[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220810140724.182389-3-jpanis@baylibre.com>
Date: Wed, 10 Aug 2022 16:07:23 +0200
From: Julien Panis <jpanis@...libre.com>
To: vilhelm.gray@...il.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, mranostay@...com,
Julien Panis <jpanis@...libre.com>
Subject: [PATCH v4 2/3] Documentation: ABI: add sysfs-bus-counter-ecap
This commit adds an ABI file for TI ECAP used in capture operating mode.
Signed-off-by: Julien Panis <jpanis@...libre.com>
---
.../ABI/testing/sysfs-bus-counter-ecap | 64 +++++++++++++++++++
1 file changed, 64 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ecap
diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ecap b/Documentation/ABI/testing/sysfs-bus-counter-ecap
new file mode 100644
index 000000000000..ca530a6806de
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-counter-ecap
@@ -0,0 +1,64 @@
+What: /sys/bus/counter/devices/counter0/signal0/polarity1
+What: /sys/bus/counter/devices/counter0/signal0/polarity2
+What: /sys/bus/counter/devices/counter0/signal0/polarity3
+What: /sys/bus/counter/devices/counter0/signal0/polarity4
+KernelVersion: 5.19
+Contact: jpanis@...libre.com
+Description:
+ ECAP module includes 4 timestamp capture registers.
+ For all 4 sequenced timestamp capture events (1->2->3->4->1->...),
+ edge polarity can be selected. Then, each capture register can be
+ tuned to capture event by either:
+
+ - "rising"
+ - "falling"
+
+ Reading returns current trigger polarity.
+
+ Writing value before enabling capture sets trigger polarity.
+
+What: /sys/bus/counter/devices/counter0/signal0/polarity1_available
+What: /sys/bus/counter/devices/counter0/signal0/polarity2_available
+What: /sys/bus/counter/devices/counter0/signal0/polarity3_available
+What: /sys/bus/counter/devices/counter0/signal0/polarity4_available
+KernelVersion: 5.19
+Contact: jpanis@...libre.com
+Description:
+ Discrete set of available values for the respective polarity X
+ configuration are listed in this file. Values are delimited by
+ newline characters.
+
+What: /sys/bus/counter/devices/counter0/count0/enable
+KernelVersion: 5.19
+Contact: jpanis@...libre.com
+Description:
+ Whether ECAP is enabled. Valid attribute values are boolean.
+
+ This attribute is intended to serve as a start/stop mechanism
+ for ECAP.
+
+What: /sys/bus/counter/devices/counter0/count0/count
+KernelVersion: 5.19
+Contact: jpanis@...libre.com
+Description:
+ Read-only attribute that indicates the current base counter value.
+
+What: /sys/bus/counter/devices/counter0/count0/capture1
+What: /sys/bus/counter/devices/counter0/count0/capture2
+What: /sys/bus/counter/devices/counter0/count0/capture3
+What: /sys/bus/counter/devices/counter0/count0/capture4
+KernelVersion: 5.19
+Contact: jpanis@...libre.com
+Description:
+ Read-only attributes that indicate the last timestamp captured
+ for the respective capture X register.
+
+What: /sys/bus/counter/devices/counter0/count0/capture1_component_id
+What: /sys/bus/counter/devices/counter0/count0/capture2_component_id
+What: /sys/bus/counter/devices/counter0/count0/capture3_component_id
+What: /sys/bus/counter/devices/counter0/count0/capture4_component_id
+KernelVersion: 5.19
+Contact: jpanis@...libre.com
+Description:
+ Read-only attributes that indicate the component ID of the
+ respective extension or synapse.
--
2.25.1
Powered by blists - more mailing lists