0x4c
> > > >            1    902.08 us    902.08 us    902.08 us      rwsem:R   do_user_addr_fault+0x1dd
> > > >           81    330.30 us     17.24 us      4.08 us     spinlock   _nohz_idle_balance+0x172
> > > >            2     89.54 us     61.26 us     44.77 us     spinlock   do_anonymous_page+0x16d
> > > >           24     78.36 us     12.27 us      3.27 us        mutex   pipe_read+0x56
> > > >            2     71.58 us     59.56 us     35.79 us     spinlock   __handle_mm_fault+0x6aa
> > > >            6     25.68 us      6.89 us      4.28 us     spinlock   do_idle+0x28d
> > > >            1     18.46 us     18.46 us     18.46 us      rtmutex   exec_fw_cmd+0x21b
> > > >            3     15.25 us      6.26 us      5.08 us     spinlock   tick_do_update_jiffies64+0x2c
> > > >    ...
> > >
> > > Wouldn't it also be useful to display a lock contention percentage value,
> > > the ratio of fastpath vs. contended/wait events?
> > >
> > > That's usually the first-approximation metric to see how contended
> > > different locks are, and the average wait time quantifies it.
> >
> > Yeah, that'd be nice to have.  But it requires some action in the fast
> > path which I don't want because I'd like to use this in production.  So
> > these new tracepoints were added only in the slow path.
>
> Yeah. Might make sense to re-measure the impact of possibly doing that
> though: most of the locking fast-patch is out of line already and could be
> instrumented, with only a handful of inlined primitives -
> CONFIG_UNINLINE_SPIN_UNLOCK in particular.

I'll take a look and measure overhead with tracepoints in the fast path.

>
> How many additional inlined NOP sequences does this add in a defconfig
> kernel? How much is the bloat, and would it be acceptable for production
> kernels?

Last time I measured that it added around 1.3KB of code with the
tracepoints but they are all in the slow path.  So it'd be ok for production.

>
> The other question is to keep tracing overhead low in production systems.
>
> For that we'd have to implement some concept of 'sampling tracepoints',
> which generate only one event for every 128 fast path invocations or so,
> but stay out of the way & don't slow down the system otherwise.

Yeah, it looks like we can do it with perf tools using a custom period like
`-c 128` option.  But I'm not sure how it can deal with the slow path in
sync.  IOW the fast path and the slow path will fire separately.

>
> OTOH frequently used locking fastpaths are measured via regular PMU
> sampling based profiling already.

Sure.  Also note that the recent off-cpu profiling (perf record --off-cpu)
would be helpful to see impact of the sleeping locks.

>
> > Instead, I think we can display the ratio of (total) contended time vs.
> > wall clock time.  What do you think?
>
> That looks useful too - but also the time spent waiting/spinning in a
> thread vs. the time spent actually running and executing real stuff.
>
> That ratio could easily get over 100%, for wait-dominated workloads - so
> ordering by that ratio would highlight the tasks that make the least amount
> of real progress. Measuring the ratio based only on wall clock time would
> hide this aspect.

Do you talk about per-thread stats?  It has the -t/--threads option but it
doesn't work with this BPF program yet.  Will work on it.

By default it shows per-lock (well.. actually per-callstack) contention stat.
We use caller symbols because there're no symbols for locks in general.
It'd be nice if we could merge the stats for the same lock (class) from
different call stacks.

Thanks,
Namhyung

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ