[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220809220436.711020-8-daniel.lezcano@linaro.org>
Date: Wed, 10 Aug 2022 00:04:17 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: daniel.lezcano@...aro.org, rafael@...nel.org
Cc: rui.zhang@...el.com, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org,
Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
linux-samsung-soc@...r.kernel.org (open list:SAMSUNG THERMAL DRIVER),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/SAMSUNG S3C,
S5P AND EXYNOS ARM ARCHITECTURES)
Subject: [PATCH v2 07/26] thermal/drivers/exynos: Use generic thermal_zone_get_trip() function
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
---
drivers/thermal/samsung/exynos_tmu.c | 41 ++++++++++------------------
1 file changed, 15 insertions(+), 26 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 51874d0a284c..5204e343d5b0 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -260,16 +260,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tzd = data->tzd;
- const struct thermal_trip * const trips =
- of_thermal_get_trip_points(tzd);
unsigned int status;
- int ret = 0, temp, hyst;
-
- if (!trips) {
- dev_err(&pdev->dev,
- "Cannot get trip points from device tree!\n");
- return -ENODEV;
- }
+ int ret = 0, temp;
if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
ret = tzd->ops->get_crit_temp(tzd, &temp);
@@ -303,19 +295,16 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
/* Write temperature code for rising and falling threshold */
for (i = 0; i < ntrips; i++) {
- /* Write temperature code for rising threshold */
- ret = tzd->ops->get_trip_temp(tzd, i, &temp);
- if (ret)
- goto err;
- temp /= MCELSIUS;
- data->tmu_set_trip_temp(data, i, temp);
- /* Write temperature code for falling threshold */
- ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
+ struct thermal_trip trip;
+
+ ret = thermal_zone_get_trip(tzd, i, &trip);
if (ret)
goto err;
- hyst /= MCELSIUS;
- data->tmu_set_trip_hyst(data, i, temp, hyst);
+
+ data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS);
+ data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS,
+ trip.hysteresis / MCELSIUS);
}
data->tmu_clear_irqs(data);
@@ -360,21 +349,21 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
}
static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
- int trip, u8 temp)
+ int trip_id, u8 temp)
{
- const struct thermal_trip * const trips =
- of_thermal_get_trip_points(data->tzd);
+ struct thermal_trip trip;
u8 ref, th_code;
- ref = trips[0].temperature / MCELSIUS;
-
- if (trip == 0) {
+ thermal_zone_get_trip(data->tzd, 0, &trip);
+ ref = trip.temperature / MCELSIUS;
+
+ if (trip_id == 0) {
th_code = temp_to_code(data, ref);
writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
}
temp -= ref;
- writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
+ writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip_id * 4);
}
/* failing thresholds are not supported on Exynos4210 */
--
2.34.1
Powered by blists - more mailing lists