linux-kernel - Re: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 12 Aug 2022 09:13:53 -0600
From:   Rob Herring <robh@...nel.org>
To:     wei.fang@....com
Cc:     andrew@...n.ch, pabeni@...hat.com, robh+dt@...nel.org,
        f.fainelli@...il.com, hkallweit1@...il.com, netdev@...r.kernel.org,
        krzysztof.kozlowski+dt@...aro.org, linux-kernel@...r.kernel.org,
        davem@...emloft.net, linux@...linux.org.uk, edumazet@...gle.com,
        kuba@...nel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property

On Sat, 13 Aug 2022 00:50:08 +1000, wei.fang@....com wrote:
> From: Wei Fang <wei.fang@....com>
> 
> The hibernation mode of Atheros AR803x PHYs is default enabled.
> When the cable is unplugged, the PHY will enter hibernation
> mode and the PHY clock does down. For some MACs, it needs the
> clock to support it's logic. For instance, stmmac needs the PHY
> inputs clock is present for software reset completion. Therefore,
> It is reasonable to add a DT property to disable hibernation mode.
> 
> Signed-off-by: Wei Fang <wei.fang@....com>
> ---
>  Documentation/devicetree/bindings/net/qca,ar803x.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/net/qca,ar803x.yaml:46:5: [error] syntax error: could not find expected ':' (syntax)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/net/qca,ar803x.example.dts'
Documentation/devicetree/bindings/net/qca,ar803x.yaml:46:5: could not find expected ':'
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/qca,ar803x.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/net/qca,ar803x.yaml:46:5: could not find expected ':'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/qca,ar803x.yaml: ignoring, error parsing file
make: *** [Makefile:1404: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.