linux-kernel - [PATCH v2 0/2] spi: stm32_qspi: use QSPI bus as 8 lines communication channel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 10 Aug 2022 11:32:13 +0200
From:   <patrice.chotard@...s.st.com>
To:     Mark Brown <broonie@...nel.org>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>
CC:     <linux-spi@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <christophe.kerello@...s.st.com>,
        <patrice.chotard@...s.st.com>, <devicetree@...r.kernel.org>
Subject: [PATCH v2 0/2] spi: stm32_qspi: use QSPI bus as 8 lines communication channel

From: Patrice Chotard <patrice.chotard@...s.st.com>

The goal of this series is to allow to use QSPI bus as a 8 lines communication 
channel for specific purpose.

The QSPI block offers the possibility to communicate with 2 flashes in 
parrallel using the dual flash mode, 8 data lines are then used.
Usage of DT parallel-memories property is needed to enable dual flash mode.

The addition of the legacy transfer_one_message() spi callback is also needed
as currently the stm32-qspi driver only supports spi_controller_mem_ops API.

 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi |  50 +++++++----
 arch/arm/boot/dts/stm32mp157c-ev1.dts    |  12 ++-
 drivers/spi/spi-stm32-qspi.c             | 103 +++++++++++++++++++++--
 3 files changed, 139 insertions(+), 26 deletions(-)

-- 
2.25.1