[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 8 Aug 2022 11:16:20 +0200
From: Hans de Goede <hdegoede@...hat.com>
To: margeyang <marge.yang@...aptics.corp-partner.google.com>,
dmitry.torokhov@...il.com, linux-input@...r.kernel.org,
linux-kernel@...r.kernel.org, benjamin.tissoires@...hat.com
Cc: marge.yang@...synaptics.com, derek.cheng@...synaptcs.com,
vincent.huang@...synaptics.com
Subject: Re: [PATCH] HID: HID-rmi - ignore to rmi_hid_read_block after system
resumes.
Hi,
On 8/8/22 11:07, margeyang wrote:
> From: Marge Yang <marge.yang@...aptics.corp-partner.google.com>
>
> The interrupt GPIO will be pulled down once
> after RMI driver reads this command(Report ID:0x0A).
> It will cause "Dark resume test fail" for chromebook device.
> Hence, TP driver will ignore rmi_hid_read_block function once
> after system resumes.
This sounds like it is an issue in one specific touchpad model,
yet you are changing the code to ignore the first readblock call
on resume on *all* models ?
Regards,
Hans
>
> Signed-off-by: Marge Yang<marge.yang@...aptics.corp-partner.google.com>
> ---
> drivers/hid/hid-rmi.c | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
> index 311eee599ce9..236a38bfcf9a 100644
> --- a/drivers/hid/hid-rmi.c
> +++ b/drivers/hid/hid-rmi.c
> @@ -101,7 +101,7 @@ struct rmi_data {
> };
>
> #define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
> -
> +int ignoreonce;
> static int rmi_write_report(struct hid_device *hdev, u8 *report, int len);
>
> /**
> @@ -203,7 +203,13 @@ static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr,
> if (ret < 0)
> goto exit;
> }
> -
> + if (ignoreonce == 1) {
> + dev_err(&hdev->dev,
> + "ignoreonce (%d)\n",
> + ignoreonce);
> + ignoreonce = 0;
> + goto exit;
> + }
> for (retries = 5; retries > 0; retries--) {
> data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
> data->writeReport[1] = 0; /* old 1 byte read count */
> @@ -468,8 +474,12 @@ static int rmi_post_resume(struct hid_device *hdev)
> ret = hid_hw_open(hdev);
> if (ret)
> return ret;
> -
> + // Avoid to read rmi_hid_read_block once after system resumes.
> + // The interrupt will be pulled down
> + // after RMI Read command(Report ID:0x0A).
> + ignoreonce = 1;
> ret = rmi_reset_attn_mode(hdev);
> + ignoreonce = 0;
> if (ret)
> goto out;
>
Powered by blists - more mailing lists