linux-kernel - Re: [PATCH v1 1/2] Enable balloon drivers to report inflated memory

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <5EFFFB23-9F73-4F07-B6FF-3BD05976D427@linux.dev>
Date:   Wed, 10 Aug 2022 11:05:40 +0800
From:   Muchun Song <muchun.song@...ux.dev>
To:     Alexander Atanasov <alexander.atanasov@...tuozzo.com>
Cc:     Jonathan Corbet <corbet@....net>,
        Andrew Morton <akpm@...ux-foundation.org>, kernel@...nvz.org,
        David Hildenbrand <david@...hat.com>,
        Wei Liu <wei.liu@...nel.org>, Nadav Amit <namit@...are.com>,
        linux-kernel@...r.kernel.org, linux-fsdevel@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-mm@...ck.org
Subject: Re: [PATCH v1 1/2] Enable balloon drivers to report inflated memory



> On Aug 9, 2022, at 17:49, Alexander Atanasov <alexander.atanasov@...tuozzo.com> wrote:
> 
> Display reported in /proc/meminfo as:

Hi,

I am not sure if this is a right place (meminfo) to put this statistic in since
it is the accounting from a specific driver. IIUC, this driver is only installed
in a VM, then this accounting will always be zero if this driver is not installed.
Is this possible to put it in a driver-specific sysfs file (maybe it is better)?
Just some thoughts from me.

Muchun,
Thanks.

> 
> Inflated(total) or Inflated(free)
> 
> depending on the driver.
> 
> Drivers use the sign bit to indicate where they do account
> the inflated memory.
> 
> Amount of inflated memory can be used by:
> - as a hint for the oom a killer
> - user space software that monitors memory pressure
> 
> Cc: David Hildenbrand <david@...hat.com>
> Cc: Wei Liu <wei.liu@...nel.org>
> Cc: Nadav Amit <namit@...are.com>
> 
> Signed-off-by: Alexander Atanasov <alexander.atanasov@...tuozzo.com>
> ---
> Documentation/filesystems/proc.rst |  5 +++++
> fs/proc/meminfo.c                  | 11 +++++++++++
> include/linux/mm.h                 |  4 ++++
> mm/page_alloc.c                    |  4 ++++
> 4 files changed, 24 insertions(+)
> 
> diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
> index 1bc91fb8c321..064b5b3d5bd8 100644
> --- a/Documentation/filesystems/proc.rst
> +++ b/Documentation/filesystems/proc.rst
> @@ -986,6 +986,7 @@ Example output. You may not have all of these fields.
>     VmallocUsed:       40444 kB
>     VmallocChunk:          0 kB
>     Percpu:            29312 kB
> +    Inflated(total):  2097152 kB
>     HardwareCorrupted:     0 kB
>     AnonHugePages:   4149248 kB
>     ShmemHugePages:        0 kB
> @@ -1133,6 +1134,10 @@ VmallocChunk
> Percpu
>               Memory allocated to the percpu allocator used to back percpu
>               allocations. This stat excludes the cost of metadata.
> +Inflated(total) or Inflated(free)
> +               Amount of memory that is inflated by the balloon driver.
> +               Due to differences among balloon drivers inflated memory
> +               is either subtracted from TotalRam or from MemFree.
> HardwareCorrupted
>               The amount of RAM/memory in KB, the kernel identifies as
>               corrupted.
> diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
> index 6e89f0e2fd20..ebbe52ccbb93 100644
> --- a/fs/proc/meminfo.c
> +++ b/fs/proc/meminfo.c
> @@ -38,6 +38,9 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
> 	unsigned long pages[NR_LRU_LISTS];
> 	unsigned long sreclaimable, sunreclaim;
> 	int lru;
> +#ifdef CONFIG_MEMORY_BALLOON
> +	long inflated_kb;
> +#endif
> 
> 	si_meminfo(&i);
> 	si_swapinfo(&i);
> @@ -153,6 +156,14 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
> 		    global_zone_page_state(NR_FREE_CMA_PAGES));
> #endif
> 
> +#ifdef CONFIG_MEMORY_BALLOON
> +	inflated_kb = atomic_long_read(&mem_balloon_inflated_kb);
> +	if (inflated_kb >= 0)
> +		seq_printf(m,  "Inflated(total): %8ld kB\n", inflated_kb);
> +	else
> +		seq_printf(m,  "Inflated(free): %8ld kB\n", -inflated_kb);
> +#endif
> +
> 	hugetlb_report_meminfo(m);
> 
> 	arch_report_meminfo(m);
> diff --git a/include/linux/mm.h b/include/linux/mm.h
> index 7898e29bcfb5..b190811dc16e 100644
> --- a/include/linux/mm.h
> +++ b/include/linux/mm.h
> @@ -2582,6 +2582,10 @@ extern int watermark_boost_factor;
> extern int watermark_scale_factor;
> extern bool arch_has_descending_max_zone_pfns(void);
> 
> +#ifdef CONFIG_MEMORY_BALLOON
> +extern atomic_long_t mem_balloon_inflated_kb;
> +#endif
> +
> /* nommu.c */
> extern atomic_long_t mmap_pages_allocated;
> extern int nommu_shrink_inode_mappings(struct inode *, size_t, size_t);
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index b0bcab50f0a3..12359179a3a2 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -194,6 +194,10 @@ EXPORT_SYMBOL(init_on_alloc);
> DEFINE_STATIC_KEY_MAYBE(CONFIG_INIT_ON_FREE_DEFAULT_ON, init_on_free);
> EXPORT_SYMBOL(init_on_free);
> 
> +#ifdef CONFIG_MEMORY_BALLOON
> +atomic_long_t mem_balloon_inflated_kb = ATOMIC_LONG_INIT(0);
> +#endif
> +
> static bool _init_on_alloc_enabled_early __read_mostly
> 				= IS_ENABLED(CONFIG_INIT_ON_ALLOC_DEFAULT_ON);
> static int __init early_init_on_alloc(char *buf)
> -- 
> 2.31.1
> 
>