| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YvIgR9RBDMp9VJ6B@google.com>
Date: Tue, 9 Aug 2022 09:52:23 +0100
From: Lee Jones <lee.jones@...aro.org>
To: cy_huang <u0084500@...il.com>
Cc: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
broonie@...nel.org, dmitry.torokhov@...il.com, lgirdwood@...il.com,
cy_huang@...htek.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
Lee Jones <lee@...nel.org>
Subject: Re: [PATCH v3 2/3] mfd: rt5120: Add Richtek PMIC support
On Thu, 14 Jul 2022, cy_huang wrote:
> From: ChiYuan Huang <cy_huang@...htek.com>
>
> Add Richtek RT5120 PMIC I2C driver.
>
> Signed-off-by: ChiYuan Huang <cy_huang@...htek.com>
> ---
> Since v3:
> - Use a 'dev' variable and dev_err_probe to decrease the LOC in mfd.
>
> ---
> drivers/mfd/Kconfig | 12 +++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/rt5120.c | 121 +++++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 134 insertions(+)
> create mode 100644 drivers/mfd/rt5120.c
Mostly good, couple of nits.
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3b59456..866619c 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1127,6 +1127,18 @@ config MFD_RT5033
> sub-devices like charger, fuel gauge, flash LED, current source,
> LDO and Buck.
>
> +config MFD_RT5120
> + tristate "Richtek RT5120 Power Management IC"
> + depends on I2C
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + help
> + The enables support for Richtek RT5120 PMIC. It includes four high
> + efficiency buck converters and one LDO voltage regulator. The device
> + is targeted at providing the CPU voltage, memory, I/O and peripheral
> + power rails in home entertainment devices.
> +
> config MFD_RC5T583
> bool "Ricoh RC5T583 Power Management system device"
> depends on I2C=y
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 858cacf..27e8add 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -234,6 +234,7 @@ obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
> obj-$(CONFIG_MFD_DLN2) += dln2.o
> obj-$(CONFIG_MFD_RT4831) += rt4831.o
> obj-$(CONFIG_MFD_RT5033) += rt5033.o
> +obj-$(CONFIG_MFD_RT5120) += rt5120.o
> obj-$(CONFIG_MFD_SKY81452) += sky81452.o
>
> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> diff --git a/drivers/mfd/rt5120.c b/drivers/mfd/rt5120.c
> new file mode 100644
> index 00000000..12372fa
> --- /dev/null
> +++ b/drivers/mfd/rt5120.c
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: GPL-2.0+
No Copyright?
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/regmap.h>
> +
> +#define RT5120_REG_INTENABLE 0x1D
> +#define RT5120_REG_INTSTAT 0x1E
> +#define RT5120_REG_FZCMODE 0x44
> +
> +#define RT5120_INT_HOTDIE 0
> +#define RT5120_INT_PWRKEY_REL 5
> +#define RT5120_INT_PWRKEY_PRESS 6
> +
> +static const struct regmap_range rt5120_rd_yes_ranges[] = {
> + regmap_reg_range(0x03, 0x13),
> + regmap_reg_range(0x1c, 0x20),
> + regmap_reg_range(0x44, 0x44)
> +};
> +
> +static const struct regmap_range rt5120_wr_yes_ranges[] = {
> + regmap_reg_range(0x06, 0x13),
> + regmap_reg_range(0x1c, 0x20),
> + regmap_reg_range(0x44, 0x44)
> +};
> +
> +static const struct regmap_access_table rt5120_rd_table = {
> + .yes_ranges = rt5120_rd_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(rt5120_rd_yes_ranges),
> +};
> +
> +static const struct regmap_access_table rt5120_wr_table = {
> + .yes_ranges = rt5120_wr_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(rt5120_wr_yes_ranges),
> +};
> +
> +static const struct regmap_config rt5120_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = RT5120_REG_FZCMODE,
> +
> + .wr_table = &rt5120_wr_table,
> + .rd_table = &rt5120_rd_table,
> +};
> +
> +static const struct regmap_irq rt5120_irqs[] = {
> + REGMAP_IRQ_REG_LINE(RT5120_INT_HOTDIE, 8),
> + REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_REL, 8),
> + REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_PRESS, 8)
> +};
> +
> +static const struct regmap_irq_chip rt5120_irq_chip = {
> + .name = "rt5120-pmic",
> + .status_base = RT5120_REG_INTSTAT,
> + .mask_base = RT5120_REG_INTENABLE,
> + .ack_base = RT5120_REG_INTSTAT,
> + .mask_invert = true,
> + .use_ack = true,
> + .num_regs = 1,
> + .irqs = rt5120_irqs,
> + .num_irqs = ARRAY_SIZE(rt5120_irqs),
> +};
> +
> +static const struct resource rt5120_regulator_resources[] = {
> + DEFINE_RES_IRQ(RT5120_INT_HOTDIE)
> +};
> +
> +static const struct resource rt5120_pwrkey_resources[] = {
> + DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_PRESS, "pwrkey-press"),
> + DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_REL, "pwrkey-release")
> +};
> +
> +static const struct mfd_cell rt5120_devs[] = {
> + MFD_CELL_RES("rt5120-regulator", rt5120_regulator_resources),
> + MFD_CELL_OF("rt5120-pwrkey", rt5120_pwrkey_resources, NULL, 0, 0,
> + "richtek,rt5120-pwrkey")
This can be on one line if you want.
> +};
> +
> +static int rt5120_probe(struct i2c_client *i2c)
> +{
> + struct device *dev = &i2c->dev;
> + struct regmap *regmap;
> + struct regmap_irq_chip_data *irq_data;
> + int ret;
> +
> + regmap = devm_regmap_init_i2c(i2c, &rt5120_regmap_config);
> + if (IS_ERR(regmap))
> + return dev_err_probe(dev, PTR_ERR(regmap),
> + "Failed to init regmap\n");
> +
> + ret = devm_regmap_add_irq_chip(dev, regmap, i2c->irq, IRQF_ONESHOT, 0,
> + &rt5120_irq_chip, &irq_data);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to add irq chip\n");
"IRQ"
> + return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, rt5120_devs,
> + ARRAY_SIZE(rt5120_devs), NULL, 0,
> + regmap_irq_get_domain(irq_data));
> +}
> +
> +static const struct of_device_id rt5120_device_match_table[] = {
> + { .compatible = "richtek,rt5120" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, rt5120_device_match_table);
> +
> +static struct i2c_driver rt5120_driver = {
> + .driver = {
> + .name = "rt5120",
> + .of_match_table = rt5120_device_match_table,
> + },
> + .probe_new = rt5120_probe,
> +};
> +module_i2c_driver(rt5120_driver);
> +
> +MODULE_AUTHOR("ChiYuan Huang <cy_huang@...htek.com>");
> +MODULE_DESCRIPTION("Richtek RT5120 I2C driver");
> +MODULE_LICENSE("GPL v2");
--
DEPRECATED: Please use lee@...nel.org
Powered by blists - more mailing lists