lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220809150442.3525-2-henning.schild@siemens.com>
Date:   Tue, 9 Aug 2022 17:04:39 +0200
From:   Henning Schild <henning.schild@...mens.com>
To:     Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <brgl@...ev.pl>,
        Pavel Machek <pavel@....cz>,
        Hans de Goede <hdegoede@...hat.com>,
        Mark Gross <markgross@...nel.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Lee Jones <lee@...nel.org>, <linux-gpio@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-leds@...r.kernel.org>,
        <platform-driver-x86@...r.kernel.org>
CC:     Sheng-Yuan Huang <syhuang3@...oton.com>,
        Tasanakorn Phaipool <tasanakorn@...il.com>,
        Henning Schild <henning.schild@...mens.com>
Subject: [PATCH v2 1/4] gpio-f7188x: Add GPIO support for Nuvoton NCT6116

Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
very similar to the ones from Fintek. In other subsystems they also
share drivers and are called a family of drivers.

For the GPIO subsystem the only difference is that the direction bit is
reversed and that there is only one data bit per pin. On the SuperIO
level the logical device is another one.

Signed-off-by: Henning Schild <henning.schild@...mens.com>
---
 drivers/gpio/gpio-f7188x.c | 70 +++++++++++++++++++++++++++-----------
 1 file changed, 51 insertions(+), 19 deletions(-)

diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
index 18a3147f5a42..4d8f38bc3b45 100644
--- a/drivers/gpio/gpio-f7188x.c
+++ b/drivers/gpio/gpio-f7188x.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882, F71889 and F81866
+ * and Nuvoton Super-I/O NCT6116D
  *
  * Copyright (C) 2010-2013 LaCie
  *
@@ -22,13 +23,11 @@
 #define SIO_LDSEL		0x07	/* Logical device select */
 #define SIO_DEVID		0x20	/* Device ID (2 bytes) */
 #define SIO_DEVREV		0x22	/* Device revision */
-#define SIO_MANID		0x23	/* Fintek ID (2 bytes) */
 
-#define SIO_LD_GPIO		0x06	/* GPIO logical device */
 #define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
 #define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
 
-#define SIO_FINTEK_ID		0x1934	/* Manufacturer ID */
+#define SIO_LD_GPIO_FINTEK	0x06	/* GPIO logical device */
 #define SIO_F71869_ID		0x0814	/* F71869 chipset ID */
 #define SIO_F71869A_ID		0x1007	/* F71869A chipset ID */
 #define SIO_F71882_ID		0x0541	/* F71882 chipset ID */
@@ -38,6 +37,8 @@
 #define SIO_F81804_ID		0x1502  /* F81804 chipset ID, same for f81966 */
 #define SIO_F81865_ID		0x0704	/* F81865 chipset ID */
 
+#define SIO_LD_GPIO_NUVOTON	0x07	/* GPIO logical device */
+#define SIO_NCT6116D_ID		0xD283  /* NCT6116D chipset ID */
 
 enum chips {
 	f71869,
@@ -48,6 +49,7 @@ enum chips {
 	f81866,
 	f81804,
 	f81865,
+	nct6116d,
 };
 
 static const char * const f7188x_names[] = {
@@ -59,10 +61,12 @@ static const char * const f7188x_names[] = {
 	"f81866",
 	"f81804",
 	"f81865",
+	"nct6116d",
 };
 
 struct f7188x_sio {
 	int addr;
+	int device;
 	enum chips type;
 };
 
@@ -170,6 +174,9 @@ static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
 /* Output mode register (0:open drain 1:push-pull). */
 #define gpio_out_mode(base) (base + 3)
 
+#define gpio_needs_invert(device)	((device) != SIO_LD_GPIO_FINTEK)
+#define gpio_single_data(device)	((device) != SIO_LD_GPIO_FINTEK)
+
 static struct f7188x_gpio_bank f71869_gpio_bank[] = {
 	F7188X_GPIO_BANK(0, 6, 0xF0),
 	F7188X_GPIO_BANK(10, 8, 0xE0),
@@ -254,6 +261,17 @@ static struct f7188x_gpio_bank f81865_gpio_bank[] = {
 	F7188X_GPIO_BANK(60, 5, 0x90),
 };
 
+static struct f7188x_gpio_bank nct6116d_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 8, 0xE0),
+	F7188X_GPIO_BANK(10, 8, 0xE4),
+	F7188X_GPIO_BANK(20, 8, 0xE8),
+	F7188X_GPIO_BANK(30, 8, 0xEC),
+	F7188X_GPIO_BANK(40, 8, 0xF0),
+	F7188X_GPIO_BANK(50, 8, 0xF4),
+	F7188X_GPIO_BANK(60, 8, 0xF8),
+	F7188X_GPIO_BANK(70, 1, 0xFC),
+};
+
 static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 {
 	int err;
@@ -264,13 +282,16 @@ static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	err = superio_enter(sio->addr);
 	if (err)
 		return err;
-	superio_select(sio->addr, SIO_LD_GPIO);
+	superio_select(sio->addr, sio->device);
 
 	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
 
 	superio_exit(sio->addr);
 
-	if (dir & 1 << offset)
+	if (gpio_needs_invert(sio->device))
+		dir = ~dir;
+
+	if (dir & BIT(offset))
 		return GPIO_LINE_DIRECTION_OUT;
 
 	return GPIO_LINE_DIRECTION_IN;
@@ -286,10 +307,14 @@ static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
 	err = superio_enter(sio->addr);
 	if (err)
 		return err;
-	superio_select(sio->addr, SIO_LD_GPIO);
+	superio_select(sio->addr, sio->device);
 
 	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
-	dir &= ~BIT(offset);
+
+	if (gpio_needs_invert(sio->device))
+		dir |= BIT(offset);
+	else
+		dir &= ~BIT(offset);
 	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
 
 	superio_exit(sio->addr);
@@ -307,11 +332,11 @@ static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset)
 	err = superio_enter(sio->addr);
 	if (err)
 		return err;
-	superio_select(sio->addr, SIO_LD_GPIO);
+	superio_select(sio->addr, sio->device);
 
 	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
 	dir = !!(dir & BIT(offset));
-	if (dir)
+	if (gpio_single_data(sio->device) || dir)
 		data = superio_inb(sio->addr, gpio_data_out(bank->regbase));
 	else
 		data = superio_inb(sio->addr, gpio_data_in(bank->regbase));
@@ -332,7 +357,7 @@ static int f7188x_gpio_direction_out(struct gpio_chip *chip,
 	err = superio_enter(sio->addr);
 	if (err)
 		return err;
-	superio_select(sio->addr, SIO_LD_GPIO);
+	superio_select(sio->addr, sio->device);
 
 	data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase));
 	if (value)
@@ -342,7 +367,10 @@ static int f7188x_gpio_direction_out(struct gpio_chip *chip,
 	superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out);
 
 	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
-	dir |= BIT(offset);
+	if (gpio_needs_invert(sio->device))
+		dir &= ~BIT(offset);
+	else
+		dir |= BIT(offset);
 	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
 
 	superio_exit(sio->addr);
@@ -360,7 +388,7 @@ static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	err = superio_enter(sio->addr);
 	if (err)
 		return;
-	superio_select(sio->addr, SIO_LD_GPIO);
+	superio_select(sio->addr, sio->device);
 
 	data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase));
 	if (value)
@@ -388,7 +416,7 @@ static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
 	err = superio_enter(sio->addr);
 	if (err)
 		return err;
-	superio_select(sio->addr, SIO_LD_GPIO);
+	superio_select(sio->addr, sio->device);
 
 	data = superio_inb(sio->addr, gpio_out_mode(bank->regbase));
 	if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
@@ -449,6 +477,10 @@ static int f7188x_gpio_probe(struct platform_device *pdev)
 		data->nr_bank = ARRAY_SIZE(f81865_gpio_bank);
 		data->bank = f81865_gpio_bank;
 		break;
+	case nct6116d:
+		data->nr_bank = ARRAY_SIZE(nct6116d_gpio_bank);
+		data->bank = nct6116d_gpio_bank;
+		break;
 	default:
 		return -ENODEV;
 	}
@@ -485,12 +517,8 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
 		return err;
 
 	err = -ENODEV;
-	devid = superio_inw(addr, SIO_MANID);
-	if (devid != SIO_FINTEK_ID) {
-		pr_debug(DRVNAME ": Not a Fintek device at 0x%08x\n", addr);
-		goto err;
-	}
 
+	sio->device = SIO_LD_GPIO_FINTEK;
 	devid = superio_inw(addr, SIO_DEVID);
 	switch (devid) {
 	case SIO_F71869_ID:
@@ -517,8 +545,12 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
 	case SIO_F81865_ID:
 		sio->type = f81865;
 		break;
+	case SIO_NCT6116D_ID:
+		sio->device = SIO_LD_GPIO_NUVOTON;
+		sio->type = nct6116d;
+		break;
 	default:
-		pr_info(DRVNAME ": Unsupported Fintek device 0x%04x\n", devid);
+		pr_info(DRVNAME ": Unsupported device 0x%04x\n", devid);
 		goto err;
 	}
 	sio->addr = addr;
-- 
2.35.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ