Message-Id: <20220812114218.323052-3-carsten.haitzler@foss.arm.com>
Date:   Fri, 12 Aug 2022 12:42:06 +0100
From:   carsten.haitzler@...s.arm.com
To:     linux-kernel@...r.kernel.org
Cc:     coresight@...ts.linaro.org, suzuki.poulose@....com,
        mathieu.poirier@...aro.org, mike.leach@...aro.org,
        leo.yan@...aro.org, linux-perf-users@...r.kernel.org,
        acme@...nel.org
Subject: [PATCH v6 02/14] perf test: Add CoreSight shell lib shared code for future tests

From: "Carsten Haitzler (Rasterman)" <raster@...terman.com>

This adds a library of shell "code" to be shared and used by future
tests that target quality testing for Arm CoreSight support in perf
and the Linux kernel.

Signed-off-by: Carsten Haitzler <carsten.haitzler@....com>
---
 tools/perf/tests/shell/lib/coresight.sh | 132 ++++++++++++++++++++++++
 1 file changed, 132 insertions(+)
 create mode 100644 tools/perf/tests/shell/lib/coresight.sh

diff --git a/tools/perf/tests/shell/lib/coresight.sh b/tools/perf/tests/shell/lib/coresight.sh
new file mode 100644
index 000000000000..45a1477256b6
--- /dev/null
+++ b/tools/perf/tests/shell/lib/coresight.sh
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0
+# Carsten Haitzler <carsten.haitzler@....com>, 2021
+
+# This is sourced from a driver script so no need for #!/bin... etc. at the
+# top - the assumption below is that it runs as part of sourcing after the
+# test sets up some basic env vars to say what it is.
+
+# This currently works with ETMv4 / ETF not any other packet types at thi
+# point. This will need changes if that changes.
+
+# perf record options for the perf tests to use
+PERFRECMEM="-m ,16M"
+PERFRECOPT="$PERFRECMEM -e cs_etm//u"
+
+TOOLS=$(dirname $0)
+DIR="$TOOLS/$TEST"
+BIN="$DIR/$TEST"
+# If the test tool/binary does not exist and is executable then skip the test
+if ! test -x "$BIN"; then exit 2; fi
+DATD="."
+# If the data dir env is set then make the data dir use that instead of ./
+if test -n "$PERF_TEST_CORESIGHT_DATADIR"; then
+	DATD="$PERF_TEST_CORESIGHT_DATADIR";
+fi
+# If the stat dir env is set then make the data dir use that instead of ./
+STATD="."
+if test -n "$PERF_TEST_CORESIGHT_STATDIR"; then
+	STATD="$PERF_TEST_CORESIGHT_STATDIR";
+fi
+
+# Called if the test fails - error code 1
+err() {
+	echo "$1"
+	exit 1
+}
+
+# Check that some statistics from our perf
+check_val_min() {
+	STATF="$4"
+	if test "$2" -lt "$3"; then
+		echo ", FAILED" >> "$STATF"
+		err "Sanity check number of $1 is too low ($2 < $3)"
+	fi
+}
+
+perf_dump_aux_verify() {
+	# Some basic checking that the AUX chunk contains some sensible data
+	# to see that we are recording something and at least a minimum
+	# amount of it. We should almost always see Fn packets in just about
+	# anything but certainly we will see some trace info and async
+	# packets
+	DUMP="$DATD/perf-tmp-aux-dump.txt"
+	perf report --stdio --dump -i "$1" | \
+		grep -o -e I_ATOM_F -e I_ASYNC -e I_TRACE_INFO > "$DUMP"
+	# Simply count how many of these packets we find to see that we are
+	# producing a reasonable amount of data - exact checks are not sane
+	# as this is a lossy process where we may lose some blocks and the
+	# compiler may produce different code depending on the compiler and
+	# optimization options, so this is rough just to see if we're
+	# either missing almost all the data or all of it
+	ATOM_FX_NUM=`grep I_ATOM_F "$DUMP" | wc -l`
+	ASYNC_NUM=`grep I_ASYNC "$DUMP" | wc -l`
+	TRACE_INFO_NUM=`grep I_TRACE_INFO "$DUMP" | wc -l`
+	rm -f "$DUMP"
+
+	# Arguments provide minimums for a pass
+	CHECK_FX_MIN="$2"
+	CHECK_ASYNC_MIN="$3"
+	CHECK_TRACE_INFO_MIN="$4"
+
+	# Write out statistics, so over time you can track results to see if
+	# there is a pattern - for example we have less "noisy" results that
+	# produce more consistent amounts of data each run, to see if over
+	# time any techinques to  minimize data loss are having an effect or
+	# not
+	STATF="$STATD/stats-$TEST-$DATV.csv"
+	if ! test -f "$STATF"; then
+		echo "ATOM Fx Count, Minimum, ASYNC Count, Minimum, TRACE INFO Count, Minimum" > "$STATF"
+	fi
+	echo -n "$ATOM_FX_NUM, $CHECK_FX_MIN, $ASYNC_NUM, $CHECK_ASYNC_MIN, $TRACE_INFO_NUM, $CHECK_TRACE_INFO_MIN" >> "$STATF"
+
+	# Actually check to see if we passed or failed.
+	check_val_min "ATOM_FX" "$ATOM_FX_NUM" "$CHECK_FX_MIN" "$STATF"
+	check_val_min "ASYNC" "$ASYNC_NUM" "$CHECK_ASYNC_MIN" "$STATF"
+	check_val_min "TRACE_INFO" "$TRACE_INFO_NUM" "$CHECK_TRACE_INFO_MIN" "$STATF"
+	echo ", Ok" >> "$STATF"
+}
+
+perf_dump_aux_tid_verify() {
+	# Specifically crafted test will produce a list of Tread ID's to
+	# stdout that need to be checked to  see that they have had trace
+	# info collected in AUX blocks in the perf data. This will go
+	# through all the TID's that are listed as CID=0xabcdef and see
+	# that all the Thread IDs the test tool reports are  in the perf
+	# data AUX chunks
+
+	# The TID test tools will print a TID per stdout line that are being
+	# tested
+	TIDS=`cat "$2"`
+	# Scan the perf report to find the TIDs that are actually CID in hex
+	# and build a list of the ones found
+	FOUND_TIDS=`perf report --stdio --dump -i "$1" | \
+			grep -o "CID=0x[0-9a-z]\+" | sed 's/CID=//g' | \
+			uniq | sort | uniq`
+	# No CID=xxx found - maybe your kernel is reporting these as
+	# VMID=xxx so look there
+	if test -z "$FOUND_TIDS"; then
+		FOUND_TIDS=`perf report --stdio --dump -i "$1" | \
+				grep -o "VMID=0x[0-9a-z]\+" | sed 's/VMID=//g' | \
+				uniq | sort | uniq`
+	fi
+
+	# Iterate over the list of TIDs that the test says it has and find
+	# them in the TIDs found in the perf report
+	MISSING=""
+	for TID2 in $TIDS; do
+		FOUND=""
+		for TIDHEX in $FOUND_TIDS; do
+			TID=`printf "%i" $TIDHEX`
+			if test "$TID" -eq "$TID2"; then
+				FOUND="y"
+				break
+			fi
+		done
+		if test -z "$FOUND"; then
+			MISSING="$MISSING $TID"
+		fi
+	done
+	if test -n "$MISSING"; then
+		err "Thread IDs $MISSING not found in perf AUX data"
+	fi
+}
-- 
2.32.0

Powered by blists - more mailing lists